Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Simulation 70-410 bible are available on Google Drive, GET MORE: https://drive.google.com/open?id=1gKqa_vO9OeNyYEjdDpkvCkiJIJhS7seE
Q1. You have a print server named Server1.
You install a printer on Server1. You share the printer as Printer1.
You need to configure Printer1 to be available only from 19:00 to 05:00 every day. Which settings from the properties of Printer1 should you modify?
A. Sharing
B. Security
C. Advanced
D. Device Settings
E. Ports
Answer: C
Explanation:
When navigating to the printer properties, the Properties tab is divided into several different tabs of which the Advanced tab will give you access to the scheduling where you can configure the availability of the printer.
Reference: http://technet.microsoft.com/en-us/library/cc722526.aspx
Q2. You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2. Server1 is configured to obtain an IPv4 address by using DHCP. You need to configure the IPv4 settings of the network connection on Server1 as follows:
u2711 IP address: 10.1.1.1
u2711 Subnet mask: 255.255.240.0
u2711 Default gateway: 10.1.1.254
What should you run?
A. Set-NetlPInterface
B. netcfg.exe
C. New-NetlPAddress
D. msconfig.exe
Answer: C
Q3. Your network contains an Active Directory domain named contoso.com. The network contains a domain controller named DC1 that has the DNS Server server role installed. DC1 has a standard primary DNS zone for contoso.com.
You need to ensure that only client computers in the contoso.com domain will be able to add their records to the contoso.com zone.
What should you do first?
A. Sign the contoso.com zone.
B. Modify the Security settings of DC1.
C. Modify the Security settings of the contoso.com zone.
D. Store the contoso.com zone in Active Directory.
Answer: D
Explanation:
Only Authenticated users can create records when zone is stored in AD.
Secure dynamic updates allow an administrator to control what computers update what names and prevent unauthorized computers from overwriting existing names in DNS.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 6: Network Administration, Lesson 2: Implementing DNSSEC, p. 237 http://technet.microsoft.com/en-us/library/cc731204(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755193.aspx
Q4. Your network contains an Active Directory domain named contoso.com. All user accounts in the sales department reside in an organizational unit (OU) named OU1.
You have a Group Policy object (GPO) named GPO1. GPO1 is used to deploy a logon script to all of the users in the sales department.
You discover that the logon script does not run when the sales users log on to their computers. You open Group Policy Management as shown in the exhibit.
You need to ensure that the logon script in GPO1 is applied to the sales users. What should you do?
A. Enforce GPO1.
B. Modify the link order of GPO1.
C. Modify the Delegation settings of GPO1.
D. Enable the link of GPO1.
Answer: D
Q5. Your network contains two Active Directory forests named contoso.com and adatum.com. All servers run Windows Server 2012 R2. A one-way external trust exists between contoso.com and adatum.com.
Adatum.com contains a universal group named Group1. You need to prevent Group1 from being used to provide access to the resources in contoso.com.
What should you do?
A. Change the scope of Group1 to domain local.
B. Modify the Allowed to Authenticate permissions in adatum.com.
C. Enable SID quarantine on the trust between contoso.com and adatum.com.
D. Modify the Allowed to Authenticate permissions in contoso.com.
Answer: D
Explanation:
* Accounts that require access to the customer Active Directory will be granted a special right called Allowed to Authenticate. This right is then applied to computer objects (Active Directory domain controllers and AD RMS servers) within the customer Active Directory to which the account needs access.
* For users in a trusted Windows Server 2008 or Windows Server 2003 domain or forest to be able to access resources in a trusting Windows Server 2008 or Windows Server 2003 domain or forest where the trust authentication setting has been set to selective authentication, each user must be explicitly granted the Allowed to Authenticate permission on the security descriptor of the computer objects (resource computers) that reside in the trusting domain or forest.
Q6. A laptop with server 2012 R2 OS, you need to ensure that server 2012 R2 can use wireless network adapter.
What should you do first?
A. use server manager to install the Wireless Lan Service Role
B. use server manager to install the Wireless Network Role
C. use server manager to install the Wireless Lan Service Feature
D. use server manager to install the Wireless Network Feature
Answer: C
Q7. You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. The RemoteFX settings
B. The Enhanced Session Mode Policy
C. The NUMA Spanning settings
D. The Integration Services settings
Answer: B
Q8. You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-SR07. You want to achieve this remotely from a server, named ENSUREPASS-SR06.
Which of the following actions should you take?
A. You should consider accessing the Server Manager console on ENSUREPASS-SR07.
B. You should consider accessing the Server Manager console on ENSUREPASS-SR06.
C. You should consider accessing the TS Manager console on ENSUREPASS-SR07
D. You should consider accessing the TS Manager console on ENSUREPASS-SR06.
Answer: B
Q9. Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. All domain controllers run Windows Server 2012 R2 and are configured as global catalog servers. The corp.contoso.com domain contains a domain controller named DC1.
You need to disable the global catalog on DC1. What should you do?
A. From Active Directory Users and Computers, modify the properties of the DC1 computer account.
B. From Active Directory Administrative Center, modify the properties of the DC1 computer account.
C. From Active Directory Sites and Services, modify the NTDS Settings of the DC1 server object.
D. From Active Directory Domains and Trusts, modify the properties of the corp.contoso.com domain.
Answer: C
Explanation:
To add or remove the global catalog
Open Active Directory Sites and Services. To open Active Directory Sites and Services, click Start, click Administrative Tools, and then click Active Directory Sites and Services. To open Active Directory Sites and Services in Windows Serveru00ae 2012, click Start, type dssite.msc.
In the console tree, click the server object to which you want to add the global catalog or from which you want to remove the global catalog.
Where?
Active Directory Sites and Services\Sites\SiteName\Servers
In the details pane, right-click NTDS Settings of the selected server object, and then click Properties.
Select the Global Catalog check box to add the global catalog, or clear the check box to remove the global catalog.
Q10. You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2.
Server1 has the DHCP Server server role and the File Server server role installed.
You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface (GUI).
The solution must meet the following requirements:
u2711 Preserve the server roles and their configurations.
u2711 Minimize administrative effort.
What should you do?
A. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server with a GUI.
B. Start Server1 from the Windows Server 2012 R2 installation media and select Server Core Installation.
When the installation is complete, add the Server Graphical Shell feature.
C. Start Server1 from the Windows Server 2012 R2 installation media and select Server with a GUI.
D. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server Core Installation.
When the installation is complete, add the Server Graphical Shell feature
Answer: D
Explanation:
:A. Server is on 2008 R2 core, must install 2012 R2 core and then GUI
:B. Not least effort
:C. Not least effort
:D. Upgrade to 2012 R2 and install GUI shell
A. http://technet.microsoft.com/en-us/library/jj574204.aspx Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported.
However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes.
P.S. Easily pass 70-410 Exam with Examcollectionplus Simulation Dumps & pdf vce, Try Free: https://www.examcollectionplus.net/vce-70-410/ (505 New Questions)