Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 4)
Which procedure will create a NIM lpp_source resource from an ISO image?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: D
Q2. - (Topic 2)
Which command is used to change the reserve policy of a disk?
A. chdev
B. chpv
C. chvg
D. chattr
Answer: A
66. - (Topic 2)
An administrator wants to reorganize some of the logical volumes in the datavg volume group.What TWO things must the administrator verify before starting the reorganization? (Select 2)
A. Enough free physical partitions exist to accommodate the largest logical volume being reorganized.
B. At least one free physical partition exists.
C. That noneof the logical volumes contain a paging space.
D. The logical volumes being reorganized are relocatable.
E. Quorum has been disabled for the volume group.
F. The volume group descriptor area (VGDA) has room to expand.
G. That any raw logical volumes beingre-organized are closed.
Q3. - (Topic 1)
What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up asa 'Mover Service Partition’.
Answer: A
Q4. - (Topic 4)
A system with multiple applications is experiencing bursts of activity. This drives the free pages list very low, resulting in increased wait times for applications.
Given the vmstat output below, what can be done to increase the number of free pages to compensate for thesebursts of activity?
A. Increase the maxpin tunable.
B. Increase the page space size.
C. Increase the lru_file_repage setting.
D. Increase the minfree and maxfree tunables
Answer: D
Q5. - (Topic 4)
Given the NIB configuration shown below, what is the most likely reason that after a link failure for ent0, there was no automatic failover to ent2?
A. Alternate Address is not set
B. No Internet Address to Ping is specified
C. Automatically Recover to Main Channel is set to yes
D. ent0 and ent2 have different media speeds specified
Answer: B
Q6. - (Topic 2)
Anadministrator was told to reverse the search order of a working DNS lookup. During application testing it was discovered that network resolution was not working for the end users.
Given the following output, what is the most likely cause?
A. The firstDNS server is unreachable.
B. The netsvc.conf has the incorrect host lookup order.
C. Incorrect file permissions on the/etc/resolv.conf file.
D. The host is not on the network.
Answer: C
Q7. - (Topic 1)
What is required for a volume group to be eligible for automatic Geographic Logical Volume Mirroring (GLVM) mirroring?
A. The volume group must be created as a Scalable Volume Group.
B. The volume group must be managed by Cluster Aware AIX.
C. The volume group must be concurrent capable.
D. The volume group has at least two LVM mirror pools defined.
Answer: A
Q8. - (Topic 4)
Which previously unsupported management feature does HMC V7R760 bring to Power Blade servers?
A. Dual VIO Servers
B. Hypervisor Mirroring
C. N_Port ID Virtualization
D. Active Memory Sharing
Answer: A
Q9. - (Topic 2)
How can an administrator determine if DLPAR operations can be performed for a specific LPAR?
A. Run the Isdlpar -partition command on the local HMC.
B. Run the IsrsrclBM.MCP command on the LPAR.
C. Run the Iparstat -dlpar command on the LPAR.
D. Run the rmcctrl -d command on the local HMC.
Answer: A
Q10. - (Topic 4)
In the graphic below, the LPAR's current physical and virtual processor allocation matches its desired settings How do these settings limit system processor assignment for the LPAR?
A. The LPAR can increase to 16.00 processing units of capacity in the shared processing pool as needed.
B. The LPAR will be able to use a maximum of 6.0 processing units of capacity in the shared processing pool.
C. The LPAR will be able to use a maximum of 4.0 processing units of capacity in the shared processing pool.
D. The administrator will be allowed to add a maximum of 4.0 additional processing units to the LPAR using DLPAR, making its allocation 6.0 processing units.
Answer: B
Q11. - (Topic 2)
Which command will show all the logical volumes, filesystem mount points, and the volume group in which they reside?
A. Islv-al
B. mount-v
C. df-vAg
D. Isvg | Isvg -il
Answer: D
Q12. - (Topic 4)
A customer has been creating LPARs on a new POWER8 system.
After successfully activating the first 10 LPARs, the customer notices that the available RAM on physical machine reported by the HMC has reduced more than the sum of the memory currently allocated to the activated LPARs.
The Customer appreciates there will be a memory overhead for each activated LPAR, but the overhead appears more than expected.
Which LPAR attribute is the likely cause for the excess in memory consumption?
A. Active memory expansion factor
B. Maximum Virtual Adapters
C. Maximum memory
D. Maximum pages
Answer: A
Q13. - (Topic 3)
An LPAR has 32 CPUs, and is reporting hundreds of page-ins and page-outs per seconD. At what level of paging should the administrator become concerned?
A. Above the size of the paging space size in 4KB pages
B. Above 50 pages per second
C. Above 10 pages per CPU per second
D. Above 10 pages per GB of allocated memory per second
E. Above the number of paging space disks
Answer: C
Q14. - (Topic 2)
In the following figure, what TWO things must be done before an EtherChannel can be created from the ent0 and ent1 adapters?
A. The ent0 and ent1 adapters must be connected to different switches to provide both additional bandwidth and adequate redundancy in the EtherChannel that is created.
B. EtherChannel support capability must be verified for the Ethernet switch.
C. The IP configuration must be removed from en0.
D. The AIX host must be completely disconnected from the network,
E. The en1 interface must be configured with IP information.
Answer: B,C
Q15. - (Topic 4)
An administrator attempts to install the fileset tivoli.tsm.client, but it fails due to missing requisites.
The administrator copies the required filesets into the install directory and tries the preview install again. It fails with the same results, as shown in the graphic below.
What must the administrator do to successfully install the filesets?
A. Remove the .toe file or run inutoc.
B. Provide the correct version of xlsmp.rte.
C. Make the permissions of all of the filesets group executable
D. Make the permissions of the requisite filesets group readable
Answer: A
Q16. - (Topic 4)
What must be done to change the default AIX login screen, which is displayed before the login prompt, when a system is accessed using telnet?
A. Add the desired text to the /etc/motd file.
B. Edit the herald field in the /etc/security/login.cfg file.
C. Update the MESG environment variable in /etc/environment.
D. Add the LC_FASTMSG environment variable to /etc/profile.
Answer: B