Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. HOTSPOT
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed.
You need to configure the ports on Server1 to ensure that client computers can establish VPN connections to Server1. The solution must NOT require the use of certificates or pre-shared keys.
What should you modify?
To answer, select the appropriate object in the answer area.
Answer:
Q2. Your network contains two Active Directory forests named adatum.com and contoso.com. The network contains three servers. The servers are configured as shown in the following table.
You need to ensure that connection requests from adatum.com users are forwarded to Server2 and connection requests from contoso.com users are forwarded to Server3.
Which two should you configure in the connection request policies on Server1? (Each correct answer presents part of the solution. Choose two.)
A. The Authentication settings
B. The Standard RADIUS Attributes settings
C. The Location Groups condition
D. The Identity Type condition
E. The User Name condition
Answer: A,E
Explanation:
The User Name attribute group contains the User Name attribute. By using this attribute, you can designate the user name, or a portion of the user name, that must match the user name supplied by the access client in the RADIUS message. This attribute is a character string that typically contains a realm name and a user account name. You can use pattern-matching syntax to specify user names.
By using this setting, you can override the authentication settings that are configured in all network policies and you can designate the authentication methods and types that are required to connect to your network. Forward requests to the following remote RADIUS server group . By using this setting, NPS forwards connection requests to the remote RADIUS server group that you specify. If the NPS server receives a valid Access-Accept message that corresponds to the Access-Request message, the connection attempt is considered authenticated and authorized. In this case, the NPS server acts as a RADIUS proxy
Connection request policies are sets of conditions and profile settings that give network administrators flexibility in configuring how incoming authentication and accounting request messages are handled by the IAS server. With connection request policies, you can create a series of policies so that some RADIUS request messages sent from RADIUS clients are processed locally (IAS is being used as a RADIUS server) and other types of messages are forwarded to another RADIUS server (IAS is being used as a RADIUS proxy). This capability allows IAS to be deployed in many new RADIUS scenarios.
With connection request policies, you can use IAS as a RADIUS server or as a RADIUS proxy, based on the time of day and day of the week, by the realm name in the request, by the type of connection being requested, by the IP address of the RADIUS client, and so on.
References: http: //technet. microsoft. com/en-us/library/cc757328. aspx
http: //technet. microsoft. com/en-us/library/cc753603. aspx
Q3. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server2, Server3, and Server4.
Server2 and Server4 host a Distributed File System (DFS) namespace named Namespace1.
You open the DFS Management console as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Q4. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. Cluster1 hosts 10 virtual machines. All of the virtual machines run Windows Server 2012 R2 and are members of the domain.
You need to ensure that the first time a service named Service1 fails on a virtual machine, the virtual machine is moved to a different node.
You configure Service1 to be monitored from Failover Cluster Manager.
What should you configure on the virtual machine?
A. From the General settings, modify the Startup type.
B. From the General settings, modify the Service status.
C. From the Recovery settings of Service1, set the First failure recovery action to Take No Action.
D. From the Recovery settings of Service1, set the First failure recovery action to Restart the Service.
Answer: C
Explanation:
Configure the virtual machine to take no action through Hyper-V if the physical computer shuts down by modifying the Automatic Stop Action setting to None. Virtual machine state must be managed through the Failover Clustering feature.
Virtual machine application monitoring and management
In clusters running Windows Server 2012, administrators can monitor services on clustered virtual machines that are also running Windows Server 2012. This functionality extends the high-level monitoring of virtual machines that is implemented in Windows Server 2008 R2 failover clusters. If a monitored service in a virtual machine fails, the service can be restarted, or the clustered virtual machine can be restarted or moved to another node (depending on service restart settings and cluster failover settings). This feature increases the uptime of high availability services that are running on virtual machines within a failover cluster.
Windows Server 2012 Failover Cluster introduces a new capability for Hyper-V virtual machines (VMs), which is a basic monitoring of a service within the VM which causes the VM to be rebooted should the monitored service fail three times. For this feature to work the following must be configured:
. Both the Hyper-V servers must be Windows Server 2012 and the guest OS
running in the VM must be Windows Server 2012.
