Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 1)
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter.
Host1 contains two virtual machines named VM1 and VM2.
You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.
Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On VM1, configure a Fibre Channel adapter.
B. On Host1, configure a new virtual switch.
C. On VM1, add a network adapter.
D. On Host1, configure a new Virtual Fibre Channel SAN.
E. On Host1, modify the Hyper-V settings.
Answer: A,D
Explanation:
Step 1:
D. Building a Virtual SAN The process of setting up virtual Fibre Channel starts with building a virtual SAN. The easiest way to accomplish this is to open the Hyper-V Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the Virtual SAN Manager command from the shortcut menu. Step 2:
A. Once you have created a virtual SAN, the next step in the process is to link a virtual machine to the virtual SAN. To do so, right click on the virtual machine for which you want to provide Fibre Channel connectivity and select the Settings command from the resulting shortcut menu. Next, select the Add Hardware container, as shown in the figure above, and then select the Fibre Channel Adapter option from the list of available hardware. Etc. Note:
* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest operating systems with direct access to a Fibre Channel SAN by using a standard World Wide Name (WWN) associated with a virtual machine.
Q2. - (Topic 3)
You have a Hyper-V host named server1 that runs windows server 2012 R2.server1 host 50 virtual machines that run windows server 2012 R2
You enable and configure enhanced session mode on Server1.
You need to identify a new functionality available for the virtual machines hosted on server1.
What should you identify?
A. Smart card authentication using virtual machine connections
B. Redirection of RemoteFX USB drivers by using remote desktop connections
C. Redirection of RemoteFX USB drivers using virtual machine connections
D. smart card authentication using the remote desktop client.
Answer: B
Q3. DRAG DROP - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed.
On Server1, you create a share named Documents. The Share permission for the Documents share is configured as shown in the following table.
The NTFS permission for the Documents share is configured as shown in the following table.
You need to configure the Share and NTFS permissions for the Documents share.
The permissions must meet the following requirements:
. Ensure that the members of a group named Group1 can read files and run programs in Documents. . Ensure that the members of Group1 can modify the permissions on only their own
files in Documents. . Ensure that the members of Group1 can create folders and files in Documents. . Minimize the number of permissions assigned to users and groups.
How should you configure the permissions?
To answer, drag the appropriate permission to the correct location. Each permission may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q4. DRAG DROP - (Topic 1)
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table.
You need to identify which network ID you should use for each subnet.
What should you identify?
To answer, drag the appropriate network ID to the each subnet in the answer area.
Answer:
Q5. - (Topic 3)
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You take a snapshot of VM1, and then you install an application on VM1.
You verify that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file. The solution must minimize the amount of downtime on VM1.
What should you do?
A. From Hyper-V Manager, delete the snapshot.
B. From a command prompt, run dism.exe and specify the /commit-image parameter.
C. From a command prompt, run dism.exe and specify the /delete-image parameter.
D. From Hyper-V Manager, inspect the virtual hard disk.
Answer: A
Explanation:
Virtual machine snapshots are file-based snapshots of the state, disk data, and configuration of a virtualmachine at a specific point in time. You can take multiple snapshots of a virtual machine, even while it is running. You can then revert the virtual machine to any of the previous states by App1ying a snapshot to the virtualmachine. Taking a snapshot of a VM is to in essence freeze the current state and make it a parent disk based on currentstate, and at the same time create a child disk to capture all subsequent changes. – See more at: Snapshots require adequate storage space. Snapshots are stored as .avhd files in the same location at thevirtual hard disk. Taking multiple snapshots can quickly consume a large amount of storage space. When you use Hyper-V Manager to delete a snapshot, the snapshot is removed from the snapshot treebut the .avhd file is not deleted until you turn off the virtual machine.
Q6. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2. One of the domain controllers is named DC1.
The network contains a member server named Server1 that runs Windows Server 2012 R2.
You need to promote Server1 to a domain controller by using install from media (IFM).
