Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 9)
Your network contains an Active Directory forest named contoso.com.
You plan to automate the deployment of servers that run Windows Server 2012.
You identify the following requirements for the deployment:
Update the custom images that will be used for the deployment.
Add custom drivers to the images that will be used for the deployment.
Add software packages to the images that will be used for the deployment.
Perform a zero touch bare-metal installation that uses Wake On LAN.
A network consultant recommends using Windows Deployment Services (WDS) and the Windows Assessment and Deployment Kit (Windows ADK) to deploy the servers.
You need to identify which requirements are achieved by using the consultant's recommendations.
Which requirements should you identify? (Each correct answer presents part of the solution. Choose all that apply.)
A. Update the custom images used for the deployment.
B. Add software packages to the images used for the deployment.
C. Perform a zero touch bare-metal installation that uses Wake On LAN.
D. Add custom drivers to the images used for the deployment.
Answer: A,D
Q2. - (Topic 1)
You are planning the implementation of two new servers that will be configured as RADIUS servers.
You need to recommend which configuration must be performed on the VPN servers. The solution must meet the technical requirements.
What should you do on each VPN server?
A. Add a RADIUS client.
B. Install the Health Registration Authority role service.
C. Enable DirectAccess.
D. Modify the authentication provider.
Answer: D
Explanation:
D:\Documents and Settings\useralbo\Desktop\1.jpg
Q3. - (Topic 9)
Your network contains an Active Directory forest. The forest contains two Active Directory domains named contoso.com and child.contoso.com. The forest functional level is Windows Server 2003. The functional level of both domains is Windows Server 2008.
The forest contains three domain controllers. The domain controllers are configured as shown in the following table.
DC1 and DC2 have the DNS Server server role installed and are authoritative for both contoso.com and child.contoso.com.
The child.contoso.com domain contains a server named serverl.child.contoso.com that runs Windows Server 2012.
You plan to deploy server1.child.contoso.com as a read-only domain controller (RODC).
You run the adprep.exe /rodcprep command on DC3 and receive the following error message:
You need to identify what prevents you from successfully running Adprep /rodcprep on DC3.
What should you identify?
A. The domain functional level of child.contoso.com is set to the wrong level.
B. DC3 cannot connect to the infrastructure master on DC2.
C. DC3 cannot connect to the domain naming master on DC1.
D. The forest functional level is set to the wrong level.
Answer: B
Q4. - (Topic 1)
You are planning the decommissioning of research.contoso.com.
You need to ensure that an administrator named Admin5 in the research department can manage the user accounts that are migrated to contoso.com. The solution must minimize the number of permissions assigned to Admin5.
What should you do before you migrate the user accounts?
A. Run the New-Object cmdlet, and then run the Add-ADPrincipalGroupMembershipcmdlet.
B. Create a new organizational unit (OU), and then add Admin5 to the Account Operators group.
C. Create a new organizational unit (OU), and then run the Delegation of Control Wizard.
D. Run the New-Object cmdlet, and then run the Add-ADCentralAccessPolicyMembercmdlet.
Answer: C
Explanation:
D:\Documents and Settings\useralbo\Desktop\1.jpg http://technet.microsoft.com/en-us/library/dd145344.aspx
Q5. - (Topic 10)
Your network contains five servers that run Windows Server 2012 R2.
You install the Hyper-V server role on the servers. You create an external virtual network switch on each server.
You plan to deploy five virtual machines to each Hyper-V server. Each virtual machine will have a virtual network adapter that is connected to the external virtual network switch and that has a VLAN identifier of 1.
Each virtual machine will run Windows Server 2012 R2. All of the virtual machines will run the identical web application.
You plan to install the Network Load Balancing (NLB) feature on each virtual machine and join each virtual machine to an NLB cluster. The cluster will be configured to use unicast only.
You need to ensure that the NLB feature can distribute connections across all of the virtual machines.
Solution: On each Hyper-V server, you create a new external virtual network switch. From the properties of each virtual machine, you add a second virtual network adapter and connect the new virtual network adapters to the new external virtual network switches.
Does this meet the goal?