. The host and guest OSs are in the same or at least trusting domains.
. The Failover Cluster administrator must be a member of the local administrator's group inside the VM. Ensure the service being monitored is set to Take No Action (see screen shot below) within the guest VM for Subsequent failures (which is used after the first and second failures) and is set via the Recovery tab of the service properties within the Services application (services. msc).
Within the guest VM, ensure the Virtual Machine Monitoring firewall exception is enabled for the Domain network by using the Windows Firewall with Advanced Security application or by using the Windows PowerShell command below: Set-NetFirewallRule -DisplayGroup "Virtual Machine Monitoring" -Enabled True.
After the above is true, enabling the monitoring is a simple process: Launch the Failover Cluster Manager tool. Navigate to the cluster - Roles. Right click on the virtual machine role you wish to enable monitoring for and under More Actions select Configure Monitoring.
. The services running inside the VM will be gathered and check the box for the services that should be monitored and click OK.
You are done!
Monitoring can also be enabled using the Add-ClusterVMMonitoredItemcmdlet and -VirtualMachine, with the -Service parameters, as the example below shows: PS C:\Windows\system32> Add-ClusterVMMonitoredItem -VirtualMachine savdaltst01 -Service spooler
References:
http: //sportstoday. us/technology/windows-server-2012---continuous-availability-%28part-4%29---failover-clustering-enhancements---virtual-machine-monitoring-. aspx
http: //windowsitpro. com/windows-server-2012/enable-windows-server-2012-failover-cluster-hyper-v-vm-monitoring
http: //technet. microsoft. com/en-us/library/cc742396. aspx
Q5. Your company has a main office and two branch offices. The main office is located in New York. The branch offices are located in Seattle and Chicago.
The network contains an Active Directory domain named contoso.com. An Active Directory site exists for each office. Active Directory site links exist between the main office and the branch offices. All servers run Windows Server 2012 R2.
The domain contains three file servers. The file servers are configured as shown in the following table.
You implement a Distributed File System (DFS) replication group named ReplGroup.
ReplGroup is used to replicate a folder on each file server. ReplGroup uses a hub and spoke topology. NYC-SVR1 is configured as the hub server.
You need to ensure that replication can occur if NYC-SVR1 fails.
What should you do?
A. Create an Active Directory site link bridge.
B. Create an Active Directory site link.
C. Modify the properties of Rep1Group.
D. Create a connection in Rep1Group.
Answer: D
Explanation:
Unsure about this answer.
D:
A:
The Bridge all site links option in Active Directory must be enabled. (This option is available in the Active Directory Sites and Services snap-in.) Turning off Bridge all site links can affect the ability of DFS to refer client computers to target computers that have the least expensive connection cost. An Intersite Topology Generator that is running Windows Server 2003 relies on the Bridge all site links option being enabled to generate the intersite cost matrix that DFS requires for its site-costing functionality. If you turn off this option, you must create site links between the Active Directory sites for which you want DFS to calculate accurate site costs. Any sites that are not connected by site links will have the maximum possible cost. For more information about site link bridging, see “Active Directory Replication Topology Technical Reference.”
Reference:
http: //faultbucket. ca/2012/08/fixing-a-dfsr-connection-problem/
http: //faultbucket. ca/2012/08/fixing-a-dfsr-connection-problem/
http: //technet. microsoft. com/en-us/library/cc771941. aspx
Q6. HOTSPOT
You have a server named Server4 that runs Windows Server 2012 R2. Server4 has the Windows Deployment Services server role installed.
Server4 is configured as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Q7. HOTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains two Active Directory sites named Site1 and Site2.
You plan to deploy a read-only domain controller (RODC) named DC10 to Site2. You pre-create the DC10 domain controller account by using Active Directory Users and Computers.
You need to identify which domain controller will be used for initial replication during the promotion of the RODC.
Which tab should you use to identify the domain controller?
