Network-Appliance NS0-184 Free Practice Questions

NEW QUESTION 1
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP
System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?

• A. Cloud Manager
• B. ONTAP System Manager
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

NEW QUESTION 2
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and
need to obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)

• A. management IP addresses
• B. cluster switch name
• C. gateway IP address
• D. BMC IP addresses
• E. cluster name

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 3
Your customer is migrating data from a legacy FAS8020 system that runs ONTAP9.5 software to a
new AFFA250 MetroClusteroverIP configuration.
In this scenario, which two methods would be supported to migrate the data? (Choose two.)

• A. PerformacontrollerswapfromtheFAS8020totheAFFA250s.
• B. Create a4-node cluster on one side and use the volmove commandtomigrate the data.
• C. Useahost-basedcopymigrationmethod.
• D. ConfigureaSnapMirrorcopybetweentheFAS8020andtheAFFA250systems.

Answer: AD

NEW QUESTION 4
You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the
preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for
the deployment?

• A. ConfigBuilder
• B. Interoperability Matrix Tool
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-select/pdfs/fullsitesidebar/ONTAP_Select_documentation.pdf

NEW QUESTION 5
Click the Exhibit button.

Immediately after installing a 4-node FAS8200 cluster, you discover that node, “cluster1-02”, must be
removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)

• A. Verify that high availability is configured for failover to the HA partner, then remove the node.
• B. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
• C. Move Epsilon to cluster1-02, then remove the node.
• D. Remove the node, then the cluster will elect a new master to remain in quorum.

Answer: AC

NEW QUESTION 6
Which two functions does the management network provide? (Choose two.)

• A. to provide access to the system console of any node in the cluster
• B. to collect diag log files
• C. to replicate the cluster configuration to all nodes
• D. to transfer SVMs between the cluster nodes

Answer: AB

NEW QUESTION 7
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?

• A. RAID 4
• B. RAID-TEC
• C. RAID 0
• D. RAID DP

Answer: D

NEW QUESTION 8
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks
assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?

• A. 20
• B. 18
• C. 17
• D. 19

Answer: A

NEW QUESTION 9
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

• A. Brocade FOS
• B. Cisco NX-OS
• C. CiscoIOS
• D. Broadcom EFOS

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsitesidebar/AFF_and_FAS_Switch_Documentation.pdf

NEW QUESTION 10
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
Telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential bestpractice gaps.
Which tool satisfies the customer’s requirements?

• A. Active IQ Digital Advisor
• B. Interoperability Matrix Tool
• C. Spot by NetApp
• D. Cloud Manager

Answer: A

Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

NEW QUESTION 11
Click the Exhibit button.

Which set of components on a FAS9000 are highlighted in the exhibit?

• A. FCVI-Module, Controller, Serial-Port, FlashCache-Module
• B. SAS-Module, Controller, USB-Port, FlashCache-Module
• C. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
• D. Powersupply, Controller, USB-Port, NVRAM-Module

Answer: A

NEW QUESTION 12
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster
that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)

• A. Add the new nodes to the existing cluster and switches.
• B. Createanew2-nodeswitchedclusterthatusestheCN1610clusterswitches.
• C. Createanew2-nodeswitchlesscluster.
• D. Migrate the existing cluster to new switches and add the new nodes.

Answer: BD

Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardwar
e_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover

NEW QUESTION 13
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp. You use the
autosupport history show command and see the output shown in the exhibit. The customer confirms that the AutoSupport settings are correct.

Which two actions will solve this issue? (Choose two.)

• A. The customer needs to enable AutoSupport for both nodes.
• B. The customer needs to exclude the two nodes from the attachment-size limitation.
• C. The customer needs to change the transport protocol to HTTP.
• D. The customer needs to white-list the two nodes on their mail server.

Answer: AC

NEW QUESTION 14
Which command would be used to measure the throughput and latency of traffic between nodes?

• A. qos statistics workload performance show
• B. cluster ping-cluster
• C. network test-path
• D. statistics node show

Answer: C

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Manage_performance_issues.pdf

NEW QUESTION 15
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

• A. Active IQ Digital Advisor
• B. Cloud Insights
• C. ONTAP System Manager
• D. Active IQ Unified Manager

Answer: D

NEW QUESTION 16
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Addtheshelftothe existingstack.
• B. Create a newstackon the HA pairto add the shelf.
• C. Connectthe shelfto anHA pair withNSE drives.
• D. LicenseNSE and add the shelfto thisHA pair as a new stack.

Answer: A

NEW QUESTION 17
You are installing a new ONTAP 9.8 cluster by using System Manager Guided Setup. In this scenario, which IP address is optional?

• A. node A IP address
• B. node B IP address
• C. gateway IP address
• D. cluster IP address

Answer: C

NEW QUESTION 18
You are preparing to physically install a new AFF A400 cluster into a customer’ sracks. All equipment
Has been delivered to the customer’s site.
Which three tools do you need to complete this installation? (Choose three.)

• A. additional network cables
• B. Phillips #2 screwdriver
• C. laptop computer
• D. slide railkit
• E. cable management tray

Answer: ABC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a400/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 19
Click the Exhibit button.

After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)

• A. Open https://support.netapp.com, using the partner credentials.
• B. Open https://support.netapp.com, using the customer credentials.
• C. Open My Cases, and select the 41747189 case number.
• D. Open My Cases, and select Create a Case.

Answer: BC

Explanation:
Reference: https://mysupport.netapp.com/site/info/find-support

NEW QUESTION 20
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?

• A. Active IQ Upgrade Advisor
• B. Interoperability Matrix Tool
• C. NetAppDocs
• D. Active IQ Config Advisor

Answer: C

NEW QUESTION 21
......