Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Verified 70-410 faq are available on Google Drive, GET MORE: https://drive.google.com/open?id=1l5e34W-NoOIZWc2w8rOUEhrHQBLmfQEX
Q1. Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?
A. DHCP guard
B. MAC address
C. Router guard
D. Port mirroring
Answer: B
Explanation:
When MAC addresses are not assigned to virtual machines, it could cause network problems.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V hosts, p. 313-319. http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx
Q2. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share
u2013 Advanced option.
You need to ensure that you can use SMB Share u2013 Advanced to create the new share. What should you do on Server1 before you run the New Share Wizard?
A. Run the Set-SmbShare cmdlet.
B. Install the File Server Resource Manager role service.
C. Configure Dynamic Access Control and Apply a central access policy.
D. Configure the Advanced system settings.
Answer: B
Q3. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2. You need to create 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. File Server Resource Manager (FSRM)
B. New-StoragePool
C. Diskpart
D. Share and Storage Management
Answer: C
Explanation:
You can create a VHD from either the Disk Management snap-in or the command line (diskpart).
From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB).
DiskPart
Microsoft DiskPart version 6.1.7100
Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7
DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000
Q4. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters are connected to a network named LAN1. The two other network adapters are connected to a network named LAN2.
You need to create a network adapter team from the three network adapters connected to LAN1.
Which tool should you use?
A. Routing and Remote Access
B. Network and Sharing Center
C. Server Manager
D. Network Load Balancing Manager
Answer: C
Q5. Your network contains an Active Directory domain named contoso.com.
You have a Group Policy object (GPO) named GPO1 that contains several user settings. GPO1 is linked to an organizational unit (OU) named OU1.
The help desk reports that GPO1 applies to only some of the users in OU1.
You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.)
You need to configure GPO1 to apply to all of the users in OU1. What should you do?
A. Modify the Security settings of GPO1.
B. Disable Block Inheritance on OU1.
C. Modify the GPO status of GPO1.
D. Enforce GPO1.
Answer: A
Explanation:
Inheritance is blocked, but that would only affect policies applied ABOVE the given OU, not the one applied directly to it (as is the case with GPO1). Also Enforcing a policy is only going to cause it to be applied even when inheritance is blocked (which, as mentioned, does not make a difference on policies which are directly linked to the OU as a child). That means that there must be something in the security settings (such as a Security Group which does not have the u201creadu201d or u201cApply group policyu201d permission) preventing ALL of the users in OU1 from having the policy applied. (GPO status is the status of its replication within the forest, so it is not relevant here.)
Q6. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
The domain contains a server named Server1 that runs Windows Server 2012 R2. You need to ensure that when users log on to Server1, their user account is added
automatically to a local group named Group1 during the log on process.
Which Group Policy settings should you modify?
A. User Rights Assignment
B. Preferences
C. Security Options
D. Restricted Groups
Answer: B
Explanation:
With Preferences, local and domain accounts can be added to a local group without affecting the existing members of the group
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 8: File Services and Storage, p. 361.
http://technet.microsoft.com/en-us/library/cc785631(v=ws.10).aspx http://www.grouppolicy.biz/2010/01/how-to-use-group-policy-preferences-to-secure-local- administrator-groups/
http://technet.microsoft.com/en-us/library/cc780182(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831424.aspx
Q7. Your network contains an Active Directory forest that contains two domains. The forest contains five domain controllers. The domain controllers are configured as shown in the following table.
You need to configure DC5 as a global catalog server. Which tool should you use?
A. Active Directory Domains and Trusts
B. Active Directory Users and Computers
C. Active Directory Administrative Center
D. Active Directory Sites and Services
Answer: D
Explanation:
If you have more than one domain in your forest and you have a significant user population in a site, you can optimize the speed and efficiency of domain logons and directory searches by adding a global catalog server to the site. If you have a single-domain forest, global catalog servers are not required for logons, but directory searches are directed to the global catalog. In this case, you can enable the global catalog on all domain controllers for faster directory searches. You can use the same user interface (UI) in the Active Directory Sites and Services snap-in to add or remove the global catalog. Enabling the global catalog can cause additional replication traffic. However, global catalog removal occurs gradually in the background and does not affect replication or performance. Membership in the Enterprise Admins group in the forest or the Domain Admins group in the forest root domain, or equivalent, is the minimum required to complete this procedure. To add or remove the global catalog Open Active Directory Sites and Services.
To open Active Directory Sites and Services, click Start, click Administrative Tools, and then click Active Directory Sites and Services.
To open Active Directory Sites and Services in Windows Server 2012, click Start , type dssite.msc. In the console tree, click the server object to which you want to add the global catalog or from which you want to remove the global catalog.
Where?
Active Directory Sites and Services\Sites\SiteName\Servers In the details pane, right-click NTDS Settings of the selected server object, and then click Properties. Select the Global Catalog check box to add the global catalog, or clear the check box to remove the global catalog.
Global catalog servers and sites.
To optimize network performance in a multiple-site environment, consider adding global catalog servers in sites according to the needs in the sites for fast search responses and domain logons. It is recommended to make all domain controllers be global catalog severs if possible. In a single-site, multiple-domain environment, a single global catalog server is usually sufficient to cover common Active Directory queries and logons.
Q8. You have a server named Server2 that runs Windows Server 2012 R2. Server2 has the Hyper-V server role installed.
The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server2 named VM1.
You need to ensure that you can configure a pass-through disk for VM1. What should you do?
A. Convert Disk 1 to a basic disk.
B. Take Disk 1 offline.
C. Create a partition on Disk 1.
D. Convert Disk 1 to a MBR disk.
Answer: B
Explanation:
Pass-through Disk Configuration
Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective
Q9. Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install the Windows PowerShell 2.0 engine on DC1.
D. Install Remote Server Administration Tools on DC2.
E. Install Windows Management Framework 3.0 on DC2.
Answer: A,E
Explanation:
In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool.
You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems.
Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers.
Reference:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Q10. You have a server named Server1 that has the Print and Document Services server role installed.
You need to provide users with the ability to manage print jobs on Server1 by using a web browser.
What should you do?
A. Start the Printer Extensions and Notifications service and set the service to start automatically.
B. Install the LPD Service role service.
C. Start the Computer Browser service and set the service to start automatically.
D. Install the Internet Printing role service.
Answer: D
Explanation:
References:
Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP).
http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731857.aspx
100% Renovate Microsoft 70-410 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/70-410-dumps.html (New 505 Q&As)