Avaya 75940X Free Practice Questions

NEW QUESTION 1
An installation engineer is installing the power connections to the ACP 4200. What must the installation engineer be aware of?

• A. Before connecting the power, the power switches of all components in the rack must be in the OFF position.
• B. Power cables must only access the rack from the top of the rack.
• C. Power connections must be within 10 feet (3 meters) of the rack.
• D. Power cables must only access the rack from the bottom of the rack.

Answer: A

NEW QUESTION 2
Which application can a technician use to remotely connect to the Management Server Console on an ACP 4200?

• A. VNC
• B. Remote Desktop Connection
• C. PuTTY
• D. Team Viewer

Answer: B

NEW QUESTION 3
Which statement about the Nimble Storage used in ACP 4200 4.0 is true?

• A. It is connected directly to the ESXi hosts via multiple 10G links.
• B. It is connected directly to the ESXi hosts via multiple 1G links.
• C. It is connected to the network switches via multiple 10G links.
• D. It is connected to the network switches via multiple 40G links.

Answer: C

NEW QUESTION 4
A customer experienced an outage of one of their Host servers in their ACP 4200 solution. Additionally, after the failure, all of the applications that were running on the failed host, did not recover to another host.
To verify the configuration, which third party management tool needs to be used?

• A. SSH into the switches
• B. Avaya Orchestrator
• C. Nimble Storage web interface
• D. vSphere Web Client

Answer: D

NEW QUESTION 5
After implementing a new ACP 4200 solution, warnings about high temperatures on one of the host servers are reported by the Avaya Orchestrator.
To verify the temperature, fan speeds, and general hardware health of the HP Servers in the ACP 4200, which third party management tool can be used?

• A. Nimble storage web interface
• B. ESXi server client
• C. HP iLO web interface
• D. vSphere Web Client

Answer: C

NEW QUESTION 6
Refer to the exhibit.

An administrator notices that the Rack View of Avaya Orchestrator is highlighted with a Red X on the graphical representation of the rack.
What does this indicate?

• A. At least 50% of the hosts in the rack contain a service which is in critical state.
• B. The rack has a front door that is currently unlocked.
• C. The rack is currently unreachable.
• D. At least one of the hosts in the rack contains a service which is in critical state.

Answer: D

NEW QUESTION 7
Refer to the exhibit.

An administrator is trying to add a new VSP to the ACP 4200 rack. However, when the Configuration Wizard is run and the 'Detect Hardware' button is clicked, the VSP cannot be detected.
What is potentially causing this to happen?

• A. The VSP has not been configured with the correct slot in Configuration Wizard.
• B. The VSP has not been configured with the correct Device Description in Configuration Wizard.
• C. The VSP has not been configured with the correct Protocol in Configuration Wizard.
• D. The VSP's device credentials has not been configured correctly in System Manager.

Answer: D

NEW QUESTION 8
A new instance/customer and new VMs are being added to the ACP 4200. As part of this procedure, additional VLANs are added to the ACP 4200.
What are these additional VLANs required to support?

• A. The new instances of ServerTech PDUs.
• B. The new instances of iSCSI Storage Area Networks.
• C. The new instances of Avaya Aura applications.
• D. A new instance of Avaya Orchestrator.

Answer: A

NEW QUESTION 9
Which two circumstances would require the Avaya Orchestrator ACP Configuration Wizard to be run in the field? (Choose two.)

• A. When a new G450 Gateway is added to the ACP.
• B. When a new configuration file for the ACP's VSP Switches is deployed.
• C. When a new Virtual Machine is added to the ACP.
• D. When a new ESXi Host is added to the ACP.

Answer: BD

NEW QUESTION 10
The Storage dashlet contains a view of the status of the Host and Services related to the Storage. By default, in which two places can this dashlet be viewed in Avaya Orchestrator? (Choose two.)

• A. The Service Status View
• B. The Home Dashboard
• C. The Host Status View
• D. The Storage Dashboard
• E. The Rack View

Answer: AB

NEW QUESTION 11
Which two are valid levels of VMware performance monitoring? (Choose two.)

• A. Visualization Performance and Fault Manager (VPFM)
• B. Virtual Machine (VM)
• C. Data Center (DC)
• D. Host

Answer: BD

NEW QUESTION 12
Using VMware networking in ACP 4200, how are Virtual NICs mapped to physical NICs?

• A. Via DRS rules
• B. On a 1-to-1 basis
• C. Via Virtual Switches and Port Groups
• D. Via the VNIIC mapping tables

Answer: D

NEW QUESTION 13
Which three examples of hardware equipment redundancy are built into the ACP 4200? (Choose three.)

• A. Redundant iLO connections to each HP server.
• B. Redundant storage processors in the storage arrays.
• C. Redundant hot swap switch CPU modules.
• D. Redundant power supplies in all hardware components.
• E. Redundant pairs of Power Distribution Units.

Answer: ACE

NEW QUESTION 14
How would an administrator display the IP addresses of the VSP switches of the ACP 4200 within the Avaya Orchestrator Home Dashboard?

• A. By right-clicking on the Dashboard menu item and downloading the network summary report.
• B. By right-clicking on the Admin menu item and downloading the network summary report.
• C. By right-clicking on the Report menu item and downloading the network summary report.
• D. By hovering the mouse pointer over the Up status indicator within the Network dashlet.

Answer: B

NEW QUESTION 15
In which two situations does the Customer and Network Lifecycle workbook need to be updated? (Choose two.)

• A. On the 31st of January every year, even if no changes have been made to the ACP 4200.
• B. When an ACP 4200 component password is changed.
• C. When a new Administrator is given access to the ACP 4200.
• D. When a new host server is added to the ACP 4200.

Answer: BD

NEW QUESTION 16
An ACP 4200 engineering team is considering deploying an Extension Rack. What is the purpose of the Extension Rack?

• A. When the Main rack is not functioning properly the Extension Rack will take over for the main.
• B. When all hardware components cannot fit into the Main ACP Rack, Extension Racks are used for additional physical appliances and servers.
• C. When full redundancy is needed, Extension Racks are used for additional physical appliances and servers.
• D. When the number of telephone extensions on the Avaya Aura® applications exceed the recommended limit, Extension Racks are used to host additional media resources to support a higher limit.

Answer: C

NEW QUESTION 17
When a new instance and new VMs are added to ACP 4200, additional VLANs are added to the ACP 4200. To what are these VLANs added?

• A. The VSP Switches only.
• B. The ESXi Hosts only.
• C. The VSP Switches and ESXi Hosts.
• D. The VSP Switches, the ESXi Hosts, and the existing VMs.

Answer: C

NEW QUESTION 18
......