Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 2)
Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image.
You want to achieve this goal by using the minimum amount of administrative effort.
Which command should you run first?
A. dism.exe /image:c:\Server12.wim /enable-feature /featurename:servermigration
B. dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
C. imagex.exe /capture c: c:\Server12.wim "windows server 2012 r2 datacenter"
D. imagex.exe /apply c:\Server12.wim 4 c:\
Answer: B
Explanation:
This command will mount the image before making any changes.
References:
http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx
Q2. - (Topic 2)
Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following table.
You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets.
Which command should you run?
A. route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
B. route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
C. route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
D. route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
Answer: B
Explanation:
These parameters will allow communication with all the hosts.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6
addressing, p.192, 196
Q3. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a domain controller, named ENSUREPASS-DC01, which has Windows Server 2012 R2 installed. Another Contoso.com domain controller, named ENSUREPASS-DC02, has Windows Server 2008 R2 installed.
You have deployed a server, named ENSUREPASS-SR15, on Contoso.com’s perimeter network. ENSUREPASSSR15 is running a Server Core Installation of Windows Server 2012 R2.
You have been instructed to make sure that ENSUREPASS-SR15 is part of the Contoso.com domain.
Which of the following actions should you take?
A. You should consider making use of Set-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
B. You should consider making use of Get-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
C. You should consider making use of Test-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
D. You should consider making use of Add-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
Answer: D
Explanation:
Add-Computer – Add the local computer to a domain or workgroup.
Q4. HOTSPOT - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a virtual machine on Hyperv1.
Users report that the time on their client computer is incorrect.
You log on to DC1 and verify that the time services are configured correctly.
You need to prevent time conflicts between the time provided by DC1 and other potential
time sources.
What should you configure?
To answer, select the appropriate object in the answer area.
Answer:
Q5. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-SR07. You want to achieve this remotely from a server, named ENSUREPASS-SR06.
Which of the following actions should you take?
A. You should consider accessing the Server Manager console on ENSUREPASS-SR07.
B. You should consider accessing the Server Manager console on ENSUREPASS-SR06.
C. You should consider accessing the TS Manager console on ENSUREPASS-SR07
D. You should consider accessing the TS Manager console on ENSUREPASS-SR06.
Answer: B
Q6. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
An administrator creates a security template named Template1.
You need to apply Template1 to Server1.
Which snap-in should you use?
A. Resultant Set of Policy
B. Security Configuration and Analysis
C. Authorization Manager
D. Security Templates
Answer: B
Explanation:
The Security Configuration and Analysis tool contains the Local Security Policy snap-in that is used to apply templates.
References:
http://technet.microsoft.com/en-us/library/bb742512.aspx http://technet.microsoft.com/en-us/library/cc739442%28v=WS.10%29.aspx
Q7. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2. You need to create 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. File Server Resource Manager (FSRM)
B. New-StoragePool
C. Diskpart
D. Share and Storage Management
Answer: C
Explanation:
You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000
Q8. DRAG DROP - (Topic 1)
Your network contains three servers. The servers are configured as shown in the following tablE.
Your company plans to standardize all of the servers on Windows Server 2012 R2.
You need to recommend an upgrade path for each server.
The solution must meet the following requirements: . Upgrade the existing operating system whenever possible. . Minimize hardware purchases. Which upgrade path should you recommend for each server?
To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.
Answer:
Q9. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
Contoso.com has a Hyper-V server, named ENSUREPASS-SR13, which hosts multiple virtual machines.
You have enabled the use of Single-root I/O virtualization.
Which of the following is TRUE with regards to using Single-root I/O virtualization? (Choose all that apply.)
A. It maximizes network throughput, while minimizing network latency.
B. It maximizes network throughput, as well as network latency.
C. It avoids the virtual switch stack and allows the virtual machine direct access to the actual network switch.
D. It prevents the virtual machine from accessing the network switch directly.
Answer: A,C
Explanation:
SR-IOV enables network traffic to bypass the software switch layer of the Hyper-V virtualizationstack. Because the VF is assigned to a child partition, the network traffic flows directly between the VF and child partition. As a result, the I/O overhead in the software emulation layer is diminished and achieves network performance that is nearly the same performance as in nonvirtualized environments.
Q10. - (Topic 3)
Your company’s security policy states that all of the servers deployed to a branch office must not have the graphical user interface (GUI) installed. In a branch office, a support technician installs a server with a GUI installation of Windows Server 2012 on a new server, and then configures the server as a DHCP server.
You need to ensure that the new server meets the security policy. You want to achieve this goal by using the minimum amount of Administrative effort.
What should you do?
A. Reinstall Windows Server 2012 on the server.
B. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE.
D. From Server Manager, uninstall the User Interfaces and Infrastructure feature.
Answer: D
Q11. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Server1 that runs Windows Server 2012 R2. Server1 contains a local group named Group1.
You share a printer named Printer1 on Server1.
You need to configure Printer1 to meet the following requirements:
. Ensure that the members of Group1, the Server Operators group, the Administrators group, and the Print Operators group can send print jobs to Printer1.
. Prevent other users from sending print jobs to Printer1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Remove the permissions for the Creator Owner group.
B. Assign the Print permission to the Administrators group.
C. Remove the permissions for the Everyone group.
D. Assign the Print permission to the Server Operators group.
E. Assign the Print permission to Group1.
Answer: C,E
Explanation:
C. To prevent other users from sending print jobs to Printer1
E. To enable Group1 to send print jobs.
Note: The Server Operators group, the Administrators group, and the Print Operators group
are all built-in and already have permissions to send print jobs.
Q12. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet_Tor can connect to the client computers in Subnet_Mtl by using an IP address or a FQDN. You discover that the DHCP clients in Subnet_Mtl can connect to client computers in Subnet_Tor by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?
A. The 006 DNS Servers option to Subnet_Mtl
B. The 006 DNS Servers option to Subnet_Tor
C. The 015 DNS Domain Name option to Subnet_Mtl
D. The 015 DNS Domain Name option to Subnet_Tor
Answer: A
Q13. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of an Active Directory forest that contains a root domain, named Contoso.com, and two child domains, named us.Contoso.com and uk.Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
The root domain hosts a domain local distribution group, named ENSUREPASSGroup. You are preparing to issue ENSUREPASSGroup read-only access to a shared folder hosted by the us.Contoso.com domain.
You want to make sure that ENSUREPASSGroup is able to access the shared folder in the us.Contoso.com domain.
Which of the following actions should you take?
A. You should consider re-configuring ENSUREPASSGroup as a universal Admins group.
B. You should consider re-configuring ENSUREPASSGroup as a universal security group.
C. You should consider re-configuring ENSUREPASSGroup as a global administrators group.
D. You should consider re-configuring ENSUREPASSGroup as a local administrators group.
Answer: B
Q14. HOTSPOT - (Topic 3)
Your network contains a server named Server1 that runs Windows Server 2012 R2. App1
has the Print and Document Services server role installed.
All client computers run Windows 8.
The network contains a network-attached print device named Printer1.
From App1, you share Printer1.
You need to ensure that users who have connected to Printer1 previously can print to
Printer1 if App1 fails.
What should you configure? To answer, select the appropriate option in the answer area.
Answer:
Q15. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1.Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From the Services console, configure the General settings.
B. From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
C. From a command prompt, run sc.exe and specify the config parameter.
D. From a command prompt, run sc.exe and specify the privs parameter.
Answer: C
Explanation:
Executing the ss.exe command with the config parameter will modify service configuration.
Topic 3, Volume C