Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. HOTSPOT - (Topic 1)
A printer named Printer1 is configured as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Q2. HOTSPOT - (Topic 1)
You have a Hyper-V host named Hyperv1 that runs Windows Server 2012 R2. Hyperv1 hosts a virtual machine named Server1. Server1 uses a disk named Server1.vhdx that is stored locally on Hyperv1.
You stop Server1, and then you move Server1.vhdx to an iSCSI target that is located on another server.
You need to configure Server1 to meet the following requirements:
. Ensure that Server1 can start by using Server1.vhdx.
. Prevent Server1.vhdx from consuming more than 500 IOPS on the iSCSI target.
Which two objects should you configure?
To answer, select the appropriate two objects in the answer area.
Answer:
Q3. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1 in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?
A. From Print Management, configure the Sharing settings of Printer1.
B. From Active Directory Users and Computers, configure the Security settings of Server1-Printer1.
C. From Print Management, configure the Security settings of Printer1.
D. From Print Management, configure the Advanced settings of Printer1.
Answer: C
Explanation:
If you navigate to the Security tab of the Print Server Properties you will find the Permissions that you can set to Allow which will provide Group1 with the ability to manage Printer1.
Set permissions for print servers
Open Print Management.
In the left pane, click Print Servers, right-click the applicable print server and then
click Properties.
On the Security tab, under Group or users names, click a user or group for which
you want to set permissions.
Under Permissions for <user or group name>, select the Allow or Deny check
boxes for the permissions listed as needeD.
To edit Special permissions, click Advanced.
On the Permissions tab, click a user group, and then click Edit.
In the Permission Entry dialog box, select the Allow or Deny check boxes for the
permissions that you want to edit.
Q4. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
Contoso.com has its headquarters in London, and several widespread satellite offices. When Contoso.com releases a new written policy stating that the graphical user interface (GUI) should not be installed on any servers deployed to Contoso.com’s satellite offices.
It is reported that a server in one of the satellite offices are not compliant with the new written policy.
You are required to remedy the situation, while using the least amount of user interaction.
Which of the following actions should you take?
A. You should consider uninstalling the User Interfaces and Infrastructure feature using a PowerShell cmdlet.
B. You should consider uninstalling the User Interfaces and Infrastructure feature via TS Manager.
C. You should consider uninstalling the User Interfaces and Infrastructure feature via Server Manager.
D. You should consider uninstalling the User Interfaces and Infrastructure feature using the Dsrm.exe command from the command prompt.
Answer: C
Explanation:
Although you could utilize a PowerShell cmdlet, it would require you to either log on to the remote machine to enable PowerShell remoting first (or to use the local PowerShell console). Using Server Manager, you could just add the server (if it wasn't already added) and use the "Remove Roles and Features" applet.
Q5. DRAG DROP - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and is configured as the only domain controller.
You need to retrieve a list of all the user accounts. The list must include the last time each user was authenticated successfully.
Which Windows PowerShell command should you run?
To answer, drag the appropriate cmdlet or property to the correct locations to complete the PowerShell command in the answer area. Each cmdlet or property may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q6. - (Topic 2)
You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit. (Click the Exhibit button.)
You need to create a storage pool that contains Disk 1 and Disk 2. What should you do first?
A. Delete volume E
B. Convert Disk 1 and Disk 2 to dynamic disks
C. Convert Disk 1 and Disk 2 to GPT disks
D. Create a volume on Disk 2
Answer: A
Explanation:
A. Storage Pools use unallocated space There is no way to create a storage pool with existing data. Storage pools are only a collection of drives that are managed by windows.
Q7. HOTSPOT - (Topic 2)
You have a server named Server 1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters and is located in a perimeter network. You need to install a DHCP Relay Agent on Server1. Which node should you use to add the DHCP Relay Agent? To answer, select the
appropriate node in the answer area.
Answer:
Q8. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
An organizational unit (OU) named OU1 contains the computer accounts for laptops and
desktop computers.
A Group Policy object (GPO) named GP1 is linked to OU1.
You need to ensure that the configuration settings in GP1 are applied only to a user named
User1.
What should you do?
A. Modify the security settings of OU1.
B. Modify the GPO Status of GP1.
C. Modify the security settings of GP1.
D. Configure the WMI Filter of GP1.
Answer: C
Explanation:
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group Policy, p. 470, 482 http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC
Q9. - (Topic 3)
Your network contains an Active Directory domain named adatum.com. The domain contains three domain controllers.
The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.
You plan to remove DC3 from the domain.
You log on to DC3.
You need to identify which service location (SRV) records are registered by DC3.
What should you do?
A. Open the %windir%\system32\config\netlogon.dns file.
B. Run dcdiag /test:dns
C. Open the %windir%\system32\dns\backup\adatum.com.dns file.
D. Run ipconfig /displaydns.
Answer: A
Explanation:
A. Netlogon service creates a log file that contains all the locator resource records and
places the logfile in the following location:
B. Analyzes the state of domain controllers in a forest or enterprise and reports any
problems to help introubleshooting.
C. dns backup file
D. used to display current resolver cache content You can verify SRV locator resource
records by viewing netlogon.dns, located in the %systemroot%\System32\Config folder.
The SRV record is a Domain Name System (DNS) resource record that is used to identify
computers that host specific services.
SRV resource records are used to locate domain controllers for Active Directory.
You can use Notepad, to view this file.
The first record in the file is the domain controller’s Lightweight Directory Access Protocol
(LDAP) SRV record.
This record should appear similar to the following: _ldap._tcp.Domain_Name
Q10. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server. You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?
A. Create a primary zone named “.”.
B. Configure the Security settings of the contoso.com zone.
C. Create a zone delegation for GlobalNames.contoso.com.
D. Create a stub zone named “root”.
Answer: A
Explanation:
When you install DNS on a Windows server that does not have a connection to the Internet, the zone for the domain is created and a root zone, also known as a dot zone, is also created. This root zone may prevent access to the Internet for DNS and for clients of the DNS. If there is a root zone, there are no other zones other than those that are listed with DNS, and you cannot configure forwarders or root hint servers. Root domain This is the top of the tree, representing an unnamed level; it is sometimes shown as two empty quotation marks (“”), indicating a null value. When used in a DNS domain name, it is stated by a trailing period (.) to designate that the name is located at the root or highest level of the domain hierarchy. In this instance, the DNS domain name is considered to be complete and points to an exact location in the tree of names. Names stated this way are called fully qualified domain names (FQDNs). DNS Domain Name Hierarchy:
Q11. - (Topic 1)
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2.All of the computer accounts for the member servers are in an organizational unit (OU) named ServersAccounts.
Servers are restarted only occasionally.
You need to identify which servers were restarted during the last two days.
What should you do?
A. Run dsquery computer and specify the –staiepwd parameter.
B. Run Get-ADComputer and specify the SearchScope parameter.
C. Run Get-ADComputer and specify the IastLogon property.
D. Run dsquery server and specify the –o parameter
Answer: C
Q12. - (Topic 2)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2
Datacenter.Server1 is located in an isolated network that cannot access the Internet.
On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012
R2 Essentials and connects to a private virtual network.
After 30 days, you discover that VM1 shuts down every 60 minutes.
You need to resolve the issue that causes VM1 to shut down every 60 minutes.
What should you do?
A. OnVM1, run slmgr.exe and specify the /ipk parameter.
B. OnServer1, run slmgr.exe and specify the /rearm-sku parameter.
C. Create a new internal virtual network and attach VM1 to the new virtual network.
D. On Server1, run Add-WindowsFeatureVolumeActivation.
Answer: A
Q13. - (Topic 3)
You have a file server named Server1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can use Windows Server Backup to create a complete backup of Server1.
What should you configure?
A. The local groups by using Computer Management
B. The Role Assignment by using Authorization Manager
C. A task by using Authorization Manager
D. The User Rights Assignment by using the Local Group Policy Editor
Answer: A
Q14. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2. One of the domain controllers is named DC1.
The network contains a member server named Server1 that runs Windows Server 2012 R2.
You need to promote Server1 to a domain controller by using install from media (IFM).
What should you do first?
A. Create a system state backup of DC1.
B. Create IFM media on DC1.
C. Upgrade DC1 to Windows Server 2012 R2.
D. Run the Active Directory Domain Services Configuration Wizard on Server1.
E. Run the Active Directory Domain Services Installation Wizard on DC1.
Answer: C
Explanation:
A. Backs up system state data to be restored
C. Only valid option. You could install ADDS role on Server 1 and run ADDS configuration wizard and add DC to existing domain
D. Need to add ADDS role first
E. Wrong server Installation from media does not work across different operating system versions. In other words, you must use a Windows Server 2012 R2 domain controller to generate installation media to use for another Windows Server 2012 R2 domain controller installation. We can use the Install from media (IFM) option to install an Additional Domain Controller in an existing domain is the best option such as a branch office scenario where network is slow, unreliable and costly. IFM will minimize replication traffic during the installation because it uses restored backup files to populate the AD DS database. This will significantly reduce the amount of traffic copied over the WAN link. Things to remember: If you are deploying your first Domain Controller in the domain, you cannot use IFM. The OS will need to match the IFM media. (If you create a 2008 R2 IFM, promote a 2008 R2 DC) If you are creating a DC that will be a Global Catalog Server, create your IFM on a Global Catalog Server.
If you are creating a DC that will be a DNS Server, create your IFM on a DNS Server. If you want to copy the SYSVOL, the DC on which you generate the installation media and the new DC must be at least running Windows Server 2008 with Service Pack 2 or Windows Server 2008 R2. Membership of the Domain Admins group is the minimum required to complete IFM.
Q15. - (Topic 2)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to ensure that User1 can manage the group membership of Group1. The solution must minimize the number of permissions assigned to User1.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: G
Explanation:
The Set-ADGroup cmdlet modifies the properties of an Active Directory group. You can modify commonly used property values by using the cmdlet parameters. For example, the –ManagedBy parameter allows you to specify a user or group of users who can manage the specified AD group.