CompTIA jn0-361 Free Practice Questions

NEW QUESTION 1
What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)

• A. Ensure that all routers on a shared segment are configured with a priority value of 0.
• B. Use an interface type of p2p when possible.
• C. Segment large groups of routers into areas.
• D. Change a stub area to NSSA when possible.

Answer: BC

NEW QUESTION 2
You asked to deploy a large-scale IS-IS network with multiple areas. In this scenario, which two statements are true? (Choose two.)

• A. The area IDs must be the same for Level 2 routers to from an adjacency.
• B. Level1 routers can from an adjacency with any other Level 1 router.
• C. Level1 routers can from an adjacency with any other Level 2 router.
• D. The area IDs must be the same for Level1 routers to from an adjacency.

Answer: BD

NEW QUESTION 3
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)

• A. PDUs contain different TLVs.
• B. TLVs contain different PDUs.
• C. The TLV attributes are type, length, and value.
• D. The TLV attributes are tim
• E. Length, and variable.

Answer: AC

NEW QUESTION 4
You must configure an MX Series device to receive and forward a mixture of single-tag and dual-tag frames on interface xe-0/0/0.
In this scenario what will accomplish goal?

• A. xe-0/0/0 {flexible-vlan-tagging;}
• B. xe-0/0/0 {stacked-vlan-tagging;}
• C. xe-0/0/0 {vlan-vci-tagging;}
• D. xe-0/0/0 {vlan-tagging;}

Answer: A

NEW QUESTION 5
What must be configured for all IBGP speakers in an AS to have consistent routing information?

• A. Partial mesh of EBGP sessions between EBGP speakers
• B. Default routes to the IBGP gateways
• C. Static routes to the EBGP gateways
• D. Full mesh of IBGP sessions between IBGP speakers

Answer: D

NEW QUESTION 6
Click the Exhibit.

You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will become active?

• A. Route2
• B. Route3
• C. Route4
• D. Route1

Answer: D

NEW QUESTION 7
Which standards-based election protocol facilities redundancy in a LAN environment by eliminating a single point failure through the use of master and backup routers?

• A. VRRP
• B. BFD
• C. graceful restart
• D. ISSU

Answer: A

NEW QUESTION 8
Click the Exhibit.


You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping. Referring to the exhibit, which two would you take to solve this problem? (Choose two.)

• A. Add a specific static route to the local peer’s network with the remote devices’loopback address as the next-hop gateway.
• B. Add a specific route to the remote device’s loopback address with the next-hop devicedefined as the next-hop gateway.
• C. Set the GRE interface with a larger TTL value.
• D. Remove the existing 192.168.2.0/30 static route.

Answer: BD

NEW QUESTION 9
An IS-IS TLV includes which two attributes? (Choose two.)

• A. Topology
• B. Vector
• C. Length
• D. Value

Answer: CD

NEW QUESTION 10
Click the Exhibit.

Referring to the configuration shown in the exhibit, which statement is true?

• A. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.
• B. Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3
• C. Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.
• D. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.

Answer: D

NEW QUESTION 11
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)

• A. Hello interval
• B. Designated route
• C. Router priority
• D. Network mask

Answer: AD

NEW QUESTION 12
Click the Exhibit.



Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?

• A. 100.0.1/32 and 100.0.20.1/32
• B. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
• C. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
• D. 100.0.20.1/32

Answer: B

NEW QUESTION 13
You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?

• A. Configure ultimate-hop-popping on the egress device.
• B. Configure implicit-null on all MPLS-enabled devices.
• C. Configure explicit-null on all MPLS-enabled devices.
• D. Configure entropy-label on the egress device.

Answer: C

NEW QUESTION 14
Click the exhibit.

You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)

• A. Configure an IPv6 address on the appropriate interface.
• B. Configure the rib inet6.0 statement under the BGP group.
• C. Configure an IPv6 neighbor address under the BGP group.
• D. Configure an IPv6 local address under the BGP group.

Answer: AC

NEW QUESTION 15
Click the exhibit.

You have configured OSPF between two routers. The OSPF adjacency will not form. Referring to the exhibit, what is the problem?

• A. Router is not receiving hellos on the configured interface.
• B. The OSPF version does not match on the configured interfaces.
• C. The router is not sending hellos on the configured interface.
• D. The area does not match on the configured interfaces.

Answer: D

NEW QUESTION 16
What is the TTL value for EBGP?

• A. 64
• B. 48
• C. 255
• D. 1

Answer: D

NEW QUESTION 17
Which statement is true when using VLANs in a bridge domain on an MX Series device?

• A. The VLAN tags of the received packet are always translated.
• B. Only outer VLAN tags can be normalized.
• C. The VLAN tag of the received packet must match the VLAN tags associated with one of the logical interfaces.
• D. Outer and inner VLAN tags always checked at egress.

Answer: C

NEW QUESTION 18
You are using RSVP to signal an MPLS LSP. Which statement is true in this scenario?

• A. LSPs can be configured without any traffic engineering constraints.
• B. The traffic engineering database must be used for all LSPs.
• C. A primary path must be configured to establish an LSP.
• D. A secondary path must be configured to establish an LSP.

Answer: A

NEW QUESTION 19
Click the Exhibit.

Referring to the configuration in the exhibit, which statement is true?

• A. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
• B. The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route 192.168.5.0/24 to be active.
• C. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
• D. The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.

Answer: B

NEW QUESTION 20
Click the Exhibit.

Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?

• A. Apply the next-hop-self as an export policy to the external BGP peers.
• B. Apply the next-hop-self as an import policy to the external BGP peers.
• C. Apply the next-hop-self as an export policy to the internal BGP peers.
• D. Apply the next-hop-self as an import policy to the internal BGP peers.

Answer: C

NEW QUESTION 21
Click the Exhibit.


Referring to the exhibit, which statement is correct about MVRP?

• A. AS1’s VLAN ID list is missing an entry for VLAN 300.
• B. ES2 is not interested in VLAN 300.
• C. AS1 is not allowing ES2 access to VLAN 300.
• D. ES1 is not advertising VLAN 300 to AS1.

Answer: B

NEW QUESTION 22
......