Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 3)
How many concurrent SSH administrative sessions for a node are supported?
A. 25
B. 64
C. 128
D. 125
Answer: B
Q2. - (Topic 3)
Within clustered Data ONTAP 8.2 or later, which two functionalities are supported with an external asynchronous FPolicy server? (Choose two)
A. Audit logging
B. Compression and decompression services
C. Encryption and decryption services
D. File Access
E. Hierarchical storage management
Answer: A,D
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196817/html/vserver/fpolicy/policy/external-engine/create.html
Q3. - (Topic 1)
A user is reporting trouble using a SVM management LIF. You have verified host configuration, network connectivity, and that the LIF responds to pings.
What should you do to continue troubleshooting this problem?
A. Ensure the SVM management LIF’s failover policy is correct.
B. Ensure the SVM management LIF’s administrative status is up.
C. Ensure the SVM management LIF is on its home port.
D. Ensure the SVM management LIF’s firewall policy is set to management.
Answer: A
Explanation: Explanation: You must have prepared the.SVM.networking for a major upgrade by creating the necessary.SVM.management LIFs, failover groups, and routes. Reference:https://library.netapp.com/ecmdocs/ECMP1636041/html/GUID-5B0E96CF-78F8-40B9-A62D-C5A6E62A53D7.html
Q4. - (Topic 3)
Which SAN LIF type allows failover?
A. iSCSI LIFs only
B. FCoE LIFs only
C. FC LIFs only
D. iSCSI LIFs and FCoE LIFs only
E. FC LIFs and FCoE LIFs only
F. None of the above
Answer: F
Q5. - (Topic 3)
Which of the following logical interfaces have failover and migration capabilities? (choose all that apply)
A. client
B. cluster management
C. data
D. node management
E. controller
Answer: B,C
Q6. - (Topic 1)
You set up a SnapMirror relationship between two clusters and start the SnapMirror initialization. The transfer starts without error and begins replicating data. Before the initialization completes, a network failure occurs and the transfer fails to finish. Once the network failure is corrected, you attempt to initialize the transfer again, but receive the following error:
Volume rep_vol01 is restricted
Which step should you perform before attempting re-initialization?
A. Change the state of the destination volume to online.
B. Delete all Snapshot copies on the destination volume.
C. Change the state of the destination volume to offline.
D. Delete all data in the destination volume.
Answer: A
Q7. - (Topic 2)
What communication link is necessary in order to establish cluster peer relations between two clusters?
A. The cluster interface on each node must be able to communicate with the intracluster interface on each node in the peer cluster.
B. The cluster interface on each node must be able to communicate with the node-mgmt interface on each node in the peer cluster
C. The intracluster interface on each node must be able to communicate with the intracluster interface on each node in the peer cluster.
D. The intercluster interface on each node must be able to communicate with the intercluster interface on each node in the peer cluster.
Answer: D
Q8. - (Topic 2)
Identify two synchronous Fpolicy applications (choose two)
A. quota management
B. file-access and audit logging
C. storage resource management
D. compression and decompression services
Answer: A,D
Explanation:
Output from NetApp "Clustered Data ONTAP 8.2 File Access Management-Guide"
Asynchronous applications are ones where the external FPolicy server does not alter access to files or directories or modify data on the Storage Virtual Machine (SVM). For example:
. File access and audit logging
. Storage resource management Synchronous applications are ones where data access is altered or data is modified by the external FPolicy server. For example:
. Quota management
. File access blocking
. File archiving and hierarchical storage management
. Encryption and decryption services
. Compression and decompression services
Q9. - (Topic 2)
When using Data ONTAP 8.1 Cluster-Mode and later, what is the default for new aggregates?
A. 32-bit aggregates
B. 64-bit aggregates
C. 128-bit aggregates
D. cluster aggregates
E. traditional aggregates
F. Vserver aggregates
Answer: B
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-D9F611BC-F7B4-4057-A76B-357BBAB7002F.html
Q10. - (Topic 2)
Which two statements are true with clustered Data ONTAP support of IPv6? (Choose two)
A. IPv4 and IPv6 configurations are supported on the cluster management LIF
B. IPv4 and IPv6 configurations are supported on the same data LIF
C. IPv6 allows a data LIF to span more than one Vserver
D. IPv4 and IPv6 configurations are supported on the cluster interconnect
Answer: A,B
Explanation:
Link: https://library.netapp.com/ecm/ecm_download_file/ECMP1196907
Q11. - (Topic 3)
Which two now feature are available in Data ONTAP 8.1.1 C-Mode? (Choose two)
A. Flash pool
B. SSD Support
C. Infinite volume
D. Infiniband
Answer: A,C
Explanation:
https://communities.netapp.com/community/netapp-blogs/sanbytes/blog/2012/06/24/announcingdata-ontap-811-operating-in-cluster-mode
Q12. - (Topic 1)
What is the maximum number of nodes allowed in an FAS8000 series with a SAN configuration?
A. 24
B. 8
C. 4
D. 2
Answer: B
Explanation: SAN: Up to 8 cluster nodes Reference: http://cloudcarib.com/pdf/NetApp-8000.pdf
Q13. - (Topic 3)
What are two capabilities of Vserver setup? (Choose two)
A. It licenses Vserver functionality
B. It joins an exisiting Vserver to the cluster.
C. it creates a new Vserver that can host FCP LUNs.
D. It creates a new cluster Vservers
E. It configures an existing Vserver
Answer: D,E
Explanation: https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-68CC383E-06E6-48AF-B7F5-8B510750EDDE.html
Q14. - (Topic 3)
Netapp Remote Support Agent (RSA) is supported which two FAS module types? (Choose two)
A. BMC
B. ILO
C. RLM
D. RTC
E. SP
Answer: C,E
Q15. - (Topic 2)
If a customer has a 2-node cluster, which of the following must be enabled for storage failover (SFO) to function properly?
A. cluster ha modify –configured true
B. cluster modify –node –eligibility true
C. storage failover modify -node enabled true
D. storage failover modify –node -hwassist true
Answer: A
Q16. - (Topic 2)
What's the minimum System Manager version to access cluster 8.2?
A. System Manager 1.0
B. System Manager 2.2
C. System Manager 2.0
D. System Manager 3.0
Answer: B