700-905 Premium Bundle

700-905 Premium Bundle

Cisco HyperFlex for Systems Engineers Certification Exam

4.5 
(51255 ratings)
0 QuestionsPractice Tests
0 PDFPrint version
December 4, 2024Last update

Cisco 700-905 Free Practice Questions

Our pass rate is high to 98.9% and the similarity percentage between our 700-905 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 700-905 exam in just one try? I am currently studying for the Cisco 700-905 exam. Latest Cisco 700-905 Test exam practice questions and answers, Try Cisco 700-905 Brain Dumps First.

Check 700-905 free dumps before getting the full version:

NEW QUESTION 1
Where is the VIC configuration for number type, identify, failover, settings, and bandwidth stored?

  • A. in non-volatile memory on the VIC
  • B. in UCS Manager service profiles
  • C. in VCenter virtual machine image
  • D. in UCS Manager server profiles

Answer: D

NEW QUESTION 2
With which three components must every HyperFlex cluster be equipped with in regard to disks? (Choose three.)

  • A. NVMe drives
  • B. there are no specific requirements
  • C. same type of cache drives
  • D. same type and size of capacity of drives
  • E. same number of capacity drives
  • F. SAS drives

Answer: CDE

Explanation:
700-905 dumps exhibit

NEW QUESTION 3
Which two steps should be performed before installing HyperFlex? (Choose two.)

  • A. Determine and download recommended hypervisor
  • B. Determine and download recommended VCenter required
  • C. Download service profile templates
  • D. Determine and download recommended UCS firmware required.
  • E. Determine and download virtual machine OS' required.

Answer: AD

NEW QUESTION 4
What is the minimum amount of memory required for an HX node?

  • A. 192 GB
  • B. 64 GB
  • C. 32 GB
  • D. 128 GB

Answer: D

Explanation:
700-905 dumps exhibit

NEW QUESTION 5
How many memory channels does the Cisco UCS M5 server support per CPU?

  • A. 1
  • B. 2
  • C. 6
  • D. 8

Answer: C

NEW QUESTION 6
Which two results are expected when you replace a node or expand a cluster? (Choose two.)

  • A. Distributed pooled data is migrated off nodes to master data store.
  • B. Affected node is marked as unhealthy and placed into standby mode
  • C. vSphere DRS migrates the virtual machines to the new node to balance the load
  • D. On node replace, the self-healing must finish for the cluster to be healthy
  • E. The cluster profile is updated and RAID takes care of rebalancing the load.

Answer: CD

Explanation:
700-905 dumps exhibit

NEW QUESTION 7
What is the maximum number of cores supported in the Cisco UCS M5 server?

  • A. 28
  • B. 22
  • C. 12
  • D. 8

Answer: A

NEW QUESTION 8
When cabling a given HX node to the Fabric Interconnect which three actions are required? (Choose three.)

  • A. Connect the node to different port numbers on each of the two Fabric Interconnects.
  • B. Connect port 1 on the VIC to Fabric Interconnect A.
  • C. Connect server port L1 to Fabric Interconnect port L1.
  • D. Connect the node to the same port number on each of the two Fabric Interconnects.
  • E. Connect server port L2 to Fabric Interconnect port L2
  • F. Connect port 2 on the VIC to Interconnect B.

Answer: BDF

Explanation:
700-905 dumps exhibit

NEW QUESTION 9
The process of optimizing information is tightly tied to the writing process as it is performed inline as the writing process is being performed The process of data optimization is performed with which two processes? (Choose two)

  • A. The primary CVM compresses the data, writes it to its cache drive and mirrors it
  • B. ACK is sent to the CVM that the write is about to be initiated
  • C. On write, the local lOVisor sends the write to the primary CVM for that block
  • D. On read/Writ
  • E. the distributed VAAI sends the write to the primary CVM for that block
  • F. The secondary CVM compresses the data, reads it from its cache drive and mirrors it

Answer: AC

Explanation:
700-905 dumps exhibit

NEW QUESTION 10
Which three advantages of using the M5 generation of HyperFlex servers over the M4 generation are valid? (Choose three )

  • A. Support for Cisco VICs
  • B. Multiple GPUs
  • C. M.2 SATA drive support for faster disk I/O
  • D. DDR3 memory
  • E. Microsoft Hyper-V support
  • F. NVMe support

Answer: CEF

Explanation:
700-905 dumps exhibit

NEW QUESTION 11
Which version of HXDP was the first to support multiple VICs on a single server?