What should you do first?
A. Create a system state backup of DC1.
B. Create IFM media on DC1.
C. Upgrade DC1 to Windows Server 2012 R2.
D. Run the Active Directory Domain Services Configuration Wizard on Server1.
E. Run the Active Directory Domain Services Installation Wizard on DC1.
Answer: C
Explanation:
A. Backs up system state data to be restored
C. Only valid option. You could install ADDS role on Server 1 and run ADDS configuration wizard and add DC to existing domain
D. Need to add ADDS role first
E. Wrong server Installation from media does not work across different operating system versions. In other words, you must use a Windows Server 2012 R2 domain controller to generate installation media to use for another Windows Server 2012 R2 domain controller installation. We can use the Install from media (IFM) option to install an Additional Domain Controller in an existing domain is the best option such as a branch office scenario where network is slow, unreliable and costly. IFM will minimize replication traffic during the installation because it uses restored backup files to populate the AD DS database. This will significantly reduce the amount of traffic copied over the WAN link. Things to remember: If you are deploying your first Domain Controller in the domain, you cannot use IFM. The OS will need to match the IFM media. (If you create a 2008 R2 IFM, promote a 2008 R2 DC) If you are creating a DC that will be a Global Catalog Server, create your IFM on a Global Catalog Server.
If you are creating a DC that will be a DNS Server, create your IFM on a DNS Server. If you want to copy the SYSVOL, the DC on which you generate the installation media and the new DC must be at least running Windows Server 2008 with Service Pack 2 or Windows Server 2008 R2. Membership of the Domain Admins group is the minimum required to complete IFM.
Q7. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
A user named User1 attempts to log on to DC1, but receives the error message shown in the exhibit. (Click the Exhibit button.)
You need to ensure that User1 can log on to DC1. What should you do?
A. Add User1 to the Remote Management Users group.
B. Grant User1 the Allow log on locally user right.
C. Modify the Logon Workstations setting of the User1 account.
D. Modify the Account is sensitive and cannot be delegated setting of the User1 account.
Answer: B
Explanation:
Domain controllers, by default, restrict the types of user accounts that have the ability to log on locally.
References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and Manage Group Policy, Objective 6.2: Configure Security Policies, p. 321 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 2: Configure server roles and features, Objective 2.3: Configure servers for remote management, p. 114
http://technet.microsoft.com/en-us/library/ee957044(v=ws.10).aspx
Q8. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1.Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From Services Console configure the recovery settings
B. From a command prompt, run sc.exe and specify the config parameter
C. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter
D. From a command prompt, run sc.exe and specify the sdset parameter
Answer: B
Explanation:
Sc config, Modifies the value of a service’s entries in the registry and in the Service Control
Manager database.
obj= {<AccountName> | <ObjectName>}
Specifies a name of an account in which a service will run, or specifies a name of the
Windows driver object in
which the driver will run. The default setting is LocalSystem.
password= <Password>
Specifies a password. This is required if an account other than the LocalSystem account is
used.
Q9. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to create a storage pool that will contain a new volume.
You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.
What is the minimum number of 256-GB disks required for the storage pool?
A. 2
B. 3
C. 4
D. 5
Answer: C
Explanation:
It takes 3 discs (minimum) in order to create a storage pool array with parity. If this array were using fixed provisioning, this would not be enough given the 256MB capacity (since only 2/3rds of 256 X 3 - less than 600 - could be used as actual data with the rest being parity bits), but since this array uses thin provisioning, a 600GB volume could technically be set up on a 20GB disc and it would still show as 600GB. (So, essentially, the question really becomes how many drives it takes in a storage pool to create a parity array.)
References:
http://technet.microsoft.com/en-us/library/hh831391.aspx http://www.ibeast.com/content/tools/RaidCalc/RaidCalc.asp
http://www.raid-calculator.com/default.aspx https://www.icc-usa.com/raid-calculator