Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 1)
How is the FortiGate password recovery process?
A. Interrupt boot sequence, modify the boot registry and reboot. After changing the password, reset the boot registry.
B. Log in through the console port using the “maintainer” account within several seconds of physically power cycling the FortiGate.
C. Hold down the CTRL + Esc (Escape) keys during reboot, then reset the admin password.
D. Interrupt the boot sequence and restore a configuration file for which the password has
been modified.
Answer: B
Q2. - (Topic 9)
Which two web filtering inspection modes inspect the full URL? (Choose two.)
A. DNS-based.
B. Proxy-based.
C. Flow-based.
D. URL-based.
Answer: B,C
Q3. - (Topic 6)
An administrator has configured a route-based site-to-site IPsec VPN. Which statement is correct regarding this IPsec VPN configuration?
A. The IPsec firewall policies must be placed at the top of the list.
B. This VPN cannot be used as part of a hub and spoke topology.
C. Routes are automatically created based on the quick mode selectors.
D. A virtual IPsec interface is automatically created after the Phase 1 configuration is completed.
Answer: D
Q4. - (Topic 17)
Which statement describes what the CLI command diagnose debug authd fsso list is used for?
A. Monitors communications between the FSSO collector agent and FortiGate unit.
B. Displays which users are currently logged on using FSSO.
C. Displays a listing of all connected FSSO collector agents.
D. Lists all DC Agents installed on all domain controllers.
Answer: B
Q5. - (Topic 9)
Which statements are correct regarding URL filtering on a FortiGate unit? (Choose two.)
A. The allowed actions for URL filtering include allow, block, monitor and exempt.
B. The allowed actions for URL filtering are Allow and Block only.
C. URL filters may be based on patterns using simple text, wildcards and regular expressions.
D. URL filters are based on simple text only and require an exact match.
Answer: A,C
Q6. - (Topic 12)
A FortiGate is configured with multiple VDOMs. An administrative account on the device has been assigned a Scope value of VDOM:root.
Which of the following settings will this administrator be able to configure? (Choose two.)
A. Firewall addresses.
B. DHCP servers.
C. FortiGuard Distribution Network configuration.
D. System hostname.
Answer: A,B
Q7. - (Topic 11)
Examine the exhibit; then answer the question below.
The Vancouver FortiGate initially had the following information in its routing table: S 172.20.0.0/16 [10/0] via 172.21.1.2, port2
C 172.21.0.0/16 is directly connected, port2 C 172.11.11.0/24 is directly connected, port1 Afterwards, the following static route was added: config router static edit 6 set dst 172.20.1.0 255.255.255.0 set pririoty 0 set device port1 set gateway 172.11.12.1 next end Since this change, the new static route is NOT showing up in the routing table. Given the
information provided, which of the following describes the cause of this problem?
A. The subnet 172.20.1.0/24 is overlapped with the subnet of one static route that is already in the routing table (172.20.0.0/16), so, we need to enable allow-subnet-overlap first.
B. The 'gateway' IP address is NOT in the same subnet as the IP address of port1.
C. The priority is 0, which means that the route will remain inactive.
D. The static route configuration is missing the distance setting.
Answer: B
Q8. - (Topic 15)
Review the IPsec phase 1 configuration in the exhibit; then answer the question below.
Which statements are correct regarding this configuration? (Choose two.)
A. The remote gateway address on 10.200.3.1.
B. The local IPsec interface address is 10.200.3.1.
C. The local gateway IP is the address assigned to port1.
D. The local gateway IP address is 10.200.3.1.
Answer: A,C
Q9. - (Topic 22)
Which is one of the conditions that must be met for offloading the encryption and decryption of IPsec traffic to an NP6 processor?
A. No protection profile can be applied over the IPsec traffic.
B. Phase-2 anti-replay must be disabled.
C. Both the phase 1 and phases 2 must use encryption algorithms supported by the NP6.
D. IPsec traffic must not be inspected by any FortiGate session helper.
Answer: C
Q10. - (Topic 15)
Review the IKE debug output for IPsec shown in the exhibit below.
Which statements is correct regarding this output?
A. The output is a phase 1 negotiation.
B. The output is a phase 2 negotiation.
C. The output captures the dead peer detection messages.
D. The output captures the dead gateway detection packets.
Answer: C
Q11. - (Topic 14)
An administrator has formed a high availability cluster involving two FortiGate units.
[ Multiple upstream Layer 2 switches] -- [ FortiGate HA Cluster ] -- [ Multiple downstream Layer 2 switches ]
The administrator wishes to ensure that a single link failure will have minimal impact upon the overall throughput of traffic through this cluster.
Which of the following options describes the best step the administrator can take?
The administrator should _____________________.
A. Increase the number of FortiGate units in the cluster and configure HA in active-active mode.
B. Enable monitoring of all active interfaces.
C. Set up a full-mesh design which uses redundant interfaces.
D. Configure the HA ping server feature to allow for HA failover in the event that a path is disrupted.
Answer: C
Q12. - (Topic 1)
What capabilities can a FortiGate provide? (Choose three.)
A. Mail relay.
B. Email filtering.
C. Firewall.
D. VPN gateway.
E. Mail server.
Answer: B,C,D
Q13. - (Topic 4)
When firewall policy authentication is enabled, which protocols can trigger an authentication challenge? (Choose two.)
A. SMTP
B. POP3
C. HTTP
D. FTP
Answer: C,D
Q14. - (Topic 18)
When the SSL proxy is NOT doing man-in-the-middle interception of SSL traffic, which certificate field can be used to determine the rating of a website?
A. Organizational Unit.
B. Common Name.
C. Serial Number.
D. Validity.
Answer: B
Q15. - (Topic 14)
In HA, the option Reserve Management Port for Cluster Member is selected as shown in the exhibit below.
Which statements are correct regarding this setting? (Choose two.)
A. Interface settings on port7 will not be synchronized with other cluster members.
B. The IP address assigned to this interface must not overlap with the IP address subnet assigned to another interface.
C. When connecting to port7 you always connect to the master device.
D. A gateway address may be configured for port7.
Answer: A,D
Q16. - (Topic 18)
Which tasks fall under the responsibility of the SSL proxy in a typical HTTPS connection? (Choose two.)
A. The web client SSL handshake.
B. The web server SSL handshake.
C. File buffering.
D. Communication with the URL filter process.
Answer: A,B