Avaya 76940X Free Practice Questions

NEW QUESTION 1
Before starting the vCenter Server Appliance from 6.0 to 6.5, which Cluster feature needs to be disabled?

• A. vSphere HA
• B. vSphere DRS
• C. vSphere vMotion
• D. vSphere HA heartbeat datastore

Answer: B

NEW QUESTION 2
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0, and is upgrading the Extreme Network VSP switches to release 7.1.
Which two applications available on the on the MSC would the engineer typically use for the upgrade process? (Choose two.)

• A. Avaya Orchestrator
• B. PuTTY
• C. WinSCP
• D. Enterprise Device Manager

Answer: AD

NEW QUESTION 3
A support engineer logs into the System Manager (SMGR) application on an ACP 4.0 system with the intention of checking VPFM warning messages for the VSP switch. The engineer is unable to see the VPFM link in SMGR.
What could be causing this Problem?

• A. The VPFM link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
• B. The engineer's SMGR account has insufficient access privileges to launch VPFM.
• C. The VPFM link has been renamed as Orchestrator in ACP 4.0.
• D. The engineer should connect to VPFM directly and not through SMGR.

Answer: B

NEW QUESTION 4
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. In preparation for upgrading the HPE server firmware, the engineer notices that another colleague has already downloaded files.
Which two files should the engineer use? (Choose two.)

• A. hp-firmware-ilo4-2.60-1.1.i386.rpm
• B. bp-avaya-dl360g9-g10-ACP-4_0-New-only.iso
• C. SP99382.exe
• D. ACP_40_ilo4_261.bin

Answer: BD

NEW QUESTION 5
What does it mean when a support engineer clicks on the Latest Alerts link in Orchestrator and finds that there are no alerts listed?

• A. There are no Hosts or Services that have been in Warning or Critical state in the past 7 days.
• B. There are no Hosts or Services that have been in Warning or Critical state in the past 24 hours.
• C. There are no Hosts or Services that have been in Warning or Critical state in the past 4 hours.
• D. There are no Hosts or Services that are currently in Warming or Critical state.

Answer: D

NEW QUESTION 6
Before downloading and applying a PDU patch, you must determine the type of PDU the ACP 4200 is using. Which two kinds of PDUs are valid? (Choose two.)

• A. Switched
• B. Synchronized
• C. Smart
• D. Stationary
• E. Static

Answer: BD

NEW QUESTION 7
A customer called saying vMotion is not working as expected. To determine the issue, what is the first thing you would try?

• A. Check all physical wiring.
• B. From one of the Hosts, try to ping the vMotion VMKernel of the “Destination” Host.
• C. Place both hosts in maintenance mode, then restart once completed.
• D. Shut down and restart both hosts.

Answer: D

NEW QUESTION 8
Which two upgrade tasks are required before upgrading the ESXi servers to 6.5? (Choose two.)

• A. Upgrade the HP Server iLO firmware.
• B. Upgrade the PDU firmware.
• C. Upgrade the switch firmware.
• D. Upgrade the HP Server firmware.

Answer: AC

NEW QUESTION 9
A support engineer is experiencing some difficulty correlating the error messages and logs from different systems in the ACP 4200.
What should the engineer do to fix this problem?

• A. Use the VMware integrated time server to supply time to all systems.
• B. Manually synchronize the time on all the ACP systems to a correct vCenter.
• C. Use the MSC NTP service tied to external NTP time servers to synchronize the time on all systems.
• D. The VSP switches have NTP servers built into them, and all other systems can use NTP to synchronize to them.

Answer: B

NEW QUESTION 10
While configuring the MSC to use NTP you see the NTP synching fail. What is the most common cause of this problem?

• A. VMware is not supporting NTP.
• B. The VSPs are rejecting the NTP messages.
• C. The NTP server is installed outside of the ACP 4200.
• D. The customer has a firewall between the MSC and the customer’s NTP server.

Answer: B

NEW QUESTION 11
A maintenance window has been scheduled to allow for the upgrade of the firmware of one of the VSP switches in the ACP.
What can be done to avoid receiving unnecessary notifications during this period?

• A. Disable Syslog messages on the VSP switch before performing the upgrade.
• B. Disable SNMP trap notification on the VSP switch before performing the upgrade.
• C. Use the Acknowledgments feature in the Orchestrator to acknowledge any notifications immediately.
• D. Use the Schedule Downtime feature in Orchestrator to schedule period of expected service interruption.

Answer: A

NEW QUESTION 12
A support engineer is tasked with upgrading a CPOD 2.1 system to ACP 4200 4.0. Which statement about the upgrade process is true?

• A. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, and a direct upgrade path is supported.
• B. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.
• C. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is not supported.
• D. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, but a direct upgrade path is only partially supported.

Answer: B

NEW QUESTION 13
A support engineer is tasked to power down a VSP switch using the management tools available for the ACP 4200.
Which statement is true about how the engineer would accomplish this task?

• A. Login to Enterprise Device Manager and use the chassis power down option.
• B. Login to Servertech PDU Web Interface and use the outlet control option.
• C. This can only be done if the engineer is on-site to switch off the VSP’s power switch.
• D. This can only be done if the engineer is on-site to remove the VSP’s power cable.

Answer: A

NEW QUESTION 14
A support engineer has completed the upgrade of a PodFX 3.1 system to ACP 4200 4.0.
What should the engineer do with Virtual Machine snapshots that were created during the upgrade process?

• A. The VM snapshots should be backed up to external storage and deleted immediately.
• B. The VM snapshots should be deleted immediately.
• C. The VM snapshots should be deleted within 72 hours of the verified, successful completion of the upgrade process.
• D. The VM snapshots should be left as they are as a backup of the upgrade process.

Answer: C

NEW QUESTION 15
You notice that Orchestrator is unable to automatically discover a new HP DL360 G10 Server that has been added to the ACP.
What could be causing this problem?

• A. The Server has not been configured to send SNMP traps and Syslog messages to Orchestrator.
• B. The Server’s firmware has not been patched with the HotFix needed to reply to Orchestrator’s discovery messages.
• C. Orchestrator’s auto-discovery schedule has been left disabled by default.
• D. This is expected as Orchestrator does not automatically discover new devices.

Answer: A

NEW QUESTION 16
Before a switch that has failed can be replaced with a new switch, what needs to be done?

• A. The replacement switch needs to have its configs defaulted.
• B. The remaining switch that is not being replaced needs to have its configs reset to defaults.
• C. The switch can be replaced without any preparation.
• D. The switch needs to have the appropriate backup restored on it.

Answer: A

NEW QUESTION 17
......