Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. You are the Office 365 administrator for your company.
The company requests that you implement a document collaboration and social networking solution that meets the following requirements:
. Users must be able to join groups to receive project updates.
. Any user must be able to post an event.
You need to implement a solution.
Which solution should you implement?
A. Microsoft SharePoint document libraries
B. Microsoft Yammer
C. Microsoft SkyDrive Pro
D. Microsoft SharePoint newsfeeds
Answer: B
Q2. Your company has an Office 365 subscription. You need to add the label "External" to the subject line of each email message received by your organization from an external sender.
What should you do?
A. From the Exchange Control Panel, add a MailTip.
B. From the Forefront Online Protection Administration Center, set the footer for outbound email.
C. Run the Enable-InboxRule cmdlet.
D. From the Exchange Control Panel, run the New Rule wizard.
Answer: D
Q3. You are the Office 365 administrator for Contoso, Ltd.
Some email messages sent from the trusted domain fabrikam.com are being rejected as spam. Some of these email messages originate inside the fabnkam.com network, and some of them originate from an application in the fabrikam.com co-located data center.
The fabrikam.com systems administrators have asked you to add their domain and the IP addresses of the data center that hosts their external application to your list of safe senders.
You need to configure Microsoft Exchange Online Protection.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Configure a content filter to allow the fabrikam.com domain.
B. Configure a mail flow rule to bypass spam filtering for the data center IP address range.
C. Create a connection filter to allow the data center IP address range.
D. Add the fabrikam.com domain as an accepted domain.
E. Create an inbound connector for the fabrikam.com domain.
F. Configure a mail flow rule to bypass spam filtering for the fabrikam.com domain.
Answer: C,F
Explanation:
References: http://blogs.msdn.com/b/tzink/archive/2013/07/02/how-to-use-safe-senders-in-eop-and-fope.aspx http://www.msexchange.org/kbase/ExchangeServerTips/MicrosoftOffice365/ExchangeOnline/safe-andblocked-senders-list-owa-2013-and-office-365.html http://technet.microsoft.com/en-GB/library/dn198251(v=exchg.150).aspx
Connection Filters
http://technet.microsoft.com/en-us/library/jj200718(v=exchg.150).aspx
Q4. You administer Microsoft Exchange Online for Fabrikam, Inc. Fabrikam's Exchange Online tenant domain name is fabrikam.onmicrosoft.com.
You verify the domain fabrikam.com in the Office 365 admin center and instruct other administrators to configure new Exchange Online users with fabrikam.com as the primary SMTP domain. The fabrikam.com domain is not federated.
A user reports that his reply-to address is displayed to external email message recipients as User1@fabrikam.onmicrosoft.com.
You need to configure the user's mailbox to meet the following requirements:
. The user's reply-to address must be User1@fabrikam.com.
. The email address User1@fabrikam.onmicrosoft.com must function as a secondary email address for the user.
Which Windows PowerShell command should you run?
A. Set MsolUser -UserPrincipalNameUser1@fabrikam.onmicrosoft.com -AlternateEmailAddresses user1@fabrikam.com
B. Set-Mailbox -Identity user1@fabrikam.onmicrosoft.com -ForwardingAddress "User 1"
C. Set-Mailbox -Identity user1@fabrikam.onmicrosoft.com -WindowsEmailAddressUser1@fabrikam.com
D. Set-Mailbox -Identity user1@fabrikam.onmicrosoft.com -EmailAddresses user1@fabrikam.onmicrosoft.com, user1@fabrikam.com
Answer: C
Q5. Your company uses Microsoft Exchange Online. Employees frequently need to change their primary email addresses.
The messaging operations team has requested a script to simplify the process of changing email addresses.
The script must perform the following actions:
. Obtain employee information from a .csv file that has a header line of UserPrincipalName,CurrentPrimaryAddress,NewPrimaryAddress.
. Change employees' primary email addresses to the values in the NewPrimaryAddress column.
. Retain employees' current email addresses as secondary addresses.
You create the following Windows PowerShell script to read the .csv file. Line numbers are included for reference only.
You need to complete the script to meet the requirements.
Which Windows PowerShell command should you insert at line 06?
A. Set-Mailbox -Identity $UserPrincipalName -WindowsEmailAddress $NewPrimary
B. Set-Mailbox -Identity $UserPrincipalName -PrimarySmtpAddress $NewPrimary
C. Set-Mailbox -Identity $UserPrincipalName -ExternalEmailAddress $NewPrimary
D. Set-MailUser -Identity $UserPrincipalName -EmailAddresses@{add = "SMTP:" + "$NewPrimary"; remove="SMTP:" + "$OldPrimary"}
Answer: D
Q6. DRAG DROP
Your company has an Office 365 subscription and uses Microsoft Exchange Online. Employees have archive mailboxes that have the default retention policy applied.