  • A. HXDP 3.5.1
  • B. HXDP 3.0
  • C. HXDP 4.0
  • D. HXDP 3.5

Answer: A

Explanation:
700-905 dumps exhibit

NEW QUESTION 12
Which statement about Standalone Cisco UCS Server Deployments is valid?

  • A. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
  • B. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
  • C. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
  • D. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment

Answer: C

Explanation:
700-905 dumps exhibit

NEW QUESTION 13
In all HX server types, where are capacity drives installed?

  • A. side
  • B. top
  • C. back
  • D. front

Answer: D

Explanation:
700-905 dumps exhibit

NEW QUESTION 14
Which two ways does Cisco HyperFlex upgrade the traditional RAID? (Choose two.)

  • A. HyperFlex enables stretched RAID arrays spanning multiple geographic sites.
  • B. Hardware replacement initiates self-healing with minimal impact
  • C. Limiting the number of drives locally, which are not a part of the shared datastore.
  • D. Distributing data locally, not just across the hosts in HyperFlex cluster
  • E. Eliminating the need for additional hardware cards, while maintaining high performance.

Answer: BE

Explanation:
700-905 dumps exhibit

NEW QUESTION 15
What is the maximum size of an HXDP cluster running 3.5.1?

  • A. 64 nodes
  • B. 8 nodes
  • C. 16 nodes
  • D. 32 nodes

Answer: A

Explanation:
700-905 dumps exhibit

NEW QUESTION 16
Which two statements on Replication Factors are valid? (Choose two.)

  • A. RF2 has 100% better protection of data while using 33% more space and is recommended.
  • B. RF3 has 100% better protection of data while using 33% more space and is recommended.
  • C. LAZ can increase RTO for 16+ node clusters.
  • D. When performing rolling upgrades, the upgraded node is down for maintenance, stretching RF2 to the absolute limit.
  • E. LAZ can decrease fault tolerance of S+ node clusters to less than 4

Answer: BD

Explanation:
700-905 dumps exhibit

NEW QUESTION 17
Which two steps should be performed before installing HyperFlex? (Choose two.)

  • A. Determine and download recommended installer OVA version required
  • B. Complete the pre-installation checklist.
  • C. Determine and download recommended hypervisor
  • D. Download service profile templates
  • E. Determine and download virtual machine OS! required

Answer: AB

NEW QUESTION 18
When local writing or reading is performed, the lOVisor intercepts the read/write requests and forwards them to CVMs across the cluster This action allows non-local CVMs to be aware of the input/output requests so that they can perform the appropriate input/output action lOVisor provides which two additional functionalities? (Choose two.)

  • A. provides redundancy when local CVM fails, offloading data processing to another CVM in the cluster
  • B. when an lOVisor fails, the CVM remains active and functional, which enables uninterrupted operation of the system by forwarding 10 to another available lOVisor In the HyperFlex cluster
  • C. enables asynchronous replication of data across individual HyperFlex nodes with sub-second re-convergence
  • D. integration point for deployment of cloud-based SaaS offerings from eco-system partners
  • E. intercepts local virtual machines' reads and writes and distributes them across the network eliminating hotspots

Answer: AE

Explanation:
700-905 dumps exhibit

NEW QUESTION 19
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to automatically build the service profile in UCS Manager?

  • A. Check Run UCS Manager Configuration during the cluster creation process
  • B. Check the extended memory option during the cluster creation process
  • C. Check the GPU workflow during the cluster creation process
  • D. Check the administrative workflow option during the cluster creation process

Answer: C

Explanation:
700-905 dumps exhibit

NEW QUESTION 20
......

Thanks for reading the newest 700-905 exam dumps! We recommend you to try the PREMIUM Certleader 700-905 dumps in VCE and PDF here: https://www.certleader.com/700-905-dumps.html (50 Q&As Dumps)


START 700-905 EXAM