Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the following role services installed:
. DirectAccess and VPN (RRAS)
. Network Policy Server
Remote users have client computers that run either Windows XP, Windows 7, or Windows 8.
You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN connections to Server1.
What should you configure on Server1?
A. A condition of a Network Policy Server (NPS) network policy
B. A constraint of a Network Policy Server (NPS) network policy
C. a condition of a Network Policy Server (NPS) connection request policy
D. A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy
Answer: A
Explanation:
If you want to configure the Operating System condition, click Operating System, and then click Add. In Operating System Properties, click Add, and then specify the operating system settings that are required to match the policy.
The Operating System condition specifies the operating system (operating system version or service pack number), role (client or server), and architecture (x86, x64, or ia64) required for the computer configuration to match the policy.
Q2. HOTSPOT
Your network contains an Active Directory domain named contoso.com. You implement DirectAccess.
You need to view the properties of the DirectAccess connection.
Which connection properties should you view? To answer, select the appropriate connection properties in the answer area.
Answer:
Q3. You have Windows Server 2012 R2 installation media that contains a file named Install.wim.
You need to identify which images are present in Install.wim.
What should you do?
A. Run imagex.exe and specify the /ref parameter.
B. Run dism.exe and specify the /get-mountedwiminfo parameter.
C. Run dism.exe and specify the /get-imageinfo parameter.
D. Run imagex.exe and specify the /verify parameter.
Answer: C
Explanation:
Option:
/Get-ImageInfo
Arguments:
/ImageFile: <path_to_image.wim>
[{/Index: <Image_index> | /Name: <Image_name>}]
Displays information about the images that are contained in the .wim, vhd or .vhdx file.
When used with the Index or /Name argument, information about the specified image is displayed, which includes if an image is a WIMBoot image, if the image is Windows 8.1
Update, see Take Inventory of an Image or Component Using DISM. The /Name argument does not apply to VHD files. You must specify /Index: 1 for VHD files.
References:
http: //technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx
http: //technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx
http: //technet.microsoft.com/en-us/library/hh825224.aspx
Q4. HOTSPOT
Your network contains one Active Directory domain named contoso.com. The domain contains 10 file servers that run Windows Server 2012 R2.
You plan to enable BitLocker Drive Encryption (BitLocker) for the operating system drives of the file servers.
You need to configure BitLocker policies for the file servers to meet the following requirements:
. Ensure that all of the servers use a startup PIN for operating system drives encrypted with BitLocker.
. Ensure that the BitLocker recovery key and recovery password are stored in Active
Directory. Which two Group Policy settings should you configure? To answer, select the appropriate settings in the answer area.
Answer:
Q5. HOTSPOT
Your network contains an Active Directory named contoso.com.
You have users named User1 and user2.
The Network Access Permission for User1 is set to Control access through NPS Network Policy. The Network Access Permission for User2 is set to Allow access.
A policy named Policy1 is shown in the Policy1 exhibit. (Click the Exhibit button.)
A policy named Policy2 is shown in the Policy2 exhibit. (Click the Exhibit button.)
A policy named Policy3 is shown in the Policy3 exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point.
Answer:
Q6. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
You have a Group Policy object (GPO) named GPO1 that contains hundreds of settings. GPO1 is linked to an organizational unit (OU) named OU1. OU1 contains 200 client computers.
You plan to unlink GPO1 from OU1.
You need to identify which GPO settings will be removed from the computers after GPO1 is unlinked from OU1.
Which two GPO settings should you identify? (Each correct answer presents part of the solution. Choose two.)
A. The managed Administrative Template settings
B. The unmanaged Administrative Template settings
C. The System Services security settings
D. The Event Log security settings
E. The Restricted Groups security settings
Answer: A,D
Explanation:
There are two kinds of Administrative Template policy settings: Managed and Unmanaged . The Group Policy service governs Managed policy settings and removes a policy setting when it is no longer within scope of the user or computer.
References: http: //technet. microsoft. com/en-us/library/cc778402(v=ws. 10). aspx http: //technet. microsoft. com/en-us/library/bb964258. aspx
Q7. Your network has a router named Router1 that provides access to the Internet. You have a server named Server1 that runs Windows Server 2012 R2. Server1 to use Router1 as the default gateway.
A new router named Router2 is added to the network. Router2 provides access to the Internet. The IP address of the internal interface on Router2 is 10.1.14.2S4.
You need to configure Server1 to use Router2 to connect to the Internet if Router1 fails.
What should you do on Server1?
A. Add a route for 10.1.14.0/24 that uses 10.1.14.254 as the gateway and set the metric to 1.
B. Add 10.1.14.254 as a gateway and set the metric to 1.
C. Add a route for 10.1.14.0/24 that uses 10.1.14.254 as the gateway and set the metric to 500.
D. Add 10.1.14.254 as a gateway and set the metric to 500.
Answer: C
Explanation:
To configure the Automatic Metric feature:
1. In Control Panel, double-click Network Connections.
2. Right-click a network interface, and then click Properties.
3. Click Internet Protocol (TCP/IP), and then click Properties.
4. On the General tab, click Advanced.
5. To specify a metric, on the IP Settings tab, click to clear the Automatic metric check box, and then enter the metric that you want in the Interface Metric field.
