Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. You have a server named FS1 that runs Windows Server 2012 R2.
You install the File and Storage Services server role on FS1.
From Windows Explorer, you view the properties of a shared folder named Share1 and you
discover that the Classification tab is missing.
You need to ensure that you can assign classifications to Share1 from Windows Explorer
manually.
What should you do?
A. From Folder Options, select Show hidden files, folders, and drives.
B. From Folder Options, clear Use Sharing Wizard (Recommend).
C. Install the File Server Resource Manager role service.
D. Install the Enhanced Storage feature.
Answer: C
Explanation:
On the Classification tab of the file properties in Windows Server 2012, File Classification Infrastructure adds the ability to manually classify files. You can also classify folders so that any file added to the classified folder will inherit the classifications of the parent folder.
Reference: What's New in File Server Resource Manager in Windows Server
Q2. HOTSPOT
Your network contains an Active Directory domain named contoso.com. All client
computers run Windows 8 Enterprise.
You have a remote site that only contains client computers. All of the client computer
accounts are located in an organizational unit (OU) named Remote1. A Group Policy object
(GPO) named GPO1 is linked to the Remote1 OU.
You need to configure BranchCache for the remote site.
Which two settings should you configure in GPO1?
To answer, select the two appropriate settings in the answer area.
Answer:
Q3. Your network contains an Active Directory forest named contoso.com. The forest contains four domains. All servers run Windows Server 2012 R2.
Each domain has a user named User1.
You have a file server named Server1 that is used to synchronize user folders by using the Work Folders role service.
Server1 has a work folder named Sync1.
You need to ensure that each user has a separate folder in Sync1.
What should you do?
A. From Windows Explorer, modify the Sharing properties of Sync1.
B. Run the Set-SyncServerSetting cmdlet.
C. From File and Storage Services in Server Manager, modify the properties of Sync1.
D. Run the Set-SyncShare cmdlet.
Answer: D
Explanation:
The Set-SyncShare cmdlet modifies the settings for a sync share.
Example: Modify a sync share to add a user group
This example modifies settings on the share named Share01, and enables the user group
named ContosoEngGroup to access the share.
The first command uses the Get-SyncShare cmdlet to retrieve the sync share for Share01,
and assigns the results to the variable $Current.
The second command uses the Set-SyncShare cmdlet to modify the sync share and add
the current user and the ContosoEngGroup to the list of users allowed to access the share.
PS C:\> $Current = Get-SyncShare Share01
PS C:\> Set-SyncShare Share01 -User $Current.user,"ContosoEngGroup"
PS C:\> Get-SyncShare Share01 // See %username below% !!
ConflictResolutionPolicy : KeepLatest
Description :
DevicePolicy : Share01
Enabled : True ExclusiveAccessToUser : False Name : Share01 Path : K:\Share01 StagingFolder : K:\EcsStagingArea\Share01 StagingQuota : 1099511627776 StagingQuotaPerUser : 10737418240 Type : User Data User : {HRGroup, EngGroup} UserFolderName : %username% // <-- This line!! PSComputerName
Reference: Set-SyncShare
http://technet.microsoft.com/en-US/library/dn296649.aspx
Q4. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link.
Server2 hosts a virtual machine named VM1.
You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.
What should you do?
A. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.
B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1.
C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.
D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for VM1.
Answer: D
Explanation:
You first have to enable replication on the Replica server--Server1--by going to the server and modifying the "Replication Configuration" settings under Hyper-V settings. You then go to VM1--which presides on Server2-- and run the "Enable Replication" wizard on VM1.
Q5. HOTSPOT
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed.
Server1 and Server2 have different processor models from the same manufacturer.
On Server1, you plan to create a virtual machine named VM1. Eventually, VM1 will be
exported to Server2.
You need to ensure that when you import VM1 to Server2, you can start VM1 from saved
snapshots.
What should you configure on VM1?
To answer, select the appropriate node in the answer area.
Answer:
Q6. Your company has a main office and a branch office.
The main office contains a file server named Server1. Server1 has the BranchCache for
Network Files role service installed. The branch office contains a server named Server2.
Server2 is configured as a BranchCache hosted cache server.
You need to preload the data from the file shares on Server1 to the cache on Server2.
What should you run first?
A. Publish-BCFileContent
B. Add- BCDataCacheExtension
C. Set-BCCache
D. Export-BCCachePackage
Answer: A
Explanation:
See step 2 below.
