Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 is a DHCP server that is configured to have a scope named Scope1. Server2 is configured to obtain an IP address automatically.
In Scope1, you create a reservation named Res_Server2 for Server2.
A technician replaces the network adapter on Server2.
You need to ensure that Server2 can obtain the same IP address.
What should you modify on Server1?
A. The Name Protection settings of Scope1
B. The MAC address of Res_Server2
C. The Advanced settings of Res_Server2
D. The Network Access Protection Settings of Scope1
Answer: B
Explanation:
DHCP reservations are given based upon MAC address (at least on IPv4/DHCPv4). For clients that require a constant IP address, you can either manually configure a static IP address, or assign a reservation on the DHCP server. Reservations are permanent lease assignments that are used to ensure that a specified client on a subnet can always use the same IP address. You can use DHCP reservations for hosts that require a consistent IP address, but do not need to be statically configured. DHCP reservations provide a mechanism by which IP addresses may be permanently assigned to a specific client based on the MAC address of that client. The MAC address of a Windows client can be found running the ipconfig /all command. For Linux systems the corresponding command is ifconfig -a. Once the MAC address has been identified, the reservation may be configured using either the DHCP console or at the command prompt using the netsh tool.
Media access control (MAC) address authorization functions in the same way as automatic number identification (ANI) authorization, but it is used for wireless clients and clients connecting to your network by using an 802.1X authenticating switch. Since the network adapter was replaced, you need to modify the MAC address on Server1 to ensure that Server2 can obtain the same IP address.
Reference: http://technet.microsoft.com/en-us/library/dd197535%28v=WS.10%29.aspx
Q2. HOTSPOT - (Topic 3)
You have a server named Server1. Server1 runs Windows Server 2012 R2.
A user named Admin1 is a member of the local Administrators group.
You need to ensure that Admin1 receives a User Account Control (UAC) prompt when
attempting to open Windows PowerShell as an administrator.
Which setting should you modify from the Local Group Policy Editor?
To answer, select the appropriate setting in the answer area.
Answer:
Q3. - (Topic 2)
You have a server named Server2 that runs Windows Server 2012 R2.
A network technician installs a new disk on Server2 and creates a new volume.
The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can enable NTFS disk quotas for volume D.
What should you do first?
A. Format volume D
B. Install the File Server Resource Manager role service
C. Run the convert.exe command
D. Convert the disk to a dynamic disk
Answer: A
Explanation:
To be able to use a NEW disk so that you can enable NTFS disk quotas, in other word REFS to NTFS, it requires formatting first.
Q4. HOTSPOT - (Topic 3)
You have a Group Policy object (GPO) named Server Audit Policy. The settings of the GPO are shown in the Settings exhibit. (Click the Exhibit button.)
The scope of the GPO is shown in the Scope exhibit. (Click the Exhibit button.)
The domain contains a group named Group1. The membership of Group1 is shown in the Group1 exhibit. (Click the Exhibit button.)
Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.
Answer:
Q5. - (Topic 3)
You have a network printer connected to print server. You need to be able to print if print server goes down.
What should you configure?
A. branch office direct printing
B. printer pooling
C. spooling
D. Print forwarding
Answer: A
Explanation:
Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. It is enabled by an administrator using the Print Management Console or Windows PowerShell on the server.
The printer information is cached in the branch office, so that if the print server is unavailable for some reason (for example if the WAN link to the data center is down), then it is still possible for the user to print. Branch Office Direct Printing requires the following operating systems: Windows Server 2012 Windows 8
Q6. - (Topic 3)
You have a virtual machine named VM1.
You install Windows Server 2012 R2 on VM1.
You plan to use VM1 as an image that will be distributed to sales users to demonstrate the features of a custom application. The custom application only requires the Web Server (IIS) server role to be installed.
You need to ensure that the VHD file for VM1 only contains the required Windows Server 2012 R2 source files.
Which tool should you use?
A. servermanagercmd.exe
B. dism.exe
C. ocsetup.exe
D. imagex.exe
Answer: B
Explanation:
You can use DISM to:
Add, remove, and enumerate packages and drivers.
Enable or disable Windows features.
Apply changes based on the offline servicing section of an unattend.xml answer file.
Configure international settings.
Upgrade a Windows image to a different edition.
Prepare a Windows PE image.
Take advantage of better logging.
Service down-level operating systems like Windows Vista with SP1 and Windows Server
2008.
Service all platforms (32-bit, 64-bit, and Itanium).
Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.
Make use of old Package Manager scripts.
This command will mount the image before making any changes. This will ensure that only
the required Windows Server 2012 R2 source files are contained.
Q7. HOTSPOT - (Topic 1)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 40 virtual machines that run Windows Server 2008 R2. The virtual machines connect to a private virtual switch.
You have a file that you want to copy to all of the virtual machines.
You need to identify to which servers you can copy files by using the Copy-VmFile cmdlet.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
Q8. HOTSPOT - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The network contains two subnets. The subnets are configured as shown in the following table.
The network contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role installed. Server1 is configured to lease IP addresses to the two subnets.
You add three new printers to the MainOffice subnet. The printers have static IP addresses. The IP addresses are consecutive.
You need to create an exclusion range that contains the IP addresses of the printers.
