Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. You have a server named Server1 that runs Windows Server 2021.
You plan to deploy Internet Information Services (US) in a Windows container. You need to prepare Server1 for the planned deployment
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order
Answer:
Q2. Your company has a testing environment that contains an Active Directory domain named contoso com The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.
For each of the following statements, select Yes if the statement is true Otherwise, select No
Answer:
Q3. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper-V host named Server1 at a secondary location
A virtual machine named VM1 runs on Cluster1
You configure a Hyper-V Replica of VM1 to Server1 You need to perform a Test Fai lover of VM1. Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: G
Q4. You have a Nano Server named Nano1.
Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?
A. Find-NanoServerPackage
B. Get-Package
C. Find-Package
D. Get-WindowsOptionalFeature
Answer: B
Q5. Your network contains an Active Directory forest The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole PDCEmulator Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole RIDMaster DC1 fails.
You remove DC1 from the network, and then you run the following command:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole SchemaMaster
For each of the following statements, select Yes if the statement is true. Otherwise, select No
Answer:
Q6. Your network contains an Active Directory domain named contoso com. The domain contains a member server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server! You select the automatic provisioning method, and then you specify a prefix of IPAM!
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
Q7. You have a server named Server1 that runs Windows Server 2021. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?
A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on Server1, run theSet-VmSwitchcmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From the properties of the NIC team on VM1. change the load balancing of the NIC team.
Answer: A
Q8. You have a server named Server 1 that runs Windows Server 2021 The disk configuration for Served is shown in the exhibit
You add Server1 to a cluster
You need to ensure that you can use Disk1 (or Storage Spaces Direct What should you do first?
A. Delete Partition (E:)
B. Set Disk1 to offline.
C. Convert Disk 1 to a dynamic disk
D. Convert Partition (E:) to ReFS
Answer: A
Q9. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?
A. Yes
B. No
Answer: A
Q10. Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?
A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
B. install the Failover Clustering feature and create a new cluster resource group.
C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter
Answer: A
Q11. You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
Q12. You have a server named Server 1 that runs Windows Server 2021 The disk configuration for Served is shown in the exhibit
You add Server1 to a cluster
You need to ensure that you can use Disk1 (or Storage Spaces Direct What should you do first?
A. Delete Partition (E:)
B. Set Disk1 to offline.
C. Convert Disk 1 to a dynamic disk
D. Convert Partition (E:) to ReFS
Answer: A
Q13. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?
A. Yes
B. No
Answer: A
Q14. Your network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Federation Services (AD FS) farm.
You install Windows Server 2021 on a server named Server2
You need to configure Server2 as a node in the federation server farm
Which cmdlets should you run? To answer, select the appropriate options in the answer area
Answer:
Q15. You need to modify the GPO prefix by IPAM. What should you do?
A. Run theSet-lpamConfigurationcmdlet
B. ClickProvision the IPAM serverin Server Manager.
C. ClickConfigure server discoveryin Server Manager.
D. Run thelnvoke-lpamGpoProvisioningcmdlet
Answer: A
Q16. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to support the planned deployment. Solution You raise the domain functional level to Windows Server 2012R2.
Does this meet the goal?
A. Yes
B. No
Answer: B
Q17. You have a server named Server1 that runs Windows Server 2021. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?
A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on Server1, run theSet-VmSwitchcmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From the properties of the NIC team on VM1. change the load balancing of the NIC team.
Answer: A
Q18. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space.
You need to reduce the amount of disk space used by the VHD. What should you run?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: H
Q19. You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
Q20. Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1
You enable Response Rate Limiting on Server1.
You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which cmdlets should you run? To answer, select the appropriate options in the answer area
Answer:
Q21. Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1. Server2. Server3. and Server4 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed Server2, Server3, and Server4 have the DHCP Server rote instated IPAM manages Server2. Server3, and Server4.
A domain user named User1 is a member of the groups shown in the following table
Answer: