Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):
You need to use DSC to configure Server1 as defined in the configuration.
What should you run first?
A. Service1
B. Configuration1
C. Start DscConfiguration
D. Test-DscConfigu ration
Answer: B
Q2. - (Topic 3)
You have a server named Server1 that runs a full installation of Windows Server 2012 R2.
You need to uninstall the graphical user interface (GUI) on Server1. You must achieve this goal by using the minimum amount of Administrative effort. What should you do?
A. Reinstall Windows Server 2012 R2 on the server.
B. From Server Manager, uninstall the User Interfaces and Infrastructure feature.
C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE
D. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
Answer: B
Q3. - (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O visualization
Answer: I
Explanation:
Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable the time synchronization using Integration Services.
References: http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual-machines.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144
Q4. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations:
Connection type: External network
Single-root I/O virtualization (SR-IOV): Enabled
Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.
What should you do?
A. Remove Switch1 and recreate Switch1 as an internal network.
B. Change the Connection type of Switch1 to Private network.
C. Change the Connection type of Switch1 to Internal network.
D. Remove Switch1 and recreate Switch1 as a private network.
Answer: D
Explanation:
You cannot change the type of vswitch from external to private when SR-IOV is enabled at vswitch creation ->you need to recreate the vswitch.
Q5. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named contoso.com. All domain
controllers run Windows Server 2012 R2.
All servers are configured to enforce AppLocker policies.
You install a server named Server1.
On Server1, you install an application named App1.exe in a folder located on C:\App1.
You have two domain groups named Group1 and Group2.A user named User1 is a
member of Group1 and Group2.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to contoso.com.
You create the executable rules as shown in the exhibit by using the Create Executable Rules wizard. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Q6. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-SR07. You want to achieve this remotely from a server, named ENSUREPASS-SR06.
Which of the following actions should you take?
A. You should consider accessing the Server Manager console on ENSUREPASS-SR07.
B. You should consider accessing the Server Manager console on ENSUREPASS-SR06.
C. You should consider accessing the TS Manager console on ENSUREPASS-SR07
D. You should consider accessing the TS Manager console on ENSUREPASS-SR06.
Answer: B
Q7. HOTSPOT - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 does not
have Internet connectivity.
All roles are removed completely from Server1.
You mount a Windows Server 2012 R2 installation image to the C:\Source folder.
You need to install the DNS Server server role on Server1.
Which folder should you use as the source? To answer, select the appropriate folder in the
answer area.
Answer:
Q8. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.
A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can enable NTFS disk quotas for volume D.
What should you do first?
A. Install the File Server Resource Manager role service.
B. Format volume D.
C. Run the convert.exe command.
D. Convert the disk to a dynamic disk.
Answer: B
Explanation:
ReFS-formatted disks cannot use NTFS disk quotas, so the drive must be formatted as an NTFS partition
Q9. - (Topic 1)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup.
On Server1 and Server2, you create a local user account named Admin1.You add the account to the local Administrators group. On both servers, Admin1 has the same password.
You log on to Server1 as Admin1. You open Computer Management and you.connect to Server2.
When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access Denied messages.
You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management.
What should you configure on Server2?
A. From Server Manager, modify the Remote Management setting.
B. From Local Users and Groups, modify the membership of the Remote Management Users group.
C. From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule.
D. From Registry Editor, configure the LocalAccountTokenFilterPolicy registry value.
Answer: D
Explanation:
The LocalAccountTokenFilterPolicy setting affects how administrator credentials are applied to remotely administer the computer. : http://support.microsoft.com/kb/942817
Q10. - (Topic 3)
Your network contains an Active Directory forest named adatum.com. The forest contains a child domain named asia.adatum.com. The asia.adatum.com child domain contains a server named DHCP1 that runs Windows Server 2012 R2.
You install the DHCP Server server role on DHCP1.
You have access to the administrative accounts shown in the following table.
You need to authorize DHCP1.
Which user account should you use?
A. Admin1
B. Admin2
C. Admin3
D. Admin4
Answer: B
Q11. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 and has the Hyper-V server role installed. HVServer1 hosts 10 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled.
You install the DHCP server role on a virtual machine named Server 1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope.
You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1.
You need to ensure that the virtual machines can use Server1 as a DHCP server.
What should you do?
A. Enable MAC address spoofing on Server1.
B. Disable the DHCP guard on all of the virtual machines that are DHCP clients.
C. Disable the DHCP guard on Server1.
D. Enable single-root I/O virtualization (SR-IOV) on Server1.
Answer: C
Explanation:
Private virtual networks are used where you want to allow communications between virtual machine to virtual machine on the same physical server in a block diagram, a private network is an internal network without a virtual NIC in the parent partition. A private network would commonly be used where you need complete isolation of virtual machines from external and parent partition traffic. DMZ workloads running on a leg of a trihomed firewall, or an isolated test domain are examples where this type of network may be useful.
Q12. - (Topic 3)
Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01.
You need to ensure that when administrators create users in contoso.com, the default user principal name (UPN) suffix is litwareinc.com.
Which cmdlet should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: G
Explanation:
The following example demonstrates how to create a new UPN suffix for the
users in the Fabrikam.com forest:
Set-ADForest -UPNSuffixes @{Add="headquarters.fabrikam.com"}
Reference: Creating a UPN Suffix for a Forest
https://technet.microsoft.com/sv-se/library/Dd391925(v=WS.10).aspx
Q13. DRAG DROP - (Topic 3)
Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24.
The company plans to open two branch offices. The offices will be configured as shown in the following table.
You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer.
The solution must minimize the number of unused IP addresses.
Which network prefixes should you select?
To answer, drag the appropriate network prefix to the correct branch office in the answer area.
Answer:
Q14. HOTSPOT - (Topic 2)
You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.
Answer:
Q15. - (Topic 1)
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM “VM6 | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM “VM5 I Set-VMNetworkAdapter -IovWeight 0
C. Get-VM “VM5 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “VM6 | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM “VM6 | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM “VM5 | Set-VMNetworkAdapter -AllowTeaming On
Answer: C,E
Explanation:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination. . If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets. . If set to Destination, it receives copied packets from the source virtual network adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
Reference: http://technet.microsoft.com/en-us/library/hh848457.aspx