Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Your network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Federation Services (AD FS) farm.
You install Windows Server 2021 on a server named Server2
You need to configure Server2 as a node in the federation server farm
Which cmdlets should you run? To answer, select the appropriate options in the answer area
Answer:
Q2. Your network contains an Active Directory forest The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers Site1 and Site2 connect to each other by using a WAN link
You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.
Server3 is the only server in Site2
Use the drop-down menus to select the answer choice that completes each statement based on the information graphic.
Answer:
Q3. You have a server named Server1 that runs Windows Server 2021 Server1 has the Web Application Proxy role service installed
You publish an application named App1 by using the Web Application Proxy.
You need to change the URL that users use to connect to App1 when they work remotely. Which command should you run? To answer, select the appropriate options in the answer area
Answer:
Q4. You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
Q5. Your network contains an Active Directory forest The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole PDCEmulator Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole RIDMaster DC1 fails.
You remove DC1 from the network, and then you run the following command:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole SchemaMaster
For each of the following statements, select Yes if the statement is true. Otherwise, select No
Answer:
Q6. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have two servers named Server1 and Server2 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed
An iSCSI SAN connects to the network
You create a LUN on the SAN and configure both servers to connect to the iSCSI target
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage
You need to add the shared storage to the cluster The solution must ensure that virtual machines running on both nodes can access the shared storage
simultaneously.
Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: F
Q7. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to support the planned deployment.
Solution You raise the forest functional level to Windows Server 2012R2. Does this meet the goal?
A. Yes
B. No
Answer: A
Q8. Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?
A. the Multipath I/O feature
B. the Routing role service
C. the Network Controller server role
D. the Canary Network Diagnostics feature
E. the Data Center Bridging feature
Answer: CE
Q9. Your network contains an Active Directory domain named contoso com. The domain contains a member server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server! You select the automatic provisioning method, and then you specify a prefix of IPAM!
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
Q10. You have a failover cluster named Cluster!
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1 A custom application named App1 runs on VM1.
You need to configure monitoring of VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node
Which tool should you use?
A. Hyper-V Manager
B. Failover Cluster Manager
C. Server Manager
D. Resource Monitor
Answer: B
Q11. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to support the planned deployment. Solution You raise the domain functional level to Windows Server 2012R2.
Does this meet the goal?
A. Yes
B. No
Answer: B
Q12. Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?
A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
B. install the Failover Clustering feature and create a new cluster resource group.
C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter
Answer: A
Q13. Your network contains an Active Directory domain named contoso.com The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed Server2 has IP Address Management lPAM installed The IPAM server retrieves zones from Server1 as shown in
the following table
Answer:
Q14. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 You plan to deploy several shielded virtual machines on Server1
You deploy a Host Guardian on a new server
You need to ensure that Server1 can host shielded virtual machines. What should you run first?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: G
Q15. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have three servers named Server1, Server2. Server3 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed Server^ has the iSCSI Target Server role service installed
You need to create a Hyper-V cluster Which tool should you use first?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: H
Q16. You have a server named Server1 that runs Windows Server 2021 Server1 has the Web Application Proxy role service installed
You publish an application named App1 by using the Web Application Proxy.
You need to change the URL that users use to connect to App1 when they work remotely. Which command should you run? To answer, select the appropriate options in the answer area
Answer:
Q17. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to support the planned deployment.
Solution You raise the forest functional level to Windows Server 2012R2. Does this meet the goal?
A. Yes
B. No
Answer: A
Q18. Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?
A. the Multipath I/O feature
B. the Routing role service
C. the Network Controller server role
D. the Canary Network Diagnostics feature
E. the Data Center Bridging feature
Answer: CE
Q19. Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: F
Q20. You need to modify the GPO prefix by IPAM. What should you do?
A. Run theSet-lpamConfigurationcmdlet
B. ClickProvision the IPAM serverin Server Manager.
C. ClickConfigure server discoveryin Server Manager.
D. Run thelnvoke-lpamGpoProvisioningcmdlet
Answer: A
Q21. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space.
You need to reduce the amount of disk space used by the VHD. What should you run?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: H