Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 3)
You have a print server named Server1.
You install a printer on Server1. You share the printer as Printer1.
You need to configure Printer1 to be available only from 19:00 to 05:00 every day.
Which settings from the properties of Printer1 should you modify?
A. Sharing
B. Security
C. Advanced
D. Device Settings
E. Ports
Answer: C
Explanation:
When navigating to the printer properties, the Properties tab is divided into several different tabs of which the Advanced tab will give you access to the scheduling where you can configure the availability of the printer.
: http://technet.microsoft.com/en-us/library/cc722526.aspx
Q2. - (Topic 1)
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable.
Which IPv6 address should you assign to Server1?
A. fe80:ab32:145c::32cc:401b
B. ff00:3fff:65df:145c:dca8::82a4
C. 2001:ab32:145c::32cc:401b
D. fd00:ab32:14:ad88:ac:58:abc2:4
Answer: D
Explanation:
Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255–can be used on an IPv4 network. Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows: The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.
Q3. DRAG DROP - (Topic 3)
Your network contains two Active Directory forests named adatum.com and contoso.com. Both forests contain multiple domains. A two-way trust exists between the forests.
The contoso.com domain contains a domain local security group named Group1. Group1 contains Contoso\user1 and adatum\user1.
You need to ensure that Group1 can only contain users from the contoso.com domain.
Which three actions should you perform?
To answer, move three actions from the list of actions to the answer area and arrange them
in the correct order.
Answer:
Q4. - (Topic 3)
You have a domain controller named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 hosts a DNS zone named contoso.com and a GlobalNames zone.
You discover that the root hints were removed from Server1.
You need to view the default root hints of Server1.
Which file should you open?
A. Netlogon.dns
B. Cache.dns
C. Globalnames.dns
D. Place.dns
Answer: B
Explanation:
DNS Server service implements root hints using a file, Cache.dns, stored in the systemroot\System32\Dns folder on the server. Thus viewing the Cache.dns file will show the root hints.
Q5. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing the Virtual Fibre Channel SAN feature.
Which of the following is TRUE with regards to the Virtual Fibre Channel SAN feature? (Choose all that apply.)
A. It prevents virtual machines from connecting directly to Fibre Channel storage.
B. It allows for virtual machines to connect to Fibre Channel storage directly.
C. It includes support for virtual SANs, live migration, and multipath I/O.
D. It includes support for virtual SANs, and live migration, but not multipath I/O.
Answer: B,C
Explanation:
To gain the full benefits of server virtualization and cloud architectures, virtualized workloads need to connect easily and reliably to existing SANs. For many enterprise organizations, Hyper-V deployments were limited in scale and scope because they lacked the ability to directly connect VMs to Fibre Channel SAN storage from inside a VM. Hyper-V in Windows Server 2012 R2 now provides virtual Fibre Channel Host Bus Adapter (HBA) ports within the guest operating system that runs the virtual machine, connecting virtual machines directly to FibreChannel SAN Logical Unit Numbers (LUNs). Virtual Fibre Channel for Hyper-V provides several important advantages for Hyper-V environments: Simplifies storage connectivity for virtualized workloads to ultra-reliable, high-performance Fibre Channel SAN storage. Enables new solutions that require shared storage, such as failover clustering, live migration, andmultipath I/O. Leverages and protects existing investments in Fibre Channel storage? Enables advanced FC SAN storage functionality for VMs. Facilitates migration of FC workloads into the cloud. Enables improved monitoring and troubleshooting, with visibility from the VM to the FC SAN storage. Enables centralized management of Ethernet and FC-based virtualized workloads. Combining Virtual Fibre Channel for Hyper-V and the Brocade Fibre Channel SAN infrastructure greatly simplifies connectivity between Fibre Channel SAN storage and virtualized applications, enabling enterprise IT and hosting providers to achieve new levels of availability, reliability, and scalability for cloud-based services. You need your virtualized workloads to connect easily and reliably to your existing storage arrays. Windows Server 2012 R2 provides Fibre Channel ports within the guest operating system, which allows you to connect to Fibre Channel directly from within virtual machines. This feature protects your investments in Fibre Channel, enables you to virtualize workloads that use direct access to Fibre Channel storage, allows you to cluster guest operating systems over Fibre Channel, and provides an important new storage option for servers hosted in your virtualization infrastructure. With this Hyper-V virtual Fibre Channel feature, you can connect to Fibre Channel storage from within a virtual machine. This allows you to use your existing Fibre Channel investments to support virtualized workloads. Support for Fibre Channel in Hyper-V guests also includes support for many related features, such as virtual SANs, live migration, and MPIO.
Q6. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk. Which tool should you use?
A. diskpart.exe
B. vdsldr.exe
C. fsutil.exe
D. vds.exe
Answer: A
Q7. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.All domain controllers are configured as DNS servers.
On Server1, you open Server Manager and you add DC2 as another server to manage.
From Server Manager on Server1, you right-click DC2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click DC2, you see the option to run DNS Manager.
What should you do?
A. On Server1, install the Role Administration Tools.
B. In the domain, add Server1 to the DNS Admins group.
C. On DC2 and Server1, run winrmquickconfig.
D. On DC2, install the Feature Administration Tools.
Answer: A
Explanation:
The Domain Name System (DNS) role is a role that provides a standard method for associating names with numeric Internet addresses. This lets users refer to network computers by using easy-to-remember names instead of a long series of numbers. Windows DNS services can be integrated with DHCP services, eliminating the need to add DNS records as computers are added to the network.