A. Yes
B. No
Answer: B
Q6. - (Topic 9)
Your network contains an Active Directory domain named contoso.com.
All client computers run either Windows 7 or Windows 8.
Some users work from customer locations, hotels, and remote sites. The remote sites often
have firewalls that limit connectivity to the Internet.
You need to recommend a VPN solution for the users.
Which protocol should you include in the recommendation?
A. PPTP
B. SSTP
C. IKEv2
D. L2TP/IPSec
Answer: B
Q7. - (Topic 1)
You are planning the migration of research.contoso.com.
You need to identify which tools must be used to perform the migration.
Which tools should you identify?
A. Active Directory Migration Tool version 3.2 (ADMT v3.2) and Group Policy Management Console (GPMC)
B. Active Directory Federation Services (AD FS) and Microsoft Federation Gateway
C. Active Directory Migration Tool version 3.2 (ADMT v3.2) and Active Directory Federation Services (AD FS)
D. Active Directory Lightweight Directory Services (AD LDS) and Group Policy Management Console (GPMC)
Answer: A
Explanation:
D:\Documents and Settings\useralbo\Desktop\1.jpg
D:\Documents and Settings\useralbo\Desktop\1.jpg
Topic 2, Proseware, Inc (A)
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24 network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts in the New York office reside in the proseware.com domain. All of the user accounts and the computer accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is 172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes: . Deploy a read-only domain controller (RODC) to the London office. . Give users remote access to both offices by using a VPN connection from their
laptop or tablet. . If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30 minutes.
. In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer (ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual machine storage.
. Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
. For legal reasons, the Montreal site will have its own forest named
montreal.proseware.com.
. The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure of their respective office. The London office will not have a local IT staff. Each office will have approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements: . Users in the Montreal office must only be allowed to access shares that are located on File01 and File02. The Montreal users must be prevented from accessing any other servers in the proseware.com forest regardless of the permissions on the resources, . Users in the New York office must be able to reconnect to the remote access VPN servers automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers. . Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be deployed to the proseware.com domain. . Administrators in the New York office must be able to restore objects from the Active Directory Recycle Bin. . The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in cache. . Each DNS server must be managed by an administrator from the same office as the DNS server. . The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized. . The remote access servers must be able to restrict outgoing traffic based on IP addresses. . All certificates must be deployed to all of the client computers by using auto-enrollment. . All of the DHCP Server server roles must be installed on a domain controller. . Only one DHCP server in each site must lease IP addresses at any given time. . DHCP traffic must not cross site boundaries. . RODCs must not contain personal user information.
Q8. HOTSPOT - (Topic 9)
Your network contains an Active Directory forest named contoso.com. The forest contains one domain. All domain controllers run Windows Server 2012. The functional level of the forest and the domain is Windows Server 2012.
The domain contains three domain controllers. The domain controllers are configured as shown in the following table.
In the forest, you plan to add a new domain controller that runs Windows Server 2012 R2.
You need to prepare the environment before you add the new domain controller.
Which domain controllers must be available to run each command? To answer, select the
appropriate domain controllers in the answer area.
Answer:
Q9. - (Topic 9)
Your network contains an Active Directory forest named contoso.com. The forest is managed by using Microsoft System Center 2012.
You plan to create virtual machine templates to deploy servers by using the Virtual Machine
Manager Self-service Portal (VMMSSP).
To the Virtual Machine Manager (VMM) library, you add a VHD that has a generalized image of Windows Server 2012.
You need to identify which VMM components must be associated with the image.
Which components should you identify? (Each correct answer presents part of the solution.
Choose all that apply.)
A. A guest OS profile
B. A hardware profile
C. A capability profile
D. A host profile
Answer: A,B
Explanation:
http://technet.microsoft.com/en-us/library/jj860424.aspx Profiles VMM provides the following profiles: Hardware profile—A hardware profile defines hardware configuration settings such as
CPU, memory, network adapters, a video adapter, a DVD drive, a floppy drive, COM ports,
and the priority given the virtual machine when allocating resources on a virtual machine
host.