From which node should you configure the exclusion range? To answer, select the appropriate node in the answer area.
Answer:
Q9. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012 R2.All client computers run Windows 7. The computer accounts for all of the client computers are located in an organizational unit (OU) named OU1.
An administrator links a Group Policy object (GPO) to OU1. The GPO contains several application control policies.
You discover that the application control policies are not enforced on the client computers.
You need to modify the GPO to ensure that the application control policies are enforced on the client computers.
What should you configure in the GPO?
To answer, select the appropriate service in the answer area.
Answer:
Q10. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed.
You have been instructed to modify an Active Directory computer object.
Which of the following actions should you take?
A. You should consider making use of the Get-ADComputer Windows PowerShell cmdlet.
B. You should consider making use of the Set-ADComputer Windows PowerShell cmdlet
C. You should consider making use of the New-ADComputer Windows PowerShell cmdlet
D. You should consider making use of the Get-ADComputerServiceAccount Windows PowerShell cmdlet
Answer: B
Explanation:
Set-ADComputer – Modifies an Active Directory computer object.
Q11. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. Run the Delegation of Control Wizard on OU1.
B. Add User1 to the Group Policy Creator Owners group.
C. Modify the permission on the \\Contoso.com\SYSVOL\Contoso.com\Policies folder.
D. Modify the permissions on the User1 account.
Answer: A
Explanation:
The Delegation of Control Wizard allows you to delegate tasks, active Directory Object types and to set permissions.
Q12. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
An iSCSI SAN is available on the network.
Server1 hosts four virtual machines named VM1, VM2, VM3, VM4.
You create a LUN on the SAN.
You need to provide VM1 with access to the LUN. The solution must prevent other virtual machines from accessing the LUN.
What should you configure?
A. A fixed-size VHDX
B. A dynamically expanding VHDX
C. A fixed-size VHD
D. A pass-through disk
E. A dynamically expanding VHD
Answer: D
Explanation:
You can use physical disks that are directly attached to a virtual machine as a storage option on the management operating system. This allows virtual machines to access storage that is mapped directly to the server running Hyper-V without first configuring the volume. The storage can be either a physical disk which is internal to the server, or a SAN logical unit number (LUN) that is mapped to the server (a LUN is a logical reference to a portion of a storage subsystem). The virtual machine must have exclusive access to the storage, so the storage must be set in an Offline state in Disk Management. The storage is not limited in size, so it can be a multi-terabyte LUN. When using physical disks that are directly attached to a virtual machine, you should be aware of the following: This type of disk cannot be dynamically expanded. You cannot use differencing disks with them. You cannot take virtual hard disk snapshots. Att: If you are installing an operating system on the physical disk and it is in an Online state before the virtual machine is started, the virtual machine will fail to start. You must store the virtual machine configuration file in an alternate location because the physical disk is used by the operating system installation. For example, locate the configuration file on another internal drive on the server running Hyper-V.
Q13. HOTSPOT - (Topic 2)
Your company has a main office and a sales office. The main office has 2,000 users. The sales office has 20 users. All client computers in the sales office run Windows 8.
The sales office contains a print server named App1 that runs Windows Server 2012 R2. App1 has a shared printer named Printer1. Printer1 connects to a network-attached print device.
You plan to connect all of the users in the sales office to Printer1 on App1.
You need to ensure that if App1 fails, the users can continue to print to Printer1.
What should you configure on App1? To answer, select the appropriate option in the answer area.
Answer:
Q14. - (Topic 3)
Your network contains one Active Directory domain named contoso.com. The domain contains
2,000 client computers used by students. You recently discover an increase in calls to the helpdesk that relate to security policy to meet the following requirement:
. Modify the UserName of the built-in account named Administrator . Support a time mismatch between client computers and domain controllers of up to three minutes.
Which Two security settings should you modify?
A. Account Policies
B. Password Policy
C. Account Lockout Policy
D. Kerberos Policy
E. Local Policies
F. Audit Policy
G. User Rights Assignment
H. Security Options
Answer: D,H
Explanation:
In Group Policy Object Editor, click Computer Configuration, click Windows Settings, click Security Settings, click Local Policies, and then click Security Options. In the details pane, double-click Accounts: Rename administrator account.
Q15. - (Topic 3)
You have two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. The servers are configured as shown in the following table.
The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit button.)
From Server1, you attempt to ping Server2, but you receive an error message as shown in the Error exhibit. (Click the Exhibit button.)
You need to ensure that you can successfully ping Server2 from Server1. What should you do on Server1?
A. Disable Windows Firewall.
B. Modify the subnet mask.
C. Modify the DNS settings.
D. Modify the default gateway settings.
Answer: D
Explanation:
Route is used to view and modify the IP routing table. Route Print displays a list of current routes that the host knows. Default gateways are important to make IP routing work efficiently. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger inter network. In order for Host A on Network 1 to communicate with Host B on Network 2, Host A first checks its routing table to see if a specific route to Host B exists. If there is no specific route to Host B, Host A forwards its TCP/IP traffic for Host B to its own default gateway, IP Router 1.
The Default Gateway specifies the IP address of a router on the local subnet, which the system will use to access destinations on other networks. If the default gateway settings are not properly configured, then there can be no successful connection.
Reference:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269