Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Proper study guides for Replace Network-Appliance NetApp Certified Implementation Engineer - SAN. ONTAP certified begins with Network-Appliance NS0-520 preparation products which designed to deliver the Breathing NS0-520 questions by making you pass the NS0-520 test at your first time. Try the free NS0-520 demo right now.
Online Network-Appliance NS0-520 free dumps demo Below:
NEW QUESTION 1
You install an ASA AFF A400 system with 32 GB FC SFP+ modules in port 0e and 0f. After creating the SVM and configuring the FCP protocol, the physical port stays offline. Referring to the exhibit which statement is correct?
Answer: B
Explanation:
Before using your UTA ports on a FC infraestructure, you need to modify the current mode from CNA to FC. You need to set the ports offline before you modify that parameter.
You can find more information on this link:
http://docs.netapp.com/ontap-9/index.jsp?topic=/com.netapp.doc.dot-cm-sanag/GUID-E2CD31BE-28E
NEW QUESTION 2
A user cannot add more than one NVMe data LIF in ONTAP 9.4 on an SVM with a data protocol parameter set to nvme.
In this scenario, what is the problem?
Answer: B
NEW QUESTION 3
Click the Exhibit button.
You notice that your volume named vol1 has a temporary volume that is doubling the space that is used by the volume.
In this scenario, which operation caused the volume to take up twice the space?
Answer: D
Explanation:
Reference:
https://community.netapp.com/t5/Data-ONTAP-Discussions/Volume-takes-much-more-space-than- expected/td-p/100619
NEW QUESTION 4
Click the Exhibit button.
A 4-node cluster was expanded with two news nodes (Nodes 5 and 6). You are now attempting to set up four FC LUNs on the two new nodes that use the ps2 igroup name, although FC ping works. LUNs on the previous four nodes are discoverable, but the four new LUNs on the new controllers are not discoverable.
Referring to the exhibit, what is the problem?
Answer: C
NEW QUESTION 5
Which configuration for primary block (FC and iSCSI) data does NetApp best practices recommend? (Choose two.)
Answer: CD
NEW QUESTION 6
Referring to the exhibit, which two LIFs would be optimized paths to LUN /vol/OraDev_Vol/OraDev? (Choose two.)
Answer: A
NEW QUESTION 7
When setting up a VLAN for administrative security purposes, which four ports are the only important ports to include in the VLAN? (Choose four.)
Answer: ABDF
NEW QUESTION 8
A company wants to use jumbo frames to improve performance with their iSCSI network. When setting up the Ethernet switches for jumbo frames, which three components need to be configured? (Choose three.)
Answer: CDF
NEW QUESTION 9
Which two components should be installed to support VMware VMFS6 datastores in an environment with only Ethernet switches? (Choose two)
Answer: CD
Explanation:
Installing VSC is the best practice recommended by Netapp when you use VMware and this is an environment with only Ethernet switch, so ISCSI licenses are needed to present LUNs to the Virtual
environment.
You can find more information on this link:
https://docs.netapp.com/us-en/netapp-solutions/pdfs/sidebar/VMware_vSphere_with_ONTAP_Best_Practices.p
NEW QUESTION 10
An administrator has an ONTAP cluster with SVMs and LUNs as shown in the exhibit. Hosts attempting to connect to LUNs mapped from SVM "C" are unable to see their LUNs. The hosts are not configured to connect to any other SVM.
Which action should be performed to restore multi-path connectivity to the LUNs in this scenario?
Answer: A
NEW QUESTION 11
A customer has an AFF A700 connected to a Cisco switch and has verified connectivity but cannot see any LUNs. The customer issued the run -node scaling-01 -command fcp topology show command to verify the connection.
Referring to the exhibit, what needs to be enabled on the Cisco switch?
Answer: D
NEW QUESTION 12
Exhibit.
A Linux host cannot discover a newly provisioned LUN. Referring to the exhibit, what would be the cause of the problem?
Answer: C
NEW QUESTION 13
Exhibit.
An administrator is configuring FCoE on Cisco Nexus switches for a new AFF A200 ONTAP cluster. The administrator executes the commands shown in the exhibit to create the necessary network configuration.
Which VLAN is responsible for controlling the FCoE traffic on the new interface?
Answer: B
NEW QUESTION 14
You are testing iSCSI LUN failover across a 4-node FAS9000 fabric-attached MetroCluster configuration.
In this scenario, which front end configuration is required for non-disruptive host LUN failover between sites?
Answer: A
NEW QUESTION 15
You are configuring a FAS8300 HA pair running ONTAP 9.8 with two hosts that requires SAN LUNs. The cluster is in a secure data center without switches. In this scenario, which block protocol is supported on the hosts?
Answer: B
Explanation:
Direct-attachment
In a direct-attached configuration, one or more hosts are directly connected to the controllers. You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=/com.netapp.doc.dot-cm-sanconf/GUID-193CC377-5C
NEW QUESTION 16
During testing, an administrator notices that the wrong subsystem was returned using the NVMe discover command. The administrator was expecting test0_subsystem as the subsystem
Referring to the exhibit, what would cause the discrepancy?
Answer: A
Explanation:
We can discard that ANA was not properly configured becase this is not a problem about multipathing. We can discard WWPN because this is an NVMe configuration where WWPN is not involved
We can discard that NVMe was not configured because we wouldn't be able to even run that command if that's true
Configure the NQN correctly is one of the steps when we configure NVMe You can find more information on this link:
http://senthil-it-infrastructure.blogspot.com/2020/05/netapp-ontap-97-nvme-configuration-and.html
NEW QUESTION 17
......
P.S. Allfreedumps.com now are offering 100% pass ensure NS0-520 dumps! All NS0-520 exam questions have been updated with correct answers: https://www.allfreedumps.com/NS0-520-dumps.html (234 New Questions)