Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. OTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Hyper-V server role installed. The servers are configured as shown in the following table.
You add a third server named Server3 to the network. Server3 has Intel processors.
You need to move VM3 and VM6 to Server3. The solution must minimize downtime on the virtual machines.
Which method should you use to move each virtual machine?
To answer, select the appropriate method for each virtual machine in the answer area.
Answer:
Q2. You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The imagex.exe command
B. The ocsetup.exe command
C. The setup.exe command
D. The dism.exe command
Answer: D
Explanation: The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt
Q3. OTSPOT
You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter.
From Windows PowerShell, you run the following command:
Remove-WindowsFeature Server-Gui-Shell.
In the table below, identify which tools are available on Server1 and which tools are
unavailable on Server1.
Make only one selection in each row. Each correct selection is worth one point.
Answer:
Q4. You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter. You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?
A. An online servicing by using Dism
B. An offline servicing by using Dism
C. An upgrade installation of Windows Server 2012 R2
D. A clean installation of Windows Server 2012 R2
Answer: A
Explanation:
A. Not least effort
B. Not least effort
C. dism /online /set-edition
D. offline would be less ideal and more workex: DISM /online /Set-Edition:ServerEnterprise / ProductKey:489J6-VHDMP-X63PK-3K798-CPX3YWindows Server 2008 R2/2012 contains a command-line utility called DISM (Deployment Image Servicing andManagement tool). This tool has many features, but one of those features is the ability to upgrade the edition ofWindows in use. Note that this process is for upgrades only and is irreversible. You cannot set a Windowsimage to a lower edition. The lowest edition will not appear when you run the /Get-TargetEditions option. If the server is running an evaluation version of Windows Server 2012 R2 Standard or Windows Server 2012 R2Datacenter, you can convert it to a retail version as follows: If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additionaldomain controller on a server that runs a retail version and remove AD DS from the domain controller thatruns on the evaluation version. From an elevated command prompt, determine the current edition name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXXXXXXX-XXXXX-XXXXXXXXXX /AcceptEula,providing the edition ID and a retail product key. The server will restart twice. http://technet.microsoft.com/en-us/library/jj574204.aspx http://technet.microsoft.com/en-us/library/dd744380%28v=ws.10%29.aspx http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading- windows-server2008-r2- without-media.aspx http://communities.vmware.com/people/vmroyale/blog/2012/05/30/howto-
upgradingwindows- edition-with-dism
Q5. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM "Server2" | Set-VMNetworkAdapter -IovWeight 1
B. Get-VM "Server1" | Set-VMNetworkAdapter -Allow/Teaming On
C. Get-VM "Server1" | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM "Server2" | Set-VMNetworkAdapter -PortMirroring Destination
E. Get-VM "Server1" | Set-VMNetworkAdapter -IovWeight 0
F. Get-VM "Server2” | Set-VMNetworkAdapter-AllowTeaming On
Answer: C,D
Explanation: Note:
*
Get-VM will get the virtual machines from one or more Hyper-V hosts.
-ComputerName<String[]> is used to specify one or more Hyper-V hosts from which virtual machines are to be retrieved. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer — use “localhost” or a dot (“.”) to specify the local computer explicitly.
*
Set-VMNetworkAdapter is used to configure features of the virtual network adapter in a virtual machine or the management operating system.
-PortMirroring<VMNetworkAdapterPortMirroringMode> is used to specify the port mirroring mode for the network adapter to be configured.
With Port Mirroring, traffic sent to or from a Hyper-V Virtual Switch port is copied and sent to a mirror port. There are a range of applications for port mirroring - an entire ecosystem of network visibility companies exist that have products designed to consume port mirror data for performance management, security analysis, and network diagnostics. With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic.
References: http://technet.microsoft.com/en-us/library/jj679878.aspx
Q6. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012.
The domain contains an Edge Server named Server1. Server1 is configured as a DirectAccess server. Server1 has the following settings:
Internal DNS name: Server1.contoso.com External DNS name: dal.contoso.com Internal IPv6 address: 2002:cla8:6a:3333::l External IPv4 address: 65.55.37.62
Your company uses split-brain DNS for the contoso.com zone.
You run the Remote Access Setup wizard as shown in the following exhibit. (Click the Exhibit button.)
...
You need to ensure that client computers on the Internet can establish DirectAccess connections to Server1.
Which additional name suffix entry should you add from the Remote Access Setup wizard?
A. A Name Suffix value of Server1.contoso.com and a blank DNS Server Address value
B. A Name Suffix value of dal.contoso.com and a blank DNS Server Address value
C. A Name Suffix value of Server1.contoso.com and a DNS Server Address value of
65.55.37.62
D. A Name Suffix value of dal.contoso.com and a DNS Server Address value of
65.55.37.62
Answer: A
Explanation:
*
In a non-split-brain DNS environment, the Internet namespace is different from the intranet namespace. For example, the Contoso Corporation uses contoso.com on the Internet and corp.contoso.com on the intranet. Because all intranet resources use the corp.contoso.com DNS suffix, the NRPT rule for corp.contoso.com routes all DNS name queries for intranet resources to intranet DNS servers. DNS name queries for names with the contoso.com suffix do not match the corp.contoso.com intranet namespace rule in the NRPT and are sent to Internet DNS servers.
*
Split-brain DNS is a configuration method that enables proper resolution of names (e.g., example.com) from both inside and outside of your local network.
Note: For split-brain DNS deployments, you must list the FQDNs that are duplicated on the Internet and intranet and decide which resources the DirectAccess client should reach, the intranet version or the public (Internet) version. For each name that corresponds to a resource for which you want DirectAccess clients to reach the public version, you must add the corresponding FQDN as an exemption rule to the NRPT for your DirectAccess clients. Name suffixes that do not have corresponding DNS servers are treated as exemptions.
Reference: Design Your DNS Infrastructure for DirectAccess
Q7. You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10 shared printers.
You need to change the location of the spool folder.What should you modify?
A. The properties of the Print Spooler service
B. The Print Server Properties
C. The user environment variables
D. The PrintQueue.inf file
Answer: A
Q8. Your network contains a perimeter network and an internal network. The internal network contains an Active Directory Federation Services (AD FS) 2.1 infrastructure. The infrastructure uses Active Directory as the attribute store.
You plan to deploy a federation server proxy to a server named Server2 in the perimeter network.
You need to identify which value must be included in the certificate that is deployed to Server2.
What should you identify?
A. The name of the Federation Service
B. The name of the Active Directory domain
C. The FQDN of the AD FS server
D. The public IP address of Server2
Answer: C
Explanation:
A. It must contain the FQDN http://technet.microsoft.com/en-us/library/cc776786(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc782620(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc759635(v=ws.10).aspx
Q9. RAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1. All servers in the domain run Windows Server 2012 R2.
You need to create a new volume on File1.
The new volume must have the following configurations:
Have the drive letter T
Have the FAT32 file system
Be stored on a new virtual hard disk
In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
...
Answer:
Q10. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the IP Address Management (IPAM) Server feature installed. Server2 has the DHCP Server server role installed. A user named User1 is a member of the IPAM Users group on Server1. You need to ensure that User1 can use IPAM to modify the DHCP scopes on Server2. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?
A. IPAM ASM Administrators on Server1
B. IPAMUG in Active Directory
C. DHCP Administrators on Server2
D. IPAM MSM Administrators on Server1
Answer: C
Explanation:
Sever2 "DHCP Users" group membership is required to modify scopes on Server2 of course DHCP Administrators can proceed these tasks too. From the MSPress book "Upgrading your skills to MCSA Windows Server 2012 R2" IPAM Provisioning IPAM installation sets up various periodic data collection tasks to collect relevant data from managed DNS, DHCP, DC and NPS servers to enable address space management, multiserver management and monitoring and event catalog scenarios. All IPAM tasks launch under the Network Service account, which presents the local computer's credentials to remote servers. To accomplish this, administrators must enable read access and security permissions for the required resources over managed servers for the IPAM server's computer account. Further the relevant firewall ports need to be configured on these managed servers. IPAM Access Settings The following table provides a mapping of the IPAM functionality and managed server role type to access setting and FW rule required by IPAM periodic tasks
IPAM Access Monitoring IPAM access monitoring tracks the provisioning state of the following statuses on the server roles, which are displayed in the details pane of the IPAM server inventory view
Q11. Server manager is a great tool for managing most of your server settings and configuration all in one central place. Which one of the following Server manager Features is used for management of Public Key Infrastructure?
A. Dynamic Host Configuration Server
B. WINS Server
C. Domain Name Service
D. Active Directory Certificate Services
Answer: D
Q12. OTSPOT
Your network contains an Active Directory domain named contoso.com.
You have a failover cluster named Cluster1 that contains two nodes named Server1 and Server2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed.
You plan to create two virtual machines that will run an application named App1. App1 will store data on a virtual hard drive named App1data.vhdx. App1data.vhdx will be shared by both virtual machines.
The network contains the following shared folders:
An SMB file share named Share1 that is hosted on a Scale-Out File Server. An SMB file share named Share2 that is hosted on a standalone file server. An NFS share named Share3 that is hosted on a standalone file server.
You need to ensure that both virtual machines can use App1data.vhdx simultaneously.
What should you do?
To answer, select the appropriate configurations in the answer area.
...
Answer:
Q13. OTSPOT
The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit.(Click the Exhibit button.)
The settings for Disk1.vhdx are configured as shown in the Disk1.vhdx exhibit. (Click the Exhibit button.)
The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit.(Click the Exhibit button.)
Select Yes if the statement can be shown to be true based on the available information; otherwise select No.Each correct selection is worth one point.
Answer:
Q14. Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and childl.contoso.com.
The domains contain three domain controllers.
The domain controllers are configured as shown in the following table.
You need to ensure that the KDC support for claims, compound authentication, and
Kerberos armoring setting is enforced in both domains.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. Raise the domain functional level of contoso.com.
B. Raise the domain functional level ofchildl.contoso.com
C. Raise the forest functional level of contoso.com
D. Upgrade DC11 to Windows Server 2012 R2
E. Upgrade DC1 to Windows Server 2012 R2
Answer: A,E
Q15. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP
Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP clients. The solution must minimize administrative effort.
What should you do?
A. Create a superscope and a filter.
B. Create a superscope and scope-level policies.
C. Configure the Server Options.
D. Configure the Scope Options.
Answer: D