To manually add routes for IPv4
Open the Command Prompt window by clicking the Start button Picture of the Start button.
In the search box, type Command Prompt, and then, in the list of results, click Command Prompt.
At the command prompt, type route -p add [destination] [mask <netmask>] [gateway]
[metric <metric>] [if <interface>].
Q8. Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and 10 web servers. All of the web servers are in an organizational unit (OU) named WebServers_OU. All of the servers run Windows Server 2012 R2.
On Server1, you need to collect the error events from all of the web servers. The solution must ensure that when new web servers are added to WebServers_OU, their error events are collected automatically on Server1.
What should you do?
A. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
B. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
C. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
D. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
Answer: A
Explanation:
Source-initiated subscriptions allow you to define a subscription on an event collector computer without defining the event source computers, and then multiple remote event source computers can be set up (using a group policy setting) to forward events to the event collector computer. This differs from a collector initiated subscription because in the collector initiated subscription model, the event collector must define all the event sources in the event subscription.
1. Run the following command from an elevated privilege command prompt on the
Windows Server domain controller to configure Windows Remote Management: winrm qc –q.
2. Start group policy by running the following command: %SYSTEMROOT%\System32\gpedit. msc.
3. Under the Computer Configuration node, expand the Administrative Templates node, then expand the Windows Components node, then select the Event Forwarding node.
4. Right-click the SubscriptionManager setting, and select Properties. Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting. Add at least one setting that specifies the event collector computer. The SubscriptionManager Properties window contains an Explain tab that describes the syntax for the setting.
5. After the SubscriptionManager setting has been added, run the following command to ensure the policy is applied: gpupdate /force.
If you want to configure a source computer-initiated subscription, you need to configure the following group policies on the computers that will act as the event forwarders:
* (A) Configure Target Subscription Manager This policy enables you to set the location of the collector computer.
Q9. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Windows Server Update Services server role installed.
Server1 stores update files locally in C:\Updates.
You need to change the location in which the update files are stored to D:\Updates.
What should you do?
A. From the Update Services console, run the Windows Server Update Services Configuration Wizard.
B. From a command prompt, run wsusutil.exe and specify the movecontent parameter.
C. From the Update Services console, configure the Update Files and Languages option.
D. From a command prompt, run wsusutil.exe and specify the export parameter.
Answer: B
Explanation:
You might need to change the location where WSUS stores updates locally. This might be required if the disk becomes full and there is no longer any room for new updates. You might also have to do this if the disk where updates are stored fails and the replacement disk uses a new drive letter. You accomplish this move with the movecontent command of WSUSutil.exe, a command-line tool that is copied to the file system of the WSUS server during WSUS Setup. By default, Setup copies WSUSutil.exe to the following location: WSUSInstallationDrive:\Program Files\Microsoft Windows Server Update Services\Tools\
Q10. HOTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2 and are configured as DNS servers. All DNS zones are Active Directory-integrated. Active Directory Recycle Bin is enabled.
You need to modify the amount of time deleted objects are retained in the Active Directory Recycle Bin.
Which naming context should you use? To answer, select the appropriate naming context in the answer area.
Answer:
Q11. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
An organizational unit (OU) named OU1 contains 200 client computers that run Windows 8 Enterprise. A Group Policy object (GPO) named GPO1 is linked to OU1.
You make a change to GPO1.
You need to force all of the computers in OU1 to refresh their Group Policy settings immediately. The solution must minimize administrative effort.
Which tool should you use?
A. The Secedit command
B. Group Policy Management Console (GPMC)
C. Server Manager
D. The Gpupdate command
Answer: B
Explanation:
In the previous versions of Windows, this was accomplished by having the user run GPUpdate.exe on their computer.
Starting with Windows Server. 2012 and Windows. 8, you can now remotely refresh Group Policy settings for all computers in an OU from one central location through the Group Policy Management Console (GPMC). Or you can use the Invoke-GPUpdatecmdlet to refresh Group Policy for a set of computers, not limited to the OU structure, for example, if the computers are located in the default computers container.
http: //technet. microsoft. com/en-us//library/jj134201. aspx
http: //blogs. technet. com/b/grouppolicy/archive/2012/11/27/group-policy-in-windows-server-2012-using-remote-gpupdate. aspx
Q12. Your network contains an Active Directory domain named contoso.com. The domain contains a Web server named www.contoso.com. The Web server is available on the Internet.
You implement DirectAccess by using the default configuration.
You need to ensure that users never attempt to connect to www.contoso.com by using DirectAccess. The solution must not prevent the users from using DirectAccess to access other resources in contoso.com.
Which settings should you configure in a Group Policy object (GPO)?
A. DirectAccess Client Experience Settings
B. DNS Client
C. Name Resolution Policy
D. Network Connections
Answer: C
Explanation:
For DirectAccess, the NRPT must be configured with the namespaces of your intranet with a leading dot (for example, internal.contoso.com or . corp.contoso.com). For a DirectAccess client, any name request that matches one of these namespaces will be sent to the specified intranet Domain Name System (DNS) servers.
Include all intranet DNS namespaces that you want DirectAccess client computers to access.
There are no command line methods for configuring NRPT rules. You must use Group Policy settings. To configure the NRPT through Group Policy, use the Group Policy add-in at Computer Configuration \Policies\Windows Settings\Name Resolution Policy in the Group Policy object for DirectAccess clients. You can create a new NRPT rule and edit or delete existing rules. For more information, see Configure the NRPT with Group Policy.
Q13. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed.
On Server1, you create a network policy named Policy1.
You need to configure Policy1 to ensure that users are added to a VLAN.
Which attributes should you add to Policy1?
A. Tunnel-Tag, Tunnel-Password, Tunnel-Medium-Type, and Tunnel-Preference
B. Tunnel-Tag, Tunnel-Server-Auth-ID, Tunnel-Preference, and Tunnel-Pvt-Group-ID
C. Tunnel-Type, Tunnel-Tag, Tunnel-Medium-Type, and Tunnel-Pvt-Group-ID
D. Tunnel-Type, Tunnel-Password, Tunnel-Server-Auth-ID, and Tunnel-Pvt-Group-ID
Answer: C
Explanation:
VLAN attributes used in network policy
When you use network hardware, such as routers, switches, and access controllers that support virtual local area networks (VLANs), you can configure Network Policy Server (NPS) network policy to instruct the access servers to place members of Active Directory. groups on VLANs.
Before configuring network policy in NPS for VLANs, create groups of users in Active Directory Domain Services (AD DS) that you want to assign to specific VLANs. Then when you run the New Network Policy wizard, add the Active Directory group as a condition of the network policy.
You can create a separate network policy for each group that you want to assign to a VLAN. For more information, see Create a Group for a Network Policy. When you configure network policy for use with VLANs, you must configure the RADIUS standard attributes Tunnel-Medium-Type, Tunnel-Pvt-Group-ID, and Tunnel-Type. Some hardware vendors also require the use of the RADIUS standard attribute Tunnel-Tag.
To configure these attributes in a network policy, use the New Network Policy wizard to create a network policy. You can add the attributes to the network policy settings while running the wizard or after you have successfully created a policy with the wizard.
. Tunnel-Medium-Type. Select a value appropriate to the previous selections you made while running the New Network Policy wizard. For example, if the network policy you are configuring is a wireless policy, in Attribute Value, select 802 (Includes all 802 media plus Ethernet canonical format).
. Tunnel-Pvt-Group-ID. Enter the integer that represents the VLAN number to which group members will be assigned. For example, if you want to create a Sales VLAN for your sales team by assigning team members to VLAN 4, type the number 4.
. Tunnel-Type. Select the value Virtual LANs (VLAN).
. Tunnel-Tag. Some hardware devices do not require this attribute. If your hardware device requires this attribute, obtain this value from your hardware documentation.
Q14. HOTSPOT
Your network contains a RADIUS server named Admin1.
You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy Server (NPS) installed.
You need to ensure that all accounting requests for Server2 are forwarded to Admin1.
On Server2, you create a new remote RADIUS server group named Group1 that contains Admin1.
What should you configure next on Server2?
To answer, select the appropriate node in the answer area.
Answer:
Q15. Your network contains one Active Directory domain named contoso.com. The forest functional level is Windows Server 2012. All servers run Windows Server 2012 R2. All client computers run Windows 8.1.
The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. All domain controllers and RODCs are hosted on a Hyper-V host that runs Windows Server 2012 R2.
You need to identify which domain controllers are authorized to be cloned by using virtual domain controller cloning.
Which cmdlet should you use?
A. Get-ADGroupMember
B. Get-ADDomainControllerPasswordReplicationPolicy
C. Get-ADDomainControllerPasswordReplicationPolicyUsage
D. Get-ADDomain
E. Get-ADOptionalFeature
F. Get-ADAccountAuthorizationGroup
Answer: D
Explanation: One requirement for cloning a domain controller is an existing Windows Server 2012 DC that hosts the PDC emulator role. You can run the Get-ADDomain and retrieve which server has the PDC emulator role.
Example: Command Prompt: C:\PS> Get-ADDomain
Output wouldinclude a line such as: PDCEmulator : Fabrikam-DC1.Fabrikam.com
Reference: Step-by-Step: Domain Controller Cloning
http://blogs.technet.com/b/canitpro/archive/2013/06/12/step-by-step-domain-controller-cloning.aspx
Reference: Get-ADDomain
https://technet.microsoft.com/en-us/library/ee617224.aspx