To answer, select the appropriate tab in the answer area.
Answer:
Q8. Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and 10 web servers. All of the web servers are in an organizational unit (OU) named WebServers_OU. All of the servers run Windows Server 2012 R2.
On Server1, you need to collect the error events from all of the web servers. The solution must ensure that when new web servers are added to WebServers_OU, their error events are collected automatically on Server1.
What should you do?
A. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
B. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
C. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
D. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
Answer: A
Explanation:
Source-initiated subscriptions allow you to define a subscription on an event collector computer without defining the event source computers, and then multiple remote event source computers can be set up (using a group policy setting) to forward events to the event collector computer. This differs from a collector initiated subscription because in the collector initiated subscription model, the event collector must define all the event sources in the event subscription.
1. Run the following command from an elevated privilege command prompt on the
Windows Server domain controller to configure Windows Remote Management: winrm qc –q.
2. Start group policy by running the following command: %SYSTEMROOT%\System32\gpedit. msc.
3. Under the Computer Configuration node, expand the Administrative Templates node, then expand the Windows Components node, then select the Event Forwarding node.
4. Right-click the SubscriptionManager setting, and select Properties. Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting. Add at least one setting that specifies the event collector computer. The SubscriptionManager Properties window contains an Explain tab that describes the syntax for the setting.
5. After the SubscriptionManager setting has been added, run the following command to ensure the policy is applied: gpupdate /force.
If you want to configure a source computer-initiated subscription, you need to configure the following group policies on the computers that will act as the event forwarders:
* (A) Configure Target Subscription Manager This policy enables you to set the location of the collector computer.
Q9. Your network contains two Active Directory forests named contoso.com and adatum.com. The contoso.com forest contains a server named Server1.contoso.com. The adatum.com forest contains a server named server2. adatum.com. Both servers have the Network Policy Server role service installed.
The network contains a server named Server3. Server3 is located in the perimeter network and has the Network Policy Server role service installed.
You plan to configure Server3 as an authentication provider for several VPN servers.
You need to ensure that RADIUS requests received by Server3 for a specific VPN server are always forwarded to Server1.contoso.com.
Which two should you configure on Server3? (Each correct answer presents part of the solution. Choose two.)
A. Remediation server groups
B. Remote RADIUS server groups
C. Connection request policies
D. Network policies
E. Connection authorization policies
Answer: B,C
Explanation:
To configure NPS as a RADIUS proxy, you must create a connection request policy that contains all of the information required for NPS to evaluate which messages to forward and where to send the messages.
When you configure Network Policy Server (NPS) as a Remote Authentication Dial-In User Service (RADIUS) proxy, you use NPS to forward connection requests to RADIUS servers that are capable of processing the connection requests because they can perform authentication and authorization in the domain where the user or computer account is located. For example, if you want to forward connection requests to one or more RADIUS servers in untrusted domains, you can configure NPS as a RADIUS proxy to forward the requests to the remote RADIUS servers in the untrusted domain. To configure NPS as a RADIUS proxy, you must create a connection request policy that contains all of the information required for NPS to evaluate which messages to forward and where to send the messages.
When you configure a remote RADIUS server group in NPS and you configure a connection request policy with the group, you are designating the location where NPS is to forward connection requests.
References: http: //technet. microsoft. com/en-us/library/cc754518. aspx
http: //technet. microsoft. com/en-us/library/cc754518. aspx
http: //technet. microsoft. com/en-us/library/cc754518. aspx
Q10. Your network contains an Active Directory domain named contoso.com. All domain
controllers run Windows Server 2012 R2. One of the domain controllers is named DC1. The DNS zone for the contoso.com zone is Active Directory-integrated and has the default settings.
A server named Server1 is a DNS server that runs a UNIX-based operating system.
You plan to use Server1 as a secondary DNS server for the contoso.com zone.
You need to ensure that Server1 can host a secondary copy of the contoso.com zone.
What should you do?
