Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
It is impossible to pass Microsoft 70-741 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed 70-741 exam. You will get a surprising result by our 70-741 exam.
Free demo questions for Microsoft 70-741 Exam Dumps Below:
NEW QUESTION 1
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2021. IPAM1 manages 10 DHCP servers.
You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges.
Answer: C
Explanation: References: https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx
NEW QUESTION 2
Your network contains an Active Directory forest named contoso.com. The functional level of the forest is Windows Server 2012.
The forest contains five domain controllers and five VPN servers that run Windows Server 2021. Five hundred users connect to the VPN servers daily.
You need to configure a new server named Server1 as a RADIUS server. What should you do first?
Answer: B
Explanation: http://www.nyazit.com/configure-network-policy-server-2021/
NEW QUESTION 3
You are configuring internal virtual networks to support multitenancy communication between tenant virtual machine networks and remote sites.
You have a tenant named Tenant1.
You need to enable Border Gateway Protocol (BGP) for Tenant1.
Which commands should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 4
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.
A domain user named User1 is a member of the groups shown in the following table.
On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the Global access scope to the user.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Explanation: https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx
NEW QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
Answer: A
NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host. You run the commands shown in the following graphic:
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Answer:
Explanation: 
NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You install the Remote Access Serverrole on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
Answer: A
NEW QUESTION 8
Your company has five departments, including a web research department.
You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution.
You need to ensure that users in the web research department use DNS2 for name resolution.
Answer: A
NEW QUESTION 9
You have a server named Server1 that runs Windows Server 2021 and is configured as a domain controller.
You install the DNS Server server role on Server1.
You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?
Answer: B
Explanation: References:
https://www.businessnewsdaily.com/11019-set-up-configure-dns-on-windows-server-2021.html
NEW QUESTION 10
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of the repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
End of the repeated scenario
You need to ensure that when computers query for records in tailspintoys.com, the query results are based on the subnet of the computer that generates the query.
What should you do?
Answer: B
NEW QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation: References:
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx
NEW QUESTION 12
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
Answer:
Explanation: 
NEW QUESTION 13
You have a server named Server1 that runs Windows Server 2021. Server1 is located on the perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet.
You install the Remote Access server role on Server1.
You need to configure Server1 to accept VPN connections over port 443.
Which VPN protocol should you use?
Answer: B
Explanation: https://technet.microsoft.com/en-us/library/dd458955(v=ws.10).aspx
NEW QUESTION 14
You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2021. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Server Manager, you run Retrieve Event Catalog Data. Does this meet the goal?
Answer: A
Explanation: References:
http://www.techblogopedia.com/blog/ip-address-managementipam-windows-server-2012-r2-part-3/
NEW QUESTION 15
You have a DHCP server named Server1 that runs Windows Server 2021. Server1 has the scopes configured as shown in the following table.
All other scope settings are set to the default values. There is no available address space for another scope to be created.
Your network has 150 desktop computers that have access to the corporate network. Your company also provides visitors with WI-FI access to the network. There can be up to 200 visitors each day.
You discover that some visitors fail to access the WI-FI network because there are no available addresses to allocate to the visitors.
You need to prevent this issue from reoccurring. What should you do?
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/previous-versions/windows/desktop/dhcpserverpsprov/dhcpserverv4scope
NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package Microsoft-NanoServerCompute-Package -MediaPath ‘D:’ -TargetPath C:Nano1Nano1.wim -ComputerName Nano1 -DomainName Contoso.com Does this meet the goal?
Answer: A
NEW QUESTION 17
You have a server named Server1 that runs Windows Server 2021. Server1 is in a workgroup and has the DNS Server role installed. You need to enable DNS analytical diagnostic logging on Server1. What should you do?
Answer: E
Explanation: References:
https://www.yourdigitalmind.com/tutorials/how-to-enable-dns-logging-and-diagnostics-in-windows-server-2012
NEW QUESTION 18
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of the repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
End of the repeated scenario
You need to configure an administrator named admin@fabrikam.com as the contact person for the fabrikam.com zone.
What should you modify? To answer, select the appropriate options in the answer area.
Answer:
Explanation: References: https://www.microsoftpressstore.com/articles/article.aspx?p=2756482&seqNum=2
NEW QUESTION 19
You have a server named Server1 that runs Windows Server 2021. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?
Answer: C
NEW QUESTION 20
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: On Server1, you open Hyper-V Manager and view the Integration Services settings of VM1.
Does this meet the goal?
Answer: B
100% Valid and Newest Version 70-741 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/70-741-dumps.html (New 235 Q&As)