A new company policy requires some existing mailboxes to have a retention policy that deletes only email messages in the Deleted Items folder after 90 days. Deleted messages must be recoverable. None of the existing retention tags meet the new requirement.
You create an empty retention policy named Policy-90.
You need to configure the retention policy and apply it to the mailboxes.
How should you complete the relevant Windows PowerShell script? To answer, drag the appropriate code segments to the correct targets. Each segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q7. You manage an Office 365 tenant that uses an Enterprise E1 subscription. You configure a retention policy for all mailboxes.
You must apply a new retention policy immediately because of upcoming personnel changes.
You need to ensure that the new retention policy is applied to the mailboxes immediately.
Which Windows PowerShell cmdlet should you run?
A. Enable-JournalRule
B. New-RetentionPolicyTag
C. Start-ManagedFolderAssistant
D. Set-CsUser
E. Set-CsPrivacyConfiguration
F. Set-HostedContentFilterPolicy
G. Set-MalwareFilterPolicy
H. Set-MailboxJunkEmailConfiguration
Answer: B
Explanation:
Use the New-RetentionPolicyTag cmdlet to create a retention tag. Retention tags are used to apply retention settings to folders and individual items such as e-mail messages and voice mail. These settings specify how long a message remains in a mailbox and the action to be taken when the message reaches the specified retention age. When a message reaches its retention age, it's moved to the user’s In-Place Archive or deleted.
Reference: New-RetentionPolicyTag
https://technet.microsoft.com/en-us/library/dd335226(v=exchg.150).aspx
Q8. HOTSPOT
Your company has an Office 365 subscription and uses Microsoft Lync Online. The environment includes the domains shown in the following image, and is configured as shown in the exhibit. (Click the Exhibit button.)
Lync is not deployed in a hybrid configuration.
An employee requires specific Lync communication settings. The employee’s account is configured as shown in the following image.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point.
Answer:
Q9. A company uses Skype for Business Online. You use contoso.com as the verified domain name for the Office 365 tenant. Users conduct Skype online meetings. You add fabricam.com to the tenant and configure the tenant to use this domain name.
You need to ensure that all Skype online meeting URLs contain the new domain name.
Which Windows PowerShell cmdlet should you run?
A. Update-CsTenantMeetingUrl
B. Set-CsMeetingConfiguration
C. Set-CsUser
D. Set-CsMeetingRoom
E. New-CsSimpleURL
Answer: E
Explanation:
The New-CsSimpleURL command Creates a new simple URL, which can then be added to a simple URL configuration collection. Simple URLs make it easier for users to join meetings and conferences, and also make it easier for administrators to log on to the Skype for Business Server Control Panel.
Example: The example shows how a new URL can be added to an existing collection of simple URLs. To begin with, the first command in the example uses the New-CsSimpleUrlEntry cmdlet to create a URL entry that points to https://meet.fabrikam.com; this URL entry is stored in a variable named $urlEntry. In the second command, the New-CsSimpleUrl cmdlet is used to create an in-memory-only instance of a simple URL. In this example, the URL Component is set to Meet; the domain is set to fabrikam.com; the ActiveUrl is set to https://meet.fabrikam.com; and the SimpleUrl
property is set to $urlEntry, with $urlEntry being the URL entry created in the first
command.
After the URL has been created (and stored in the object reference $simpleUrl) the final command in the example adds the new URL to the simple URL collection for the Redmond site. This is done by using the Set-CsSimpleUrlConfiguration cmdlet, the SimpleUrl parameter, and the parameter value @{Add=$simpleUrl}. This syntax causes the URL stored in the object reference $simpleUrl to be added to the SimpleUrl property.
$urlEntry = New-CsSimpleUrlEntry -Url "https://meet.fabrikam.com"
$simpleUrl = New-CsSimpleUrl -Component "meet" -Domain "fabrikam.com" -
SimpleUrlEntry $urlEntry -ActiveUrl "https://meet.fabrikam.com"
Set-CsSimpleUrlConfiguration -Identity "site:Redmond" -SimpleUrl @{Add=$simpleUrl}
Incorrect:
Not A: The Update-CsTenantMeetingUrl command updates the meeting URL for the specified Lync Online tenant. The updated URL uses a simpler, more standardized format that makes it easier for clients to locate and connect to meetings.
Example:
The command shown in example updates the meeting URL for the tenant with the tenant ID 38aad667-af54-4397-aaa7-e94c79ec2308. (Note that you must supply the tenant ID in order for this command to complete.) After pressing ENTER to run the command, you will be asked if you are sure you want to update the meeting URL. You must answer yes to this prompt before Update-CsTenantMeetingUrl will actually make any changes to your Lync Online configuration settings.