Q8. - (Topic 3)
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company’s desktop applications. A network technician shares Folder1 as Share 1.
You need to ensure that the share for Folder1 is not visible when users browse the network.
What should you do?
A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C. From the properties of Folder1, configure the hidden attribute.
D. From the properties of Share1, configure access-based enumeration
Answer: B
Q9. - (Topic 3)
A company’s server deployment team needs to introduce many new Windows Server 2012 R2 domain controllers throughout the network into a single Windows Server 2008 R2 domain. The team has chosen to use Windows PowerShell.
Which Windows PowerShell module includes the command-line options for installing domain controllers?
A. AD DS Administration cmdlets
B. AD DS Deployment cmdlets
C. AD CS Deployment cmdlets
D. AD CS Administration cmdlets
Answer: B
Explanation:
First use the Import-Module ADDSDeployment command in PowerShell–it includes the cmdlets needed to add new domain controllers. Then run Install-ADDSDomainController along with the required arguments. Quick Tip: DCPromo.exe has been deprecated but can still be used along with an answer file, and ADPrep.exe runs automatically when needed (but can be run with elevated rights for more control).
Q10. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager.
What should you do?
A. From Server Manager, click Configure Performance Alerts.
B. From Performance Monitor, create a Data Collector Set (DCS).
C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
D. From Server Manager, click Start Performance Counters.
Answer: D
Explanation:
You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored.
: http://technet.microsoft.com/en-us/library/bb734903.aspx
Q11. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains an organizational unit (OU) named OU1.
You need to ensure that when new client computers join the domain, their computer accounts are created in OU1 by default.
What should you do?
A. From Windows PowerShell, run the Move-ADObjectcmdlet.
B. From a command prompt, run the redircmp.exe command.
C. From ADSI Edit, configure the properties of the OU1 object.
D. From Ldp, configure the properties of the Computers container.
Answer: B
Explanation:
Redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in CN=Computers. The CN=Computers container is a computer-protected object. For backward compatibility reasons, you cannot (and must not) remove it.
: http://technet.microsoft.com/en-us/library/cc770619.aspx
Q12. - (Topic 3)
Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 is connected to LAN1.
You run the route print command as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that Server1 can communicate with the client computers on LAN2.
What should you do?
A. Change the default gateway address.
B. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
C. Change the metric of the 10.10.1.0 route.
D. Set the state of the Teredo interface to disable.
Answer: A
Explanation:
The exhibit shows the default gateway address to be that of LAN1. This should be changed to the LAN2 gateway address to allow client computers access on LAN2.
In general, the first and last addresses in a subnet are used as the network identifier and broadcast address, respectively. All other addresses in the subnet can be assigned to hosts on that subnet. For example, IP addresses of networks with subnet masks of at least 24 bits ending in .0 or .255 can never be assigned to hosts. Such “last” addresses of a subnet are considered “broadcast” addresses and all hosts on the corresponding subnet will respond to it. Theoretically, there could be situations where you can assign an address ending in .0: for example, if you have a subnet like 192.168.0.0/255.255.0.0, you are allowed to assign a host the address 192.168.1.0. It could create confusion though, so it’s not a very common practice. Example10.6.43.0 with subnet 255.255.252.0 (22 bit subnet mask) means subnet ID 10.6.40.0, a host address range from 10.6.40.1 to 10.6.43.254 and a broadcast address10.6.43.255. So in theory, your example 10.6.43.0 would be allowed as a valid host address. The default gateway address should not end in .0 with the /24 address.
References: Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 4: Deploying domain controllers, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 254-256
Q13. DRAG DROP - (Topic 1)
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table.
You need to identify which network ID you should use for each subnet.
What should you identify?
To answer, drag the appropriate network ID to the each subnet in the answer area.
Answer:
Q14. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. An organizational unit (OU) named OU1 contains user accounts and computer accounts. A Group Policy object (GPO) named GP1 is linked to the domain. GP1 contains Computer Configuration settings and User Configuration settings.
You need to prevent the User Configuration settings in GP1 from being applied to users. The solution must ensure that the Computer Configuration settings in GP1 are applied to all client computers.
What should you configure?
A. the Group Policy loopback processing mode
B. the Block Inheritance feature
C. the Enforced setting
D. the GPO Status
Answer: D
Explanation:
Q15. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. Run the Delegation of Control Wizard on the Policies containers
B. Run the Set-GPPermission cmdlet
C. Run the Delegation of Control Wizard on OU1
D. Modify the permission on the user1 account
Answer: C
Explanation:
A. Not minimum permissions
B. Grants a level of permissions to a security principal for one GPO or all the GPOs in a domain
C. Minimizes delegated permission to a single OU
D. Will not allow GPO changes to the OU Delegation of Control Wizard The following are common tasks that you can select to delegate control of them: Create, delete, and manage user accounts Reset user passwords and force password change at next logon Read all user information Modify the membership of a group Join a computer to a domain Manage Group Policy links Generate Resultant Set of Policy (Planning) Generate Resultant Set of Policy (Logging) Create, delete, and manage inetOrgPerson accounts Reset inetOrgPerson passwords and force password change at next logon Read all inetOrgPerson information