Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. All domain controllers run Windows Server 2012 R2 and are configured as global catalog servers.
The corp.contoso.com domain contains a domain controller named DC1.
You need to disable the global catalog on DC1.
What should you do?
A. From Active Directory Users and Computers, modify the properties of the DC1 computer account.
B. From Active Directory Administrative Center, modify the properties of the DC1 computer account.
C. From Active Directory Domains and Trusts, modify the properties of the corp.contoso.com domain.
D. From Active Directory Sites and Services, modify the NTDS Settings of the DC1 server object.
Answer: D
Explanation:
When you navigate your way to the Active Directory Sites and Services\Sites\SiteName\Servers then in the details pane, right-click NTDS Settings of the selected server object, and then click Properties. There will you get access to the Global Catalog check box to add the global catalog, or clear the check box to remove the global catalog.
References: http://technet.microsoft.com/en-us/library/cc755257.aspx
Q2. Virtual Network Manager (available from the Hyper-V Manager snap-in) offers three types of virtual networks that you can use to define various networking topologies for virtual machines and the virtualization server.
Which type of virtual network is isolated from all external network traffic on the virtualization server, as well any network traffic between the management operating system and the external network.
A. Internal virtual network
B. Private virtual network
C. External virtual network
D. None of these
Answer: B
Q3. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You plan to create a snapshot of VM1.
You need to recommend a solution to minimize the amount of disk space used for the snapshot of VM1.
What should you do before you create the checkpoint?
A. Run the Stop-VM cmdlet.
B. Convert diskl.vhd to a dynamically expanding disk.
C. Configure VM1 to have a smaller virtual disk.
D. Decrease the Minimum RAM.
Answer: A
Explanation:
For checkpoints created when the virtual machine is stopped
The checkpoint contains the state of the hard disks only.
For checkpoints created when the virtual machine is running
The checkpoint contains the state of the hard disks and the data in memory.
Note: A checkpoint saves the state of each virtual hard disk that is attached to a virtual
machine and all of the hard disk's contents, including application data files. For virtual
machines on Hyper-V and VMware ESX Server hosts, a checkpoint also saves the
hardware configuration information. By creating checkpoints for a virtual machine, you can
restore the virtual machine to a previous state.
Q4. You have 20 servers that run Windows Server 2012 R2.
You need to create a Windows PowerShell script that registers each server in Microsoft Azure Backup and sets an encryption passphrase.
Which two PowerShell cmdlets should you run in the script? (Each correct answer presents part of the solution. Choose two.)
A. Set-OBMachineSetting
B. Add-OBFileSpec
C. Start-OBRegistration
D. New OBPolicy
E. New-OBRetentionPolicy
Answer: A,C
Explanation:
D: Start-OBRegistration Registers the current computer with Windows Azure Online Backup using the credentials (username and password) created during enrollment.
E: The Set-OBMachineSettingcmdlet sets aOBMachineSetting object for the server that includes proxy server settings for accessing the internet, network bandwidth throttling settings, and the encryption passphrase that is required to decrypt the files during recovery to another server. Incorrect: Not C: TheAdd-OBFileSpeccmdlet adds theOBFileSpecobject, which specifies the items to include or exclude from a backup, to the backup policy (OBPolicyobject). TheOBFileSpecobject can include or exclude multiple files, folders, or volumes. T http://technet.microsoft.com/en-us/library/hh770416(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh770425(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh770424.aspx http://technet.microsoft.com/en-us/library/hh770398.aspx http://technet.microsoft.com/en-us/library/hh770409.aspx
Q5. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1.
What should you do first?
A. From a command prompt on Server2/ run winrm.exe.
B. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.
C. From Server Manager on Server2, enable Windows Remote Management.
D. From Windows PowerShell on Server1, run Install-WindowsFeature.
Answer: C
Q6. RAG DROP
Your network contains a single Active Directory domain named contoso.com. The domain contains an Active Directory site named Site1 and an organizational unit (OU) named OU1.
The domain contains a client computer named Client1 that is located in OU1 and Site1.
You create five Group Policy objects (GPO). The GPOs are configured as shown in the following table.
You need to identify in which order the GPOs will be applied to Client1.
In which order should you arrange the listed GPOs?
To answer, move all GPOs from the list of GPOs to the answer area and arrange them in
the correct order.
Answer:
Q7. You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The imagex.exe command
B. The ocsetup.exe command
C. The setup.exe command
D. The dism.exe command
Answer: D
Explanation: The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt
Q8. Your network contains an Active Directory domain named contoso.com. The domain
contains a file server named File1 that runs a Server Core Installation of Windows Server 2012 R2.
File1 has a volume named D that contains home folders. File1 creates a shadow copy of volume D twice a day.
You discover that volume D is almost full.
You add a new volume named H to File1.
You need to ensure that the shadow copies of volume D are stored on volume H.
Which command should you run?