Update-CsTenantMeetingUrl -Tenant "38aad667-af54-4397-aaa7-e94c79ec2308"
Not B: Set-CsMeetingConfiguration enables you to modify the meeting configuration settings currently in use in your organization. Meeting configuration settings help dictate the type of meetings (also called conferences) that users can create, and also control how (or even if) anonymous users and dial-in conferencing users can join these meetings. Note that these settings only affect scheduled meetings; they do not affect ad-hoc meetings created by clicking the Meet Now option in Skype for Business.
Reference: New-CsSimpleUrl
https://technet.microsoft.com/en-us/library/gg398180.aspx
Q10. DRAG DROP
You are the Office 365 administrator for your company.
You have been receiving many unsolicited email messages originating from another country. Many of those messages contain foreign-language content.
You need to configure Microsoft Exchange Online Protection to filter messages based on the language content and IP addresses of the country or region of origin.
Which filters and options should you configure? To answer, drag the appropriate answer choices to the correct targets. Each answer choice may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q11. DRAG DROP
You have an Office 365 tenant that uses an Enterprise E3 subscription.
You must prevent five specific users from using Skype for Business Online to send instant messages to external users. All other users must be able to send instant messages to both internal and external users.
You need to configure the environment.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q12. DRAG DROP
You are the Office 365 administrator for your company. Your company uses Microsoft SharePoint Online to share documents with internal and external users.
A document associated with a bidding process was shared in the environment. Guest access to the document was provided to several vendors. The bidding process has now ended.
You need to revoke vendor access to the document.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q13. You are the Office 365 administrator for your company. The company uses Office 365 ProPlus and has multiple Microsoft SharePoint Online sites.
The company recently started a project that requires employees to collaborate with external users on the development of a set of documents that are stored in a team site.
You need to ensure that external users can access and edit the documents without affecting the security of other content.
What should you do?
A. Configure and share guest links to the documents for the external users.
B. Configure and share a guest link to the existing SharePoint team site for the external users.
C. Share documents by using the Share function and adding the external users to the Contributors group.
D. Share the existing SharePoint team site by using the Share function and adding the external users to the Contributors group.
Answer: A
Explanation: If you perform work that involves sharing documents or collaborating directly with vendors, clients, or customers, then you might want to use your sites to share content with people outside your organization who do not have licenses for your Office 365 subscription.
There are three ways that you can do this:
* You can send users a guest link that they can use to view individual documents on your site anonymously.
* You can share an entire site by inviting external users to sign in to your site using a Microsoft account* or a work account.
* You can share individual documents by inviting external users to sign in to your site using a Microsoft account* or a workacct_short.
Reference: Share sites or documents with people outside your organization
https://support.office.com/en-AU/article/Share-sites-or-documents-with-people-outside-your-organization-5f4cee39-5c91-4dc8-8fb1-96bca76f4eb0
Q14. You are the Office 365 administrator for your company. The company allows external communications through Microsoft Lync Online for all domains.
The call center manager reports that call center personnel are spending too much time chatting with friends and not enough time taking calls. She requests that the call center personnel be blocked from chatting with anyone external to the company by using Lync Online. They still must be able to communicate with internal users.
You need to prevent all call center personnel from communicating with external contacts by using Lync Online, while still allowing other employees to communicate with external contacts.
What should you do?
A. In the Lync admin center, select all users, edit their external communications settings, and clear the Lync Users check box.
B. On the External Communications page of the Lync admin center, turn off external access.
C. In the Lync admin center, remove the Lync Online license from each of the call center personnel.
D. In the Lync admin center, select all call center personnel, edit their external communications settings, and clear the People on Public IM Networks check box.
Answer: D
Q15. You are the Microsoft Lync administrator for a company that uses Lync Online.
The company has mandated that employees may use Lync Online to communicate with contacts from approved external domains.
You need to configure Lync Online to allow Lync federation with only three specific domains. You must achieve this goal by using the least amount of administrative effort.
Which two actions should you perform? Each correct answer presents part of the solution.
A. In the Lync admin center, set the External Access option to On except for blocked domains.
B. In the Office 365 admin center, add the three domains to the domain list and set the domain intent for each domain to Lync Online.
C. In the Lync admin center, set the External Access option to Off completely.
D. In the Lync admin center, set the External Access option to On only for allowed domains.
E. In the Lync admin center, configure the Presence Privacy Mode option to display presence information only to the users' contacts.
F. In the Lync admin center, add the three domains to the Blocked Or Allowed Domains list.
Answer: D,F
Explanation:
References: http://solveit.openjive.com/post/2014/01/27/Lync-Federation-with-Office-365Lync-Online http://technet.microsoft.com/en-us/library/hh852512.aspx http://technet.microsoft.com/en-us/library/jj205126.aspx