To prehash content and preload the content on hosted cache servers . Log on to the file or Web server that contains the data that you wish to preload, and identify the folders and files that you wish to load on one or more remote hosted cache servers. . Run Windows PowerShell as an Administrator. For each folder and file, run either the Publish-BCFileContent command or the Publish-BCWebContent command, depending on the type of content server, to trigger hash generation and to add data to a data package. . After all the data has been added to the data package, export it by using the Export-BCCachePackage command to produce a data package file. . Move the data package file to the remote hosted cache servers by using your choice of file transfer technology. FTP, SMB, HTTP, DVD and portable hard disks are all viable transports. . Import the data package file on the remote hosted cache servers by using the Import-BCCachePackage command.
Reference: Prehashing and Preloading Content on Hosted Cache Servers (Optional)
Q7. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2. The administrator configures IPAM by using Group Policy based provisioning and starts server discovery.
You plan to create Group Policies for IPAM provisioning.
You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.
What should you do on Server2?
A. From Server Manager, review the IPAM overview.
B. Run the ipamgc.exe tool.
C. From Task Scheduler, review the IPAM tasks.
D. Run the Get-IpamConfiguration cmdlet.
Answer: D
Explanation:
Example:
http://i.imgur.com/YcHLXhr.jpg
Q8. Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domain controllers in both of the forests run Windows Server 2012 R2. The adatum.com domain contains a file server named Servers.
Adatum.com has a one-way forest trust to contoso.com.
A contoso.com user name User10 attempts to access a shared folder on Servers and receives the error message shown in the exhibit. (Click the Exhibit button.)
You verify that the Authenticated Users group has Read permissions to the Data folder.
You need to ensure that User10 can read the contents of the Data folder on Server5 in the
adatum.com domain.
What should you do?
A. Grant the Other Organization group Read permissions to the Data folder.
B. Modify the list of logon workstations of the contoso\User10 user account.
C. Enable the Netlogon Service (NP-In) firewall rule on Server5.
D. Modify the permissions on the Server5 computer object in Active Directory.
Answer: D
Explanation:
* To resolve the issue, I had to open up AD Users and Computers --> enable Advanced Features --> Select the Computer Object --> Properties --> Security --> Add the Group I want to allow access to the computer (in this case, DomainA\Domain users) and allow "Allowed to Authenticate". Once I did that, everything worked:
* For users in a trusted Windows Server 2008 or Windows Server 2003 domain or forest to be able to access resources in a trusting Windows Server 2008 or Windows Server 2003 domain or forest where the trust authentication setting has been set to selective authentication, each user must be explicitly granted the Allowed to Authenticate permission on the security descriptor of the computer objects (resource computers) that reside in the trusting domain or forest.
Reference: Grant the Allowed to Authenticate Permission on Computers in the Trusting Domain or Forest.
http://technet.microsoft.com/en-us/library/cc816733(v=ws.10).aspx
Q9. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.
Which IPV6 scope prefix should you use?
A. 2001:123:4567:890A::
B. FE80:123:4567::
C. FF00:123:4567:890A::
D. FD00:123:4567::
Answer: D Explanation:
Explanation/Reference:
* A unique local address (ULA) is an IPv6 address in the block fc00::/7, defined in RFC
4193. It is the approximate IPv6 counterpart of the IPv4 private address.
The address block fc00::/7 is divided into two /8 groups:
/ The block fc00::/8 has not been defined yet.
/ The block fd00::/8 is defined for /48 prefixes, formed by setting the 40 least-significant bits
of the prefix to a randomly generated bit string.
* Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address
ranges:
/ They are not allocated by an address registry and may be used in networks by anyone
without outside involvement.
/ They are not guaranteed to be globally unique.
/ Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot
be delegated in the global DNS.
Reference: RFC 4193
Q10. You create a new virtual disk in a storage pool by using the New Virtual Disk Wizard. You discover that the new virtual disk has a write-back cache of 1 GB.
You need to ensure that the virtual disk has a write-back cache of 5 GB.
What should you do?
A. Detach the virtual disk, and then run the Resize-VirtualDisk cmdlet.
B. Detach the virtual disk, and then run the Set-VirtualDisk cmdlet.
C. Delete the virtual disk, and then run the New-StorageSubSystemVirtualDisk cmdlet.
D. Delete the virtual disk, and then run the New-VirtualDisk cmdlet.
Answer: D
Explanation:
So what about changing the cache size? Well, you can't modify the cache size, but you can specify it at the time that you create a new virtual hard disk. In order to do so, you have to use Windows PowerShell.
New-VirtualDisk –StoragePoolFriendlyName "<storage pool name>" –FriendlyName "<v
Reference: Using Windows Server 2012's SSD Write-Back Cache
Q11. Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012 R2.
