Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2021.
You plan to create a Network load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be on the same subnet and lo have dynamic
IP addresses. You configure the cluster to use multicast. Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation: References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network- load-balancing
Q2. You have a server named Server1 that runs Windows Server 2021. The Windows Server 2021 installation media is mounted as drive D.
You copy the NanoServerImageGenerator folder from the D:\NanoServer folder to the C:\NanoServer folder.
You need to create a custom Nano Server image that includes the Hyper-V server role. The image will be used to deploy Nano Servers to physical servers.
Which two commands should you run? Each correct answer presents part of the solution.
A. New-NanoServerImage –Edition Standard –DeploymentType Guest –MediaPath D:\ - TargetPath .\NanoServerImage\NanoServer.wim –Compute
B. Install-PackageProvider NanoServerPackage
C. Import-PackageProvider NanoServerPackage
D. New-NanoServerImage –Edition Standard –DeploymentType Host –MediaPath D:\ - TargetPath .\NanoServerImage\NanoServer.wim –Compute
E. Import-Module C:\NanoServer\NanoServerImageGenerator
Answer: D,E
Q3. Your company has 10 offices. Each office has a local network that contains several Hyper- V hosts that run Windows Server 2021. All of the offices are connected by high speed, low
latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices.
Which component should you install?
A. the Multipath I/O feature
B. the Routing role service
C. the Network Controller server role
D. the Canary Network Diagnostics feature
E. the Data Center Bridging feature
Answer: C,E
Q4. You have a server named Server1 that runs Windows Server 2021. You need to install the DNS Server role on Server1. What should you run?
A. the dns.exe command
B. the optionalfcaturcs.exe command
C. the Install-Package cmdlet
D. the Enable-WindowsOptionalFeature cmdlet
Answer: D
Q5. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1. Server2. Server3. and Server4 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed Server2, Server3, and Server4 have the DHCP Server rote instated IPAM manages Server2. Server3, and Server4.
A domain user named User1 is a member of the groups shown in the following table
Answer:
Q6. HOTSPOT
Your network contains an Active Directory domain named contoso com. The domain contains a member server named Server1 that runs Windows Server
2021.
You install IP Address Management (IPAM) on Server! You select the automatic provisioning method, and then you specify a prefix of IPAM!
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
Q7. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2021.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be on the same subnet and to have static IP
addresses. You configure the cluster to use multicast. Does this meet the goal?
A. Yes
B. No
Answer: A
Explanation: References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network- load-balancing
Q8. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory.
Solution: You create a performance counter alert data collector. Does this meet the goal?
A. Yes
B. No
Answer: A
Q9. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 As virtual machine named VM1 runs on Cluster1
You need to configure monitoring of VM1 The solution must move VM1 to a different node
if the Print Spooler service on VM1 stops unexpectedly Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: F
Q10. Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows:
• E ach virtual machine has one virtual network adapter
• VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
• All of the servers on the network can communicate with all of the virtual machines.
End of repeated Scenario.
You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
What should you do?
A. Configure the virtual machines as shielded virtual machines.
B. Run the Set-VMProcessor cmdlet and specify the –EnableHostResourceProtection Parameter.
C. Run the Set-VMProcessor cmdlet and specify the –MaximumCountPerNumaNode Parameter.
D. Configure VM Network Adapter Isolation.
Answer: B
Q11. HOTSPOT
You implement a Windows Server 2021 failover cluster named Cluster1 as a highly available file server.
You run the Get-Cluster cmdlet and receive the following output.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Answer:
Q12. Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?
A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
B. install the Failover Clustering feature and create a new cluster resource group.
C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter
Answer: A
Q13. HOTSPOT
You have a server that runs Windows Server 2021. You run the commands shown in the following output PS G:\> Get-DedupVolume | f1
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Q14. HOTSPOT
You have a server named Server1 that runs Windows Server 2021 server.
Server1 has the Docker daemon configured and has a container named Container1.
You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1. Which command should you run? To answer, select the appropriate options in the answer
area.
Answer:
Q15. Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2021 Hyper-V environment configured as shown in the following table.
All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host3 and Host4. Does this meet the goal?
A. Yes
B. No
Answer: A
Q16. You have an Active Directory domain named Contoso com The domain contains servers named Server1 and Server2 that run Windows Server 2021. You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?
A. From Routing and Remote Access, configure the authentication provider.
B. From the Connection Manager Administration Kit, create a Connection Manager profile
C. From Server Manager, create an Access Policy.
D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
Answer: A
Q17. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients
Solution From the Security setting of each zone on Server1, you modify the permissions Does this meet the goal?
A. Yes
B. No
Answer: B