Guest operating system profile—A guest operating system profile defines operating system
configured settings which will be applied to a virtual machine created from the template. It
defines common operating system settings such as the type of operating system, the
computer name, administrator password, domain name, product key, and time zone,
answer file and run once file.
NOTE: VMM also includes host profiles. Host profiles are not used for virtual machine
creation.
They are used during the conversion of a bare-metal computer to a Hyper-V host.
(http://technet.microsoft.com/en-us/library/hh368987.aspx)
Q10. - (Topic 3)
You need to recommend changes to the Active Directory environment to support the virtualization requirements.
What should you include in the recommendation?
A. Raise the functional level of the domain and the forest.
B. Upgrade the domain controller that has the domain naming master role to Windows Server 2012.
C. Implement Administrator Role Separation.
D. Upgrade the domain controllers that have the PDC emulator master role to Windows Server 2012.
Answer: D
Explanation: From case study:
* Ensure that the additional domain controllers for the branch offices can be deployed by using domain controller cloning.
Q11. HOTSPOT - (Topic 2)
You need to recommend a storage configuration for the Hyper-V hosts.
What should you recommend? To answer, select the appropriate options in the answer area.
Answer:
Q12. HOTSPOT - (Topic 10)
Your network contains five physical servers. The servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
During the setup of VMM, you configure distributed key management.
You need to ensure that the entire VMM infrastructure can be restored.
What should you include in the backup plan? To answer, select the appropriate server to
back up for each backup content type in the answer.
Answer:
Q13. DRAG DROP - (Topic 9)
Your network contains three servers named Server1, Server2, and Server3 that run Windows Server 2012. Server3 is connected to a disk storage array.
You need to ensure that Server1 can store files on the storage array. The solution must ensure that Server1 can access the storage as a local disk.
What should you configure on each server?
To answer, drag the appropriate configuration to the correct location in the answer area. Each configuration may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Answer:
Q14. - (Topic 9)
Your network contains an Active Directory domain named contoso.com.
Your company plans to open a branch office. The branch office will have 10 client computers that run Windows 8 and at least one server that runs Windows Server 2012. The server will host
BranchCache files and manage print queues for the network print devices in the branch office.
You need to recommend a solution to ensure that the users in the branch office can print if the branch office server fails.
What should you recommend?
More than one answer choice may achieve the goal. Select the BEST answer.
A. Printer pooling
B. Branch Office Direct Printing
C. A standby print server
D. A print server cluster
E. A secure Web Services on Devices (WSD) printer
Answer: B
Explanation:
http://technet.microsoft.com/en-us/library/jj134156.aspx Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. This feature requires a print server running Windows Server 2012 and clients running Windows
8. It is enabled by an administrator using the Print Management Console or Windows PowerShell on the server.
Q15. - (Topic 9)
Your company has three offices. The offices are located in New York, Chicago, and Atlanta.
The network contains an Active Directory domain named contoso.com that has three Active Directory sites named Site1, Site2,and Site3. The New York office is located in Site1. The Chicago office is located in Site2. The Atlanta office is located in Site3. There is a local IT staff to manage the servers in each site. The current domain controllers are configured as shown in the following table.
The company plans to open a fourth office in Montreal that will have a corresponding Active Directory site. Because of budget cuts, a local IT staff will not be established for the Montreal site.
The Montreal site has the following requirements:
. Users must be able to authenticate locally.
. Users must not have the ability to log on to the domain controllers.
. Domain account passwords must not be obtained from servers in the Montreal site.
. Network bandwidth between the Montreal site and the other sites must be minimized.
. Users in the Montreal office must have access to applications by using Remote Desktop Services (RDS).
You need to recommend a solution for the servers in the Montreal site.
What should you recommend?
A. Only install a domain controller in the Montreal site that has a Server Core installation of Windows Server 2012.
B. Install a read-only domain controller (RODC) in the New York site.
C. Install a read-only domain controller (RODC) in the Montreal site. Install a member server in the New York site to host additional server roles.
D. Install a domain controller in the Montreal site that has a Server Core installation of Windows Server 2012. Install a member server in the Montreal site to host additional server roles,
Answer: C