The domain contains four servers. The servers are configured as shown in the following table.
You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.
On which server should you install IPAM?
A. DC1
B. DC2
C. DC3
D. Server1
Answer: D
Explanation:
Explanaton: IPAM cannot be installed on Domain Controllers. All servers, except Server1, have the DC role
Reference: IP Address Management (IPAM) Overview http://technet.microsoft.com/en-us/library/hh831353.aspx
Q12. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. Cluster1 hosts 10 virtual machines. All of the virtual machines run Windows Server 2012 R2 and are members of the domain.
You need to ensure that the first time a service named Service1 fails on a virtual machine, the virtual machine is moved to a different node.
You configure Service1 to be monitored from Failover Cluster Manager.
What should you configure on the virtual machine?
A. From the Recovery settings of Service1, set the First failure recovery action to Take No Action.
B. From the General settings, modify the Startup type.
C. From the Recovery settings of Service1, set the First failure recovery action to Restart the Service.
D. From the General settings, modify the Service status.
Answer: A
Explanation:
When a monitored service fails the Recovery features of the service will take action.
Example:
Service Recovery
In this case for the first failure the service will be restarted by the Service Control Manager inside the guest operating system, if the service fails for a second time the service will again be restarted via guest operating system. In case of a third failure the Service Control Manager will take no action and the Cluster service running on the Hyper-V host will take over recovery actions.
Reference: How to configure VM Monitoring in Windows Server 2012
Q13. Your network contains two servers that run Windows Server 2012 R2 named Server1 and Server2. Both servers have the File Server role service installed.
On Server2, you create a share named Backups.
From Windows Server Backup on Server1, you schedule a full backup to run every night. You set the backup destination to \\Server2 \Backups.
After several weeks, you discover that \\Server2\Backups only contains the last backup that completed on Server1.
You need to ensure that multiple backups of Server1 are maintained.
What should you do?
A. Modify the Volume Shadow Copy Service (VSS) settings.
B. Modify the properties of the Windows Store Service (WSService) service.
C. Change the backup destination.
D. Configure the permission of the Backups share.
Answer: C
Explanation:
Explanation/Reference:
The destination in the exhibit shows a network share is used. If a network share is being
used only the latest copy will be saved.
Reference: Where should I save my backup?
http://windows.microsoft.com/en-us/windows7/where-should-i-save-my-backup
Q14. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed.
Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)
You need to assign a user named User1 permission to add and delete records from the contoso.com zone only.
What should you do first?
A. Enable the Advanced view from DNS Manager.
B. Add User1 to the DnsUpdateProxy group.
C. Run the New Delegation Wizard.
D. Configure the zone to be Active Directory-integrated.
Answer: D
Explanation:
Secure dynamic updates are only supported or configurable for resource records in zones that are stored in Active Directory Domain Services (AD DS).
Note: To modify security for a resource record
Open DNS Manager.
In the console tree, click the applicable zone.
In the details pane, click the record that you want to view.
On the Action menu, click Properties.
On the Security tab, modify the list of member users or groups that are allowed to
securely update the applicable record and reset their permissions as needed.
Reference: Modify Security for a Resource Record
Q15. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table.
An IP site link exits between each site.
You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB.
You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable.
What should you do?
A. Create an SMTP site link between SiteB and SiteC.
B. Create additional connection objects for DC3 and DC4.
C. Decrease the cost of the site link between SiteB and SiteC.
D. Create additional connection objects for DC1 and DC2.
Answer: C
Explanation:
By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteB rather than by SiteA.
Q16. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
Scope1, Scope2, and Scope3 are configured to assign the IP addresses of two DNS servers to DHCP clients. The remaining scopes are NOT configured to assign IP addresses of DNS servers to DHCP clients.
You need to ensure that only Scope1, Scope3, and Scopes assign the IP addresses of the DNS servers to the DHCP clients. The solution must minimize administrative effort.
What should you do?
A. Create a superscope and a filter.
B. Create a superscope and scope-level policies.
C. Configure the Server Options.
D. Configure the Scope Options.
Answer: D
Explanation:
Scope options are applied to any clients that obtain a lease within that particular scope.
Active scope option types always apply to all computers obtaining a lease in a given scope
unless they are overridden by class or reserved client settings for the option type.
Incorrect:
Not A, not B. A superscope allows a DHCP server to provide leases from more than one
scope to clients on a single physical network. It is not applicable here.
Not C. If we configure the Server Options and set the DNS Servers then all DHCP clients
would be assigned a DNS server.
Reference: Managing DHCP Options
https://technet.microsoft.com/en-us/library/cc958929.aspx