Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. You have a server named DNS1 that runs Windows Server 2012 R2.
You discover that the DNS resolution is slow when users try to access the company intranet home page by using the URL http://companyhome.
You need to provide single-label name resolution for CompanyHome that is not dependent on the suffix search order.
Which three cmdlets should you run? (Each correct answer presents part of the solution. Choose three.)
A. Add-DnsServerPrimaryZone
B. Add-DnsServerResourceRecordCName
C. Set-DnsServerDsSetting
D. Set-DnsServerGlobalNameZone
E. Set-DnsServerEDns
F. Add-DnsServerDirectory Partition
Answer: A,B,D
Explanation:
You can use this task to create a GlobalNames zone to maintain a set of single-label, Domain Name System (DNS) names that Windows Server 2008 DNS servers can resolve on behalf of DNS clients throughout a single forest in Active Directory Domain Services
(AD DS).
Deploying a GlobalNames zone in a single forest requires that you perform the following
steps:
. (A) Create a zone named GlobalNames that replicates to all domain controllers in the forest.
. (B) Add an alias (CNAME) record to the zone for each host for which you want to provide single-label name resolution. For example, if you want DNS clients to be able to access a server whose fully qualified domain name (FQDN) is cweb.itgroup.contoso.com, add an alias (CNAME) resource record that maps the name cweb to cweb.igroup.contoso.com.
Note:
A. The Add-DnsServerPrimaryZone cmdlet adds a specified primary zone on a Domain Name System (DNS) server.
B. The Add-DnsServerResourceRecordCName cmdlet adds a canonical name (CNAME) resource record to a specified Domain Name System (DNS) zone. A CNAME record allows you to use more than one resource record to refer to a single host
D. The Set-DnsServerGlobalNameZone cmdlet enables or disables single-label Domain Name System (DNS) queries. It also changes configuration settings for a GlobalNames zone. The GlobalNames zone supports short, easy-to-use names instead of fully qualified domain names (FQDNs) without using Windows Internet Name Service (WINS) technology. For instance, DNS can query SarahJonesDesktop instead of SarahJonesDesktop.contoso.com.
Reference: Adding a GlobalNames zone to a forest
https://technet.microsoft.com/en-us/library/cc816717(v=ws.10).aspx
Q2. Your network contains an Active Directory domain named adatum.com. The domain contains two sites named Site1 and Site2 and two domain controllers named DC1 and DC2. DC1 is located in Site1 and DC2 is located in Site2.
You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2.
A technician connects DC3 to Site2.
You discover that users in Site2 are authenticated only by DC2.
You need to ensure that the users in Site2 are authenticated by both DC2 and DC3.
What should you do?
A. In Active Directory Users and Computers, configure the msDS-PrimaryComputer attribute for DC3.
B. In Active Directory Users and Computers, configure the msDS-Site-Affinity attribute for DC3.
C. From Active Directory Sites and Services, move DC3.
D. From Active Directory Sites and Services, modify the site link between Site1 and Site2.
Answer: C
Explanation:
DC3 needs to be moved to Site2 in AD DS
Reference: Move a domain controller between sites
http://technet.microsoft.com/en-us/library/cc759326(v=ws.10).aspx
Q3. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2.
You create a user account named User1 in the domain.
You need to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimize the number of administrative rights assigned to User1.
What should you do?
A. Add User1 to the Backup Operators group.
B. Add User1 to the Power Users group.
C. Assign User1 the Backup files and directories user right and the Restore files and directories user right.
D. Assign User1 the Backup files and directories user right.
Answer: D
Explanation:
Backup Operators have these permissions by default:
However the question explicitly says we need to minimize administrative rights. Since the requirement is for backing up the data only--no requirement to restore or shutdown--then assigning the "Back up files and directories user right" would be the correct answer.
Reference: Default local groups
http://technet.microsoft.com/en-us/library/cc787956(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc756898(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc771990.aspx
Q4. HOTSPOT
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
On DC1, you create an Active Directory-integrated zone named Zone1. You verify that
Zone1 replicates to DC2.
You use DNSSEC to sign Zone1.
You discover that the updates to Zone1 fail to replicate to DC2.
You need to ensure that Zone1 replicates to DC2.
What should you configure on DC1?
To answer, select the appropriate tab in the answer area.
Answer:
Q5. HOTSPOT
Your network contains three application servers that run Windows Server 2012 R2. The application servers have the Network Load Balancing (NLB) feature installed.
You create an NLB cluster that contains the three servers.
You plan to deploy an application named App1 to the nodes in the cluster. App1 uses TCP port 8080 and TCP port 8081.
Clients will connect to App1 by using HTTP and HTTPS. When clients connect to App1 by using HTTPS, session state information will be retained locally by the cluster node that responds to the client request.
You need to configure a port rule for Appl.
Which port rule should you use?
To answer, select the appropriate rule in the answer area.
Answer:
Q6. You have a server named FS1 that runs Windows Server 2012 R2.
You install the File and Storage Services server role on FS1.
From Windows Explorer, you view the properties of a shared folder named Share1 and you
discover that the Classification tab is missing.
You need to ensure that you can assign classifications to Share1 from Windows Explorer
manually.
What should you do?
A. From Folder Options, select Show hidden files, folders, and drives.
B. From Folder Options, clear Use Sharing Wizard (Recommend).
C. Install the File Server Resource Manager role service.
D. Install the Enhanced Storage feature.
Answer: C
Explanation:
On the Classification tab of the file properties in Windows Server 2012, File Classification Infrastructure adds the ability to manually classify files. You can also classify folders so that any file added to the classified folder will inherit the classifications of the parent folder.
Reference: What's New in File Server Resource Manager in Windows Server
Q7. Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed.
Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1.
Server3 currently has no virtual machines.
You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.
Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)
A. The Hyper-V Manager console connected to Server3
B. The Failover Cluster Manager console connected to Server3
C. The Hyper-V Manager console connected to Server1.
D. The Failover Cluster Manager console connected to Cluster1
E. The Hyper-V Manager console connected to Server2
Answer: A,D
Explanation:
A. To configure the Replica server [on a server that is not part of a cluster which in this case is Server3] In Hyper-V Manager, click Hyper-V Settings in the Actions pane. In the Hyper-V Settings dialog, click Replication Configuration.
In the Details pane, select Enable this computer as a Replica server. Etc.
D. To configure a Replica server that is part of a failover cluster.
1. In Server Manager, open Failover Cluster Manager.
2. In the left pane, connect to the cluster, and while the cluster name is highlighted, click Roles in the Navigate category of the Details pane.
3. Right-click the role and choose Replication Settings.
4. In the Details pane, select Enable this cluster as a Replica server. Etc.
Reference: Deploy Hyper-V Replica , Step 2: Enable Replication
http://technet.microsoft.com/en-us/library/jj134240.aspx
Q8. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two Active Directory sites named Site1 and Site2.
You discover that when the account of a user in Site1 is locked out, the user can still log on to the servers in Site2 for up to 15 minutes by using Remote Desktop Services (RDS).
You need to reduce the amount of time it takes to synchronize account lockout information across the domain.
Which attribute should you modify?
To answer, select the appropriate attribute in the answer area.
Answer:
Q9. You have a server named Server1 that runs Windows Server 2012 R2 and is used for testing.
A developer at your company creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1 will no longer start.
You need to ensure that the developer can test the new driver. The solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Disable Driver Signature Enforcement
B. Disable automatic restart on system failure
C. Last Know Good Configuration (advanced)
D. Repair Your Computer
Answer: A
Explanation:
A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel-mode driver only if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate early driver development and non-automated testing.
Incorrect:
Not B. specifies that Windows automatically restarts your computer when a failure occurs.
Not C. Developer would not be able to test the driver as needed.
Not D. Removes or repairs critical windows files, Developer would not be able to test the
driver as needed and some file loss.
Reference: Installing Windows Server 2012.
http://technet.microsoft.com/en-us/library/jj134246.aspx
http://msdn.microsoft.com/en-us/library/windows/hardware/ff547565(v=vs.85).aspx
Q10. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA).
You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes:
Email security
Client authentication
Encrypting File System (EFS)
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From a Group Policy, configure the Certificate Services Client – Auto-Enrollment settings.
B. From a Group Policy, configure the Certificate Services Client – Certificate Enrollment Policy settings.
C. Modify the properties of the User certificate template, and then publish the template.
D. Duplicate the User certificate template, and then publish the template.
E. From a Group Policy, configure the Automatic Certificate Request Settings settings.
Answer: A,D
Explanation:
The default user template supports all of the requirements EXCEPT auto enroll as shown below:
However a duplicated template from users has the ability to autoenroll:
The Automatic Certificate Request Settings GPO setting is only available to Computer, not user.
Reference: Manage Certificate Enrollment Policy by Using Group Policy. http://technet.microsoft.com/en-us/library/dd851772.aspx
Q11. HOTSPOT
You have a server that runs Windows Server 2012 R2 and has the iSCSI Target Server role service installed.
You run the New-IscsiVirtualDisk cmdlet as shown in the New-IscsiVirtualDisk exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibits. Each correct selection is worth one point.
Answer:
Q12. HOTSPOT
Your network contains one Active Directory forest named contoso.com. The forest contains the domain controllers configured as shown in the following table.
You perform the following actions:
. Create a file named File1.txt in the SYSVOL folder on DC1.
. Create a user named User1 on DC4. You need to identify on which domain controller or controllers a copy of each object is stored.
What should you identify? To answer, select the appropriate options in the answer area.
Answer:
Q13. Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
You need to enable universal group membership caching for the Europe office and Asia office sites.
What should you use?
A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom
Answer: B
Explanation:
https://technet.microsoft.com/en-us/library/hh852305(v=wps.630).aspx
Q14. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. All servers run Windows Server 2012 R2.
You install the IP Address Management (IPAM) Server feature on Server1.
From the Provision IPAM wizard, you select the Group Policy Based provisioning method and enter a GPO name prefix of IPAM1.
You need to provision IPAM by using Group Policy.
What command should you run on Server1 to complete the process? To answer, select the appropriate options in the answer area.
Answer:
Q15. DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookup enterprise registration and you receive the following results:
You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request?
To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q16. HOTSPOT
Your company has a main office and a branch office. An Active Directory site exists for each office.
The network contains an Active Directory forest named contoso.com. The contoso.com domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server 2012 R2.
In the main office, you configure Server1 as a file server that uses BranchCache.
In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.
You are creating a Group Policy for the branch office site.
Which two Group Policy settings should you configure?
To answer, select the appropriate two settings in the answer area.
Answer: