Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR13. ENSUREPASS-SR13 hosts a shared folder, named ENSUREPASSShare, which has been shared as ENSUREPASSShare$.
Which of the following is TRUE with regards to sharing the folder in this manner?
A. It allows all users to view ENSUREPASSShare when browsing the network.
B. It prevents users from viewing ENSUREPASSShare when browsing the network.
C. It only allows ENSUREPASS-SR13’s users to view ENSUREPASSShare.
D. It removes the permissions configured for ENSUREPASSShare.
Answer: B
Q2. - (Topic 3)
What should you do for server core so it can be managed from another server 2012 R2?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
H. 8
I. 9
J. 10
K. 11
L. 12
M. 13
N. 14
O. 15
Answer: A
Explanation:
You should join the server to the domain first. You can add workgroup servers to Server Manager on a domain joined server, however, you must first add the workgroup computer to the Trusted Hosts list using "Set-Item wsman:\localhost\Client\TrustedHostsWorkgroupServerName -Concatenate -Force"
Q3. DRAG DROP - (Topic 3)
Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24.
The company plans to open two branch offices. The offices will be configured as shown in the following table.
You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer.
The solution must minimize the number of unused IP addresses.
Which network prefixes should you select?
To answer, drag the appropriate network prefix to the correct branch office in the answer area.
Answer:
Q4. - (Topic 3)
You run a Windows 2012 R2 Hyper-V Role Server, you need to shrink the size of files.vhd (200GB).
Using the Edit Virtual Disk Wizard what option should you choose?
A. Compact
B. Shrink
C. Resize
D. Convert
Answer: D
Explanation:
After converting a dynamically expanding VHD to the VHDX format, a new Shrink menu
option becomes available in the Hyper-V UI as shown.
VHDX format VHDs only expose the Shrink option when there is free space in the VHDX
file to reclaim.
Q5. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. You promote Server1 to domain controller. You need to view the service location (SVR) records that Server1 registers on DNS. What should you do on Server1?
A. Open the Srv.sys file
B. Open the Netlogon.dns file
C. Run ipconfig/displaydns
D. Run Get-DnsServerDiagnostics
Answer: B
Q6. - (Topic 3)
Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.
You need to ensure that Server2 can communicate with the client computers on LAN2.
What should you do?
A. Change the metric of the 10.10.1.0 route.
B. Set the state of the Teredo interface to disable.
C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
D. Run route delete 172.23.2.0.
Answer: D
Explanation:
You should delete the route 172.23.2.0 to allow communication between the client computers and Server2. The route is used to identify PIv6 /IPv4 packets that are being sent.
Q7. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain have Windows Server 2012 R2 installed, while domain controllers have Windows Server 2008 R2 installed.
You are then tasked with deploying a new Windows Server 2012 R2 domain controller. You are preparing to install the DNS Server role, and enable the global catalog server option.
Which of the following actions should you take?
A. You should consider making use of Server Manager.
B. You should consider making use of the Active Directory Installation Wizard.
C. You should consider making use of the DHCP Installation Wizard
D. You should consider making use of TS Manager
Answer: A
Q8. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to perform the following storage configuration tasks on Server1:
Bring a disk named Disk1 online.
Defragment a volume named Volume1.
Remove a disk named Disk2 from a storage pool named Pool1.
Which cmdlet should you use to perform each task?
To answer, drag the appropriate cmdlets to the correct tasks. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q9. - (Topic 3)
You have a server named Server1 that has the Print and Document Services server role installed.
You need to provide users with the ability to manage print jobs on Server1 by using a web browser.
What should you do?
A. Start the Printer Extensions and Notifications service and set the service to start automatically.
B. Install the LPD Service role service.
C. Start the Computer Browser service and set the service to start automatically.
D. Install the Internet Printing role service.
Answer: D
Explanation:
References: Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP). http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731857.aspx
Q10. HOTSPOT - (Topic 2)
Your network contains a subnet named Subnet1. Subnet1 contains a DHCP server named
Server1.
You deploy a new subnet named Subnet2. On Subnet2, you deploy a new server named
Server2 that runs Windows Server 2012 R2.
You need to configure Server2 to route DHCP broadcast from Subnet2 to Server1.
Which server role should you install on Server2?
To answer, select the appropriate role in the answer area.
Answer:
Q11. - (Topic 3)
How can you manage a newly installed Windows Server 2012 R2 core from a another Windows Server 2012 R2 with computer manager?
Exhibit:
A. 1
B. 2
C. 4
D. 8
Answer: A
Q12. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
A server named, ENSUREPASS-SR13, has a Server Core Installation of Windows Server 2012 installed.
You are instructed to convert ENSUREPASS-SR13’s installation to a Server with GUI installation.
You want to use a Windows PowerShell cmdlet that uses Windows Update as a source.
Which of the following actions should you take?
A. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart cmdlet.
B. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart -Source c:\mountdir\windows\winsxs cmdlet.
C. You should consider making use of the Uninstall-WindowsFeature Server-Gui-Shell–Remove cmdlet.
D. You should consider making use of the Set-ExecutionPolicy cmdlet.
Answer: B
Explanation:
The default installation source is Windows Update (provided that the server is connected to
the internet).
The Full GUI Server Interface provides you with the full GUI of Windows Server 2012 R2.
PowerShell Command: Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell.
When it’s done, we will need to restart our server by using the Shutdown command:
shutdown -r -t 0
Q13. - (Topic 3)
You have a Hyper-V host named Hyper1 that runs Windows Server 2012 R2.
Hyper1 hosts several virtual machines that run Windows 8.1.
Several developers connect to the virtual machines by using the Virtual Machine Connection tool.
You need to ensure that the devlopers can print to their local printers from within virtual machine sessions.
What should you configure?
A. a virtual switch on Hyper1
B. Remote Desktop Services (RDS) on Hyper1
C. enhanced session mode on Hyper1
D. a virtual network adapter on the virtual machines
Answer: C
Explanation: To be able to use a computer’s local resources on a virtual machine:
* The Hyper-V host must have Enhanced session mode policy and Enhanced session mode settings turned on.
* The computer that you use to connect to the virtual machine with VMConnect must run Windows 8, Windows 8.1, Windows Server 2012, or Windows Server 2012 R2.
* The virtual machine must have Remote Desktop Services enabled and run Windows Server 2012 R2 or Windows 8.1 as the guest operating system.
Reference: Use local resources on Hyper-V virtual machine with VMConnect
https://technet.microsoft.com/en-us/library/dn282274.aspx
Q14. DRAG DROP - (Topic 2)
Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012 R2.All client computers run Windows 8.
The domain contains a security group named Group1.
You have a Group Policy object (GPO) named GPO1.GPO1 is linked to the domain.
You need to ensure that only the members of Group1 can run the applications shown in the
following table.
Which type of application control policy should you implement for each application?
To answer, drag the appropriate rule types to the correct applications. Each rule type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q15. - (Topic 3)
Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01.
The domain contains an administrator account named Admin1.
You need to prevent Admin1 from creating more than 100 objects in the domain partition.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: D
Explanation:
Active Directory quotas are limits on the number of objects that a security principal (that has been delegated the Create Child Objects or Delete Child Objects permission) can own and create. To assign a quota to a security principal, you must use the directory services tools. The command and required parameters for assigning a quota to a security principal are as follows:
dsadd quota –part <partition distinguished name> –qlimit <quotalimit> –acct <security prinicipal>
Reference: Active Directory Quotas
https://technet.microsoft.com/en-us/library/cc904295(v=ws.10).aspx