A. The Set-Volume cmdlet with the -driveletter parameter
B. The vssadmin.exe create shadow command
C. The Set-Volume cmdlet with the -path parameter
D. The vssadmin.exe add shadowstorage command
Answer: D
Explanation:
A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a letter used to identify a drive or volume in the system.
B. Displays current volume shadow copy backups and all installed shadow copy writers and providers. Shadow Creates a new shadow copy of a specified volume.
C. Sets or changes the file system label of an existing volume -Path Contains valid path information.
D. Displays current volume shadow copy backups and all installed shadow copy writers and providers. AddShadowStroage Adds a shadow copy storage association for a specified volume. http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx
Q9. Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012 R2.
You need to create a custom Active Directory application partition.
Which tool should you use?
A. Eseutil
B. Dsadd
C. Dsmod
D. Ntdsutil
Answer: D
Explanation:
*
To create or delete an application directory partition Open Command Prompt. Type:ntdsutil At the ntdsutil command prompt, type:domain management At the domain management command prompt, type:connection At the server connections command prompt, type:connect to server ServerName At the server connections command prompt, type:quit At the domain management command prompt, do one of the following:
*
partition management Manages directory partitions for Active Directory Domain Services (AD DS) or Active Directory Lightweight Directory Services (AD LDS). This is a subcommand of Ntdsutil and Dsmgmt. Ntdsutil and Dsmgmt are command-line tools that are built into Windows Server 2008 and Windows Server 2008 R2. / partition management create nc %s1 %s2 Creates the application directory partition with distinguished name %s1, on the Active Directory domain controller or AD LDS instance with full DNS name %s2. If you specify "NULL" for %s2, this command uses the currently connected Active Directory domain controller. Use this command only with AD DS. For AD LDS, use createnc %s1 %s2 %s3.
Note:
*
An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain controller that participates in the replication of a particular
.......
application directory partition hosts a replica of that partition.
Q10. You have a server named Server1 that runs Windows Server 2012 R2.
You create a custom Data Collector Set (DCS) named DCS1.
You need to configure Server1 to start DCS1 automatically when the network usage
exceeds 70 percent.
Which type of data collector should you create?
A. A performance counter alert
B. A performance counter data collector
C. An event trace data collector
D. A configuration data collector
Answer: A
Q11. Your network contain an active directory domain named Contoso.com. The domain contains two servers named server1 and server2 that run Windows Server 2012 R2. You create a security template named template1 by using the security template snap-in. You need to apply template1 to server2.
Which tool should you use?
A. Security Configuration and Analysis
B. Server Manager
C. Security Template
D. Computer management
Answer: A
Q12. Which terminology is being described below?
A _________ trust allows resources in your domain (the domain that you are logged on to at the time that you run the New Trust Wizard) to be accessed more quickly by users in another domain (which is nested within another domain tree) in your forest.
A. one-way, outgoing, shortcut
B. two-way, incoming, shortcut
C. one-way, outgoing, forest
D. two-way, incoming, forest
Answer: A
Explanation:
The direction of the trust is inverse of the direction of the authorization not forest as we're asked for a trust only between 2 domains. a forest trust would provide trust between every single domain of the forest.
Q13. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the Hyper-V server role installed.
You plan to replicate virtual machines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer (SSL).
You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.
Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part of the solution. Choose two.)
A. Client Authentication
B. Kernel Mode Code Signing
C. Server Authentication
D. IP Security end system
E. KDC Authentication
Answer: A,C
Explanation:
http://blogs.technet.com/b/virtualization/archive/2012/03/13/hyper-v-replica-certificaterequirements.aspx
Q14. A server named Server01 is running Server Core at your companies IT house. It is already configured with the AD DS role but you also want to add AD CS to the server. What must you do to add Active Directory Certificate Services (AD CS) to this server?
A. Reinstall the server with the full version of Windows Server 2008
B. Install the AD CS role
C. Install the RODC role
D. Install the AD FS role
Answer: B Explanation:
Server 2012 allows AD CS in core mode. http://technet.microsoft.com/en-us/library/hh831373.aspx What's New in AD CS? New and changed functionality Several new capabilities are available in the Windows Server 2012 R2 version of AD CS. They include: Integration with Server Manager Deployment and management capabilities from Windows PowerShell?All AD CS role services run on any Windows Server 2012 R2 version All AD CS role services can be run on Server Core Support for automatic renewal of certificates for non-domain joined computers Enforcement of certificate renewal with same key Support for international domain names Increased security enabled by default on the CA role service AD DS Site Awareness for AD CS and PKI Clients
Q15. Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain. You need to ensure that you can view processor usage and memory usage information in
Server Manager. What should you do?
A. From Server Manager, click Configure Performance Alerts.
B. From Performance Monitor, create a Data Collector Set (DCS).
C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
D. From Server Manager, click Start Performance Counters.
Answer: D
Explanation: You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored. References: http://technet.microsoft.com/en-us/library/bb734903.aspx