Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which item represents a secure method of transmitting fault data with Cisco Call Home?
A. IPsec
B. SSL email
C. secure XML
D. Cisco Transport Gateway
E. RSA Digital Certificate
Answer: D
Q2. When cabling a Cisco UCS 6200 Series Fabric Interconnect to disjoint Layer 2 networks, which option must be considered?
A. The fabric interconnect must be in switching mode.
B. You must first configure a LAN pin group.
C. Each VLAN is allowed across multiple disjoint uplinks.
D. Each vNIC can communicate to a single disjoint network.
Answer: D
Q3. Which BIOS setting is required for a VMware ESXi 5.0 host to support Cisco VM-FEX universal pasthrough mode?
A. VT for Directed IO
B. ACPI 10 Support
C. VEMDPA Agent
D. Execute Disabled Bit
E. Processor C State
Answer: A
Q4. Which three items are supported operating systems of the Cisco VM-FEX universal passthrough? (Choose three.)
A. Oracle Solaris 11
B. Red Hat Enterprise Linux 6.0
C. Microsoft Windows Server 2003 SP3
D. Microsoft Windows Server 2008
E. Ubuntu Server 12.2
F. SLES 11
Answer: BDF
Q5. What is the maximum number of ports on a VMware vCenter Distributed Virtual Switch?
A. 64
B. 128
C. 1024
D. 4096
E. 8192
Answer: D
Q6. The Cisco UCS administrator has the chassis discovery policy set to "2-link". The administrator connects a new chassis to the Cisco UCS 6200 Series Fabric Interconnects using four links. Which option about link utilization is true?
A. The Cisco UCS will use two links until the chassis is reacknowledged, after which it will use all four links.
B. The Cisco UCS will use all four links for discovery.
C. The Cisco UCS will use only two links. The other two links are unusable.
D. The Cisco UCS will use only two links. However, the administrator can manually pin traffic to the extra links by using service profiles.
Answer: A
Q7. Which NIC redundancy modes allow the LOMs to be discovered by the operating system or hypervisor?
A. Dedicated mode
B. Active/Active
C. Active/Standby
D. Cisco Card Mode
Answer: A
Q8. How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains?
A. Automatic pinning is disabled; VLAN membership must be statically pinned to the uplink ports.
B. VLANs must be divided between the fabric interconnects using PIN groups.
C. The VLAN traffic for a disjoint network can only travel along an uplink that is specifically assigned to this VLAN and is selectively excluded from all other uplinks.
D. When you configure disjoint Layer 2 networks, you must assign VLANs to uplink interfaces.
Answer: C
Q9. Which three items represent some of the components to implement Cisco VM-FEX for Cisco Unified Computing System Manager B-Series blades? (Choose three.)
A. Cisco VSM VM
B. VEM installed on the VMware vCenter server
C. VEM in the VMware ESX or ESXi host
D. Cisco Unified Computing System Manager version 1.2 or higher
E. VMware vCenter server
F. Fibre Channel VMFS volume
Answer: CDE
Q10. Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)
A. End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP.
B. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches.
C. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses.
D. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.
E. A MAC forwarding table is not used to forward traffic to the uplink switch.
F. A MAC address forwarding table is maintained for server-to-server communications across VLANs.
Answer: DE
Q11. Your systems engineer has determined all of the firmware versions that the server operating system supports. What steps are taken on Cisco UCS to avoid manual firmware upgrades on the blade servers?
A. Use Cisco UCS Manager firmware management to upgrade all Cisco UCS blade servers to the same target firmware versions.
B. Configure host firmware package and management firmware package policies and associate the firmware policies with the service profiles.
C. Create a BIOS policy and define the host firmware package and management firmware package.
D. Configure host firmware package and management firmware package policies and associate the firmware policies with the server pools.
Answer: B
Q12. What is the purpose of the maximum ports that are filed in the port profile?
A. determines the maximum number of uplinks that VMs can use
B. determines the maximum number of VMs that can use the DVS
C. determines the maximum number of DVSs that can use the port profile
D. determines the maximum number of dynamic vNICS on the DVS
Answer: D
Q13. What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS C-Series server?
A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP enabled
B. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and DHCP enabled
C. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP disabled
D. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabled
E. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP enabled
Answer: D
Q14. If there are four I/O module links from the Cisco Unified Computing System 5108 Blade Chassis to the Cisco Unified Computing System 6248UP Fabric Interconnect, which dynamic vNICs can be defined?
A. 9
B. 16
C. 24
D. 48
E. 54
F. 112
Answer: E
Q15. Which two policies can be configured in a port profile for VM-FEX high-performance mode? (Choose two.)
A. QoS policy
B. network control policy
C. adapter policy
D. BIOS policy
E. vNIC connection policy
Answer: AC
Q16. Which of the following are true concerning authentication within a Cisco Unified Computing System?
A. Authentication domains are used to leverage individual authentication systems.
B. You can create up to 64 authentication domains, each associated with a provider group and realm in Cisco Unified Computing System Manager.
C. At login, the user can select the authentication domain to be used.
D. Cisco Unified Computing System supports LDAP or RADIUS for remote authentication.
E. A locally authenticated user account is authenticated directly through the fabric interconnect.
Answer: E
Q17. In a standalone Cisco UCS C-Series server, which recommendations can be used to upgrade the BIOS?
A. Cisco IMC
B. Cisco UCS Manager
C. iFlash32 Utility
D. Flash ROM Utility
E. EFI Interface
F. Cisco Host Upgrade Utility
G. USB Flash Utility
Answer: F
Q18. How many links are there between a second-generation IOM (Cisco UCS 2204 or 2208) and a third-generation half-width blade (Cisco UCS B200 M3 or B22 M3) in a Cisco UCS system?
A. 1
B. 2
C. 4
D. 8
Answer: C
Q19. The Cisco UCS 6200 Series Fabric Interconnects offer a new feature that allows dynamic port allocation for all of the 10 Gigabit Ethernet interfaces. What are these ports called?
A. universal ports
B. flex ports
C. unified ports
D. converged ports
Answer: C
Q20. Which two VMware features will not allow an adapter to transition from Cisco VM-FEX standard mode to universal passthrough mode? (Choose two.)
A. VM Snapshot
B. Volume Shadow Copy
C. Storage vMotion
D. HA
E. Resource Reservations
Answer: AC
Q21. Which two items represent the features of Call Home on the Cisco Unified Computing System? (Choose two.)
A. syslog
B. send fault details to Cisco TAC
C. SNMP trap receiver
D. send email alerts to administrators
E. central repository of normalized fault data
Answer: BD