A. From DNS Manager, modify the Advanced settings of DC1.
B. From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.
C. From Windows PowerShell, run the Set-DnsServerForwardercmdlet and specify the contoso.com zone as a target.
D. From DNS Manager, modify the Security settings of DC1.
Answer: C
Explanation:
There are two ways that a secondary DNS server can be added. In both scenarios you will need to add the new server to the Forwarders list of the primary Domain Controller.
1. The Set-DnsServerForwarder cmdlet changes forwarder settings on a Domain Name System (DNS) server.
2. From the primary server, open DNS Manager, right click on the server name and select Properties. Click on the Forwarders tab and click the Edit button in the middle of the dialogue box.
Q11. HOTSPOT
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has two network adapters and is located in a perimeter network.
You need to install the RIP version 2 routing protocol on Server1.
Which node should you use to add the RIP version 2 routing protocol?
To answer, select the appropriate node in the answer area.
Answer:
Q12. Your network contains an Active Directory forest named contoso.com. The functional level of the forest is Windows Server 2008 R2.
All of the user accounts in the marketing department are members of a group named Contoso\MarketingUsers. All of the computer accounts in the marketing department are members of a group named Contoso\MarketingComputers.
A domain user named User1 is a member of the Contoso\MarketingUsers group. A computer named Computer1 is a member of the Contoso\MarketingComputers group.
You have five Password Settings objects (PSOs). The PSOs are defined as shown in the following table.
When User1 logs on to Computer1 and attempts to change her password, she receives an error message indicating that her password is too short.
You need to tell User1 what her minimum password length is.
What should you tell User1?
A. 10
B. 11
C. 12
D. 14
Answer: A
Explanation:
One PSO has a precedence value of 2 and the other PSO has a precedence value of 4. In this case, the PSO that has the precedence value of 2 has a higher rank and, hence, is applied to the object.
Q13. Your network contains a Hyper-V host named Hyperv1. Hyperv1 runs Windows Server 2012 R2.
Hyperv1 hosts four virtual machines named VM1, VM2, VM3, and VM4. AH of the virtual machines run Windows Server 2008 R2.
You need to view the amount of memory resources and processor resources that VM4 currently uses.
Which tool should you use on Hyperv1?
A. Windows System Resource Manager (WSRM)
B. Task Manager
C. Hyper-V Manager
D. Resource Monitor
Answer: C
Explanation:
Hyper-V Performance Monitoring Tool Know which resource is consuming more CPU. Find out if CPUs are running at full capacity or if they are being underutilized. Metrics tracked include Total CPU utilization, Guest CPU utilization, Hypervisor CPU utilization, idle CPU utilization, etc.
WSRM is deprecated starting with Windows Server 2012
Q14. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
In a remote site, a support technician installs a server named DC10 that runs Windows Server 2012 R2. DC10 is currently a member of a workgroup.
You plan to promote DC10 to a read-only domain controller (RODC).
You need to ensure that a user named Contoso\User1 can promote DC10 to a RODC in the contoso.com domain. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. From Active Directory Users and Computers, run the Delegation of Control Wizard on the contoso.com domain object.
B. From Active Directory Administrative Center, pre-create an RODC computer account.
C. From Ntdsutil, run the local roles command.
D. Join DC10 to the domain. Run dsmod and specify the /server switch.
Answer: B
Explanation:
A staged read only domain controller (RODC) installation works in two discrete phases:
1. Staging an unoccupied computer account
2. Attaching an RODC to that account during promotion
Reference: Install a Windows Server 2012 R2 Active Directory Read-Only Domain Controller (RODC)
Q15. Your network contains three Network Policy Server (NPS) servers named NPS1, NPS2, and NPS3.
NP51 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1.
You need to ensure that NPS2 receives connection requests. NPS3 must only receive connection requests if NPS2 is unavailable.
How should you configure Group1?
A. Change the Priority of NPS3 to 10.
B. Change the Weight of NPS2 to 10.
C. Change the Weight of NPS3 to 10.
D. Change the Priority of NPS2 to 10.
Answer: A
Explanation:
